[Bumbleboy92]

Added OEM black lug nuts

[2SS Capt]

Originally Posted by Bumbleboy92

Added OEM black lug nuts

Attachment 1162320
Attachment 1162322
Attachment 1162321
Attachment 1162323

Much better, looks great!

[DamonZ28]

Originally Posted by 2018 Blue 1LE

Added a Sequenced third brake light with lighted switch and inline fuse.

So what's the switch for? To turn your sequenced brake light on & off?

[p47dman]

Started to cover knee bolsters with new material and 1/8" foam pad.

[willzilla]

Originally Posted by 2018 Blue 1LE

https://photos.app.goo.gl/nDMyFow6UXk1Ncxa9

Shift knob from Speedawg.

Added the foot well lighting.
Driver's side is zip tied for now. The hole it is supposed to go in is blocked top and bottom with wiring harnesses. Even if it wasn't, not sure the plug would survive with the clutch there and there is no room to go the other way.
Colors are the same, just a camera compensation for some reason.

Added a Sequenced third brake light with lighted switch and inline fuse.

Not sure why the photos went sideways here.

Looks good!!

[willzilla]

Originally Posted by DamonZ28

So what's the switch for? To turn your sequenced brake light on & off?

Most likely it lets you enable "show mode" which can play a different pattern or whatever when parked. That's how I have mine setup.. I can park and shut off car and enable show mode and it does a cool effect

[NjaTrtl]

Originally Posted by Bumbleboy92

Added OEM black lug nuts

Attachment 1162320
Attachment 1162322
Attachment 1162321
Attachment 1162323

Amazing how such a little part can make such big improvement.

I ordered mine with the black lugs/locks and I'm always amazed at how many car manufacturers don't automatically include them with black/dark wheels.

[2018 Blue 1LE]

Originally Posted by DamonZ28

So what's the switch for? To turn your sequenced brake light on & off?

BRAKE = this pattern is activated upon hitting the brakes. This pattern will run for 3 seconds and then ALL the LEDs will come on solid until you let off the brake.
SHOW = this pattern is activated when the "show" wire is connected to any 12V+ source, this can be done using our Show Mode Easy Install Kit (sold separately), a switch at your dash or connected directly to your vehicles tail/running lights. Connection must be a 12V POSITIVE source. If the SHOW mode is on, and you hit the brake, the BRAKE pattern will always override the SHOW pattern for as long as the brake is held down. The show pattern will resume once the brake is released. The show pattern is a continuous sequence.


Copied from their website.


https://seequenced.com/collections/f...39289022546005

[PowerDemon]

Originally Posted by arpad_m

I upgraded my phone to a (used) Samsung S23 that finally came within my hard budget ($199) after discounts, and guess what, IT FITS PERFECTLY on the wireless charging pad after trimming the long edge end caps, which I already did years ago.

Yes, we all know GM effed up with this constrained design, but where there is a will, there is a way. If one wants, they can wirelessly charge a reasonably modern phone and use wireless Android Auto with 6th gen Camaros, even pre-refresh ones.

You got a link to a post on how to do this mod? I was always irritated my 15 Pro Max doesn’t fit. I think it’s about as big as an S23.

[arpad_m]

Originally Posted by PowerDemon

You got a link to a post on how to do this mod? I was always irritated my 15 Pro Max doesn’t fit. I think it’s about as big as an S23.

Yup, it's trivial if you have a sharp utility knife or an X-Acto, check out this thread: https://www.camaro6.com/forums/showthread.php?t=611789

The S24 and S25 should fit as well, they aren't significantly larger than the S23. Big slappers like the plus and the ultra won't fit, of course.

[PowerDemon]

Originally Posted by arpad_m

Yup, it's trivial if you have a sharp utility knife or an X-Acto, check out this thread: https://www.camaro6.com/forums/showthread.php?t=611789

The S24 and S25 should fit as well, they aren't significantly larger than the S23. Big slappers like the plus and the ultra won't fit, of course.

Ah I have a Max which I think is about the same size as an Ultra :(

How do you remove the rubber mat to trim it? Can I just pull it out?

Edit: Kept reading and figured it out. Thanks

[2018 Blue 1LE]

It's raining, so just some quick shots between the drops.

[2018 Blue 1LE]

Originally Posted by arpad_m

Yup, it's trivial if you have a sharp utility knife or an X-Acto, check out this thread: https://www.camaro6.com/forums/showthread.php?t=611789

The S24 and S25 should fit as well, they aren't significantly larger than the S23. Big slappers like the plus and the ultra won't fit, of course.

This mod to the rubber is only going to work if the phone will fit inside the hard plastic of the console.


At this time, both phones I have are too big to sit inside the plastic and therefore the mod is pointless.


I am thinking of getting the cubby and adding a charger port to it that you can plug a cord into.
I am thinking of using the power supply for the wireless charger that I am removing.

[Ryanbabz71]

Just got back from vacation and had to go for a drive after driving a 4 cylinder VW atlas for a week . This car is insane with 200 more hp than my previous SS

Also added the trunk pull




Sent from my iPhone using Tapatalk Pro