[SS 1LE]

Originally Posted by Tomiboy

Do you have a front splitter like the 1LE?

This, the splitter makes my Rhino ramps not even close to working without "help".

[Firefighter]

I looked and looked... other than making some ramps work Race Ramps are it. I think I got the 56". Amazon had the best prices.

They give you a method to measure on their web site with a yard stick.

Spring for the 2 piece ones.

Sent from my SM-G935V using Tapatalk

[Sub]

Ah, yah the rhinos wouldnt work with a front splitter - my rubber guards rubbed gently on the way up. A piece of wood the height of the spoiler would work as suggested.

[SS 1LE]

Originally Posted by Firefighter

I looked and looked... other than making some ramps work Race Ramps are it. I think I got the 56". Amazon had the best prices.

They give you a method to measure on their web site with a yard stick.

Spring for the 2 piece ones.

Sent from my SM-G935V using Tapatalk

So 56" two piece it is...

[Firefighter]

Originally Posted by SS 1LE

So 56" two piece it is...

I just realized this is the 6th Gen board I have a 5th Gen 1LE lowered 1". They work great for my car and the wife's G8 GT.

Verify the needed length.

I think you should be fine though.

Sent from my SM-G935V using Tapatalk

[DenverTaco07]

Race Ramps RR-56-2

the -2 = 2 piece.

Amazon $247

I have them and everything cleared.

[Firefighter]

Originally Posted by Rockmonstir

^^^This

That's what I used to do until I added a ZL1 pan. I'd raise it by the cross member and throw jack stands under the jack points, using Jack Pads from ZL1 Add Ons.

Fun fact.... Adding that pan improved my MPG by 2mpg. Seriously I wasn't expecting it but I'll gladly take it.

Sent from my QTAIR7 using Tapatalk

[glamcem]

not to hijack or anything but $240 is a lot of money for oil changes (only) IMO.
Have you ever considered getting some good quality jack stands so that you can also change tires, brakes, bleed ..etc?

I couldn't be happier with these stands (combined with ZL1addons lift points of course) compared to other jack stands, it's a lot easy and quick to place them since they're flat, rubber and works great with the lift points

[Firefighter]

Originally Posted by glamcem

not to hijack or anything but $240 is a lot of money for oil changes (only) IMO.
Have you ever considered getting some good quality jack stands so that you can also change tires, brakes, bleed ..etc?

I couldn't be happier with these stands (combined with ZL1addons lift points of course) compared to other jack stands, it's a lot easy and quick to place them since they're flat, rubber and works great with the lift points

What's stands are those? They're nice.

Sent from my SM-G935V using Tapatalk

[glamcem]

Originally Posted by Firefighter

What's stands are those? They're nice.

Sent from my SM-G935V using Tapatalk

Those are Esco jack stands. The best jack stands I've ever owned and combined with ZL1addons liftpoints it only takes a few minutes the jack the car from both sides

http://www.usatoolwarehouse.com/usat...pPwaAgby8P8HAQ

[Firefighter]

Originally Posted by glamcem

Those are Esco jack stands. The best jack stands I've ever owned and combined with ZL1addons liftpoints it only takes a few minutes the jack the car from both sides

http://www.usatoolwarehouse.com/usat...pPwaAgby8P8HAQ

I remember once seeing a video of a guy with jack stands that actually raised the vehicle. Of course I can't fi d them anymore.

Problem with these cars is there's so few jacking points you raise the car then have no place to put tue stand. I had a good system that went out the door once the belly pan went on.

Sent from my SM-G935V using Tapatalk

[Camaro_Corvette]

Originally Posted by Firefighter

What's stands are those? They're nice.

Sent from my SM-G935V using Tapatalk

Come on man. The time you spent typing that question, you could have surely of used your own deductive reasoning skills to answer your own question.

[Firefighter]

Originally Posted by Camaro_Corvette

Come on man. The time you spent typing that question, you could have surely of used your own deductive reasoning skills to answer your own question.

Bruh... I was working at the time. No time to search for jack stands.

Thanks for playing though...

Sent from my SM-G935V using Tapatalk

[Camaro_Corvette]

Originally Posted by Firefighter

Bruh... I was working at the time. No time to search for jack stands.

Thanks for playing though...

Sent from my SM-G935V using Tapatalk

I thought I knew all the guys that work on Camaro5 & Camaro6.com. Didn't know you worked here as well.