Initial Prospective (warranty-safe) Mod List:
MGW Shifter ( waiting to hear back about Gen 6 Shifter)
I realize the 1LE comes with a short shifter… my concern is OEM uses alot of plastic parts for easy cost effective manufacturing… MGW makes rifle bolts…. So I think I’ll stick with them
https://www.mgwshifters.com/about-mgw
Centreforce Lightweight Twin Disc Clutch ( -16 lbs of rotating mass) [$1800 b4 install]
http://www.camaro6.com/forums/showthread.php?t=463797
http://www.camaro6.com/forums/showpo...19&postcount=4
http://www.centerforce.com/products/...in-disc-clutch
Carbon Fibre Driveshaft (aprox -50 lbs of rotating mass) [$1300 b4 install… when M6 version released)
Rotating mass is 3 times harder to accelerate than normal mass… so any weight reduction is can be considered almost 3 times less weight
http://www.phastekperformance.com/DS...t-gmca18-c.htm
If the CF Drive shaft doesn't work out... there's an Aluminum one rated to 900 hp for a 7-10 lb ROTATING mass savings...
https://gforce1320.com/product/6th-g...eshaft-manual/
Vitesse Speed Controller
http://www.corvetteforum.com/forums/...er-review.html
LIGHTWEIGHT BATTERY SUITABLE TO WINTERS AND DAILY DRIVING....
one contender....
https://www.amazon.com/Odyssey-PC680...%23+ODY+PC680T
Gorilla Black Locking Lug nuts ( lighter than stock) 11.9 oz per wheel instead of 13.2 oz rotating mass per wheel
http://www.phastekperformance.com/20...-locks-blk.htm
http://www.camaro6.com/forums/showpo...2&postcount=31
Red Tail Performance #RTP-030B Black Powder Coated Exhaust Muffler Tip Round Forward Slash Cut Rolled Inward Double Wall 2.25" Inlet / ID, 4" Outlet Exhaust Tips
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
http://www.camaro6.com/forums/showthread.php?t=467964
2SS Radio-Nav with LPO Dark Knight Ambient Lighting (want smartphone independent NAV and full ambient lighting)
(1SS radio has only White LED harness, require chip swap from footwell ambient lighting to activate full lighting on radio strip)
DIY coming soon, thread here:
http://www.camaro6.com/forums/showthread.php?t=475561
(curious if 2SS owner could chime in on how the GPS Nav functions on the HUD)
there are several threads on the Camaro5 subforum that feature nav radio refits.... I'm hoping its just a matter of time before the Gen6 starts seeing these available..
http://www.gen5diy.com/Gen6-Navigation-Upgrade8-screen/
http://www.gen5diy.com/Chevrolet/Cam...ation-Package/
http://www.thatgmpartsguy.com/chevro...m-illumination
$745
$899.99
$989.99
Blindspot mirrors (simple add-on... no need for $$$ tech ... lol)
https://www.amazon.ca/Adjustabe-Ampp.../dp/B01GDQ2G4W
COSMETIC/INTERIOR CHANGES
I hate chrome....
http://www.gen5diy.com/Chevrolet/Cam...Shifter-Bezel/
REAR SEAT DELETE - 28 lbs (will probably keep seat bottoms since they only weigh 4 lbs)
replace with mesh screen to clean up the rear area.
Front Licence Stow and Go (if I eventually need it...long story)
http://www.phastekperformance.com/ST...nse-sns89a.htm
Front Bowtie Delete
http://www.camaro6.com/forums/showthread.php?t=479114
Front SS Delete
http://www.camaro6.com/forums/showthread.php?t=479830
Trunk close pull strap
http://www.camaro6.com/forums/showthread.php?t=458277
EXTERIOR LIGHTS
TINTING REAR TAIL LIGHTS
Phastek Oracle Colored LEDs
Having a programmed sequence to switch rapidly between red and blue when that RV refuses to let you by on a long twisty single land canyon road… :3
http://www.phastekperformance.com/20...drl-lights.htm
Headlight Black out film ( $10)
http://www.phastekperformance.com/20...headlight1.htm
Replace Stock Recaros with lighter seats (looking for stock weights to see if this worthwhile)
Custom Seat Heater and Fan for Lightweight Race/Tour Seats
Possible contenders:
Cobra Misano (24 lbs, great bolsters, full tilt so flexible use for passenger as well)
http://www.corvetteforum.com/forums/...er-tracks.html
Cobra Suzuka GT w/ Pro-Fit System and Outlast Cooling Technology
http://www.speedhunters.com/2015/05/...t-of-your-car/
This is Outlast – a temperature-regulating textile. It’s a micro-capsule system and as you sit down they draw the heat away from your body. The molecule goes from being hard to liquid form, then it imparts it back to you when you’re cold. It smooths the corridor of your body heating and cooling, and it’s technology that’s often used in race seats. Developed by NASA and used by people like the Israeli bomb disposal squad in their fatigues, as I hold onto it with my warm hand, it starts to feel cool in seconds.
HARNESS BAR
http://www.bkauto.com/6th_Gen_Camaro_s/386.htm
http://www.bkauto.com/Harness_Mounti...2016_s/387.htm
possibly Roll cage later....
https://studiorsr.com/collections/ca...roll-bar-gen-6
[B]PEDALS
http://www.ultimatepedals.com/chevro...nual_basic.php
( for when I feel like Rev Matching it myself)
https://www.subesports.com/momo/goth...al/mom-got1110
Hardwiring seat fans and heater pads
http://www.camaro6.com/forums/showpo...5&postcount=17
STEERING WHEEL
Yellow Centring Stripe
BADGES
1LE
http://www.emblempros.com/inc/sdetail/3448/32769
Oil for track and DD:
Gray Area Mod List ( warranty threatening?)
Roto- Fab CAI ( thanks to Sledgehammer 70 for his videos and testing)
Full Exhaust System ( looking for lightest and good sound….. Any suggestions?
Porting TB, Manifold
( or go full out with engine mods and add MSI Atomic Manifold for 500WHP build)
WARRANTY EXPIRED ENGINE MODS
New CAMSHAFT, AFM Delete, new heads? …..any suggestions and shop recommends?
I’ve hear alot of great stuff so far about Cunningham Motorsports
http://www.cunningham-motorsports.com/