05-02-2020, 11:42 PM | #1 |
Craig
Drives: 2019 ZL1 1LE Join Date: Jan 2019
Location: Peterborough, ON Canada
Posts: 400
|
Apparently really good Headers for the price!
So Jeremy at Fasterproms made a video with a 2020 ZLE and they used these headers: https://www.speed-engineering.com/
The only thing is they only come with the Catless IF you buy the entire kit. I have the Corsa Extreme+ Catback and don’t need all of it and want catted mids or it would be too loud lol. Any ideas? What mids would work with those 2” headers and the Corsa? Video: https://youtu.be/ZVvlRMZhK1w
__________________
|
05-02-2020, 11:55 PM | #2 |
Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,236
|
Has anyone used speed engineering headers? Where are they made? How was the fitment?
|
05-03-2020, 07:34 AM | #3 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 5,107
|
Those have to be Chinese headers at that price...
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
05-03-2020, 09:13 AM | #4 |
Drives: 2016 2SS Convertible Join Date: May 2012
Location: St. Louis, MO
Posts: 1,730
|
Search the forums for header reviews. There are good and bad reviews about them. Multiple comparisons and reviews for all brands if you're in the market for headers.
|
05-03-2020, 01:00 PM | #5 |
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 5,043
|
Speed Engineering = Maryland Speed?
|
05-03-2020, 04:07 PM | #6 |
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,067
|
I have heard good and bad about quality and fit. IMHO, with long tube headers you get what you pay for. Kooks and ARH are pricey, but the quality of construction and fit are top notch. I would not cut corners on LTs.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
05-03-2020, 06:48 PM | #7 |
Drives: 2017 Camero ZL1 Join Date: Nov 2015
Location: Texas
Posts: 130
|
The current fastest sixth gen has Speed Engineering headers. Fitment might be hit or miss but must be fine power wise.
__________________
2017 ZL1 A10
Dyno/Quarter Mile/Dragy 9.71@141.2 MPH so far. 2007 Z06 H/C/I/E Half Mile - 169 MPH. Sold. |
05-03-2020, 07:36 PM | #8 |
Drives: CTV5 V Blackwing on order Join Date: Feb 2020
Location: East TN
Posts: 431
|
Please don't tell me Maryland Speed has resurfaced under a different name?
__________________
2022 CT5 V Blackwing with A10
2021 GMC Denali pickup with 6.2 and A10 2017 Ford Expedition |
05-03-2020, 08:16 PM | #9 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
They'll all make about the same power. But the the quality of the stainless steel and the quality of the welds and design are better with Kooks or ARH.
__________________
Bryan 2018 ZL1 M6
|
05-04-2020, 02:00 AM | #10 |
Drives: 2018 ZL1, 2001 Z28 1LE Join Date: Dec 2013
Location: North, TX
Posts: 30
|
|
05-04-2020, 06:05 AM | #11 |
Drives: 18 Z1E - 18 Raptor - 17 Jeep SRT Join Date: Dec 2019
Location: FL
Posts: 82
|
I ordered some valve covers from them, and they accidentally shipped me headers. The packaging on the headers needs some serious attention. They were thrown in cheap plastic bags and put in a box without any protection. By the time the box got from California to me in Florida, the box was also destroyed. If I was sent a set of headers that came in looking like that, I would be pretty upset. The valve covers, on the other hand, were packaged perfectly once they arrived.
|
05-04-2020, 04:05 PM | #12 |
Drives: 2017 ZL1 Join Date: Jan 2020
Location: Blackwood. nj
Posts: 9
|
I just installed 2" SE headers with there xpipe on my 2016 ss. I had no issues what so ever. Theres plenty of room on the x pipe to put in cats.I ordered them from summit high flow cats 89.00 each stainless steel.
|
05-04-2020, 04:14 PM | #13 |
Resident Land Surveyor
Drives: 2016 Camaro 1SS - Summit White M6 Join Date: Aug 2016
Location: Henryetta/Tulsa - Oklahoma
Posts: 588
|
They have headers for older C10 LS swaps, so I got them for my brother's truck. Agree with above statements on the packaging, it was garbage and the box looked like it was in a war. No damage that we could see to the headers though, and they were pretty good quality for the price. They've been on his truck for about 2 years now with no issues.
Can't speak for Camaro specific.
__________________
2016 Summit 1SS 49th Anniversary Commemorative Limited Plutonium Edition - M6, Solo Axleback & !RearCats, Ultra-Rare Cloth Seats, Forgestar CF5V 19x10-285/35 19x11-325/30
2001 NBM Trans Am WS6, Wifey's Grocery Getter - Torquer V2 cam, Racetronix Fuel Pump, Yank 3000 Stall, Transgo 1-2 kit, TSP LTs, Magnaflow, Strano Springs/Koni STR.T shocks, 17x9.5/17x11 TTIIs, Ed Wright tuned |
|
|
Post Reply
|
|
|