09-21-2018, 03:57 PM | #1 |
Drives: 2016 Camaro 2.0t Join Date: Jul 2017
Location: Grand Rapids
Posts: 97
|
New high score: 558whp!
Guys at ZZP raised the bar again. This is the same setup as the 503 pull. 600 coming to a dyno soon.
|
09-21-2018, 04:01 PM | #2 |
Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008
Location: Central Point, OR
Posts: 5,688
|
Hmmm who will hit 600 first? ZZP or the guys in Russia?
Word on the street is the Russians have an unlocked TCM on the way to them, hoping there was something holding them back from making more power in that "fake news" 2017 car. Here's your video |
09-21-2018, 04:55 PM | #3 |
Drives: 1.4T Airboat, 2.0T Airboat (soon) Join Date: Jul 2018
Location: Louisiana
Posts: 29
|
WHP or corrected to the crank?
|
09-21-2018, 09:01 PM | #4 |
Drives: 2018 2SS Join Date: Oct 2017
Location: Grand rapids, MI
Posts: 219
|
WHP. like the title says
|
09-22-2018, 10:13 AM | #5 |
Drives: 1.4T Airboat, 2.0T Airboat (soon) Join Date: Jul 2018
Location: Louisiana
Posts: 29
|
|
09-22-2018, 10:58 AM | #6 |
603 Camaros
Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012
Location: Manchester, NH
Posts: 6,779
|
Impressive numbers and times.
__________________
MY 2017 I4 CAMARO BUILD JOURNAL | YOUTUBE | INSTAGRAM | 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE | 12.693s @ 105MPH 1/4 Mile |
09-24-2018, 09:48 AM | #7 |
Drives: 2017 Cadillac ATS Join Date: Sep 2017
Location: TX
Posts: 65
|
Awesome! Way to go! Is this on a tubular manifold or a stock manifold and z54? GMlive did an article on this car and the picture shows what looks to be a z54 turbo but their description said tubular manifold and s257 borg warner.
|
09-24-2018, 11:06 AM | #8 |
Drives: 2018 2SS Join Date: Oct 2017
Location: Grand rapids, MI
Posts: 219
|
This is on a tubular manifold with an S257 turbo currently. the photos were taken by GM EFI when it had the Z54 on it.
|
09-24-2018, 06:04 PM | #9 |
Drives: 2018 Camaro 1SS Join Date: Jun 2018
Location: DFW
Posts: 422
|
Oh damm look at that torque! This looks damm fun!
__________________
2018 1SS 6MT: SOLD
|
09-25-2018, 08:58 PM | #10 |
Drives: ats Join Date: Aug 2016
Location: syracuse
Posts: 44
|
lets see some engine bay pictures
|
09-26-2018, 08:12 AM | #11 |
Drives: 2017 Cadillac ATS Join Date: Sep 2017
Location: TX
Posts: 65
|
Do you guys have any engine bay pictures? Thats would be great to see? Would I be right to assume this power level is out of the level of the z54 but not the zfr7163?
|
09-26-2018, 07:19 PM | #12 |
ATS 2.0T
Drives: 2013 Cadillac ATS Join Date: May 2018
Location: Northern New Jersey
Posts: 97
|
So when can we buy said manifold please
|
09-27-2018, 09:35 AM | #13 |
Drives: 2018 2SS Join Date: Oct 2017
Location: Grand rapids, MI
Posts: 219
|
This is a 1 off manifold that we built for the SEMA ATS like 4 years ago, so it will not be going into mass production.
Im working on getting a couple underhood pictures. should be able to get out there later today. |
09-27-2018, 06:22 PM | #14 |
ATS 2.0T
Drives: 2013 Cadillac ATS Join Date: May 2018
Location: Northern New Jersey
Posts: 97
|
So when can we expect a tubular manifold production.? Will you guys start that? How about intake manifold?
|
|
|
Post Reply
|
|
|