[brutusvk]

I sent one too

[reeper]

Are there any issues with install if I have a ground effects package? I currently have quad tip NPP

[mlee]

Originally Posted by david borla

Just for the record regarding drone.

Our new products do not drone, zero drone, no drone, or however you'd like to say it.

By new products, I mean anything designed since around 2011.

With that said, we've also gone back and tuned the drone out of many of our older systems and we continue to work our way back through our catalog to identify the older systems that need to have the drone tuned out. For instance, we completely redesigned all of our C5 and C6 Corvette stuff to tune out drone a few years ago.

ATAK patent came in 2010 as well.

So, we've completely refreshed and renewed our muffler designs over the past 6 years or so.

I just submitted a new patent design for controlling the tonality of an exhaust system and that has been approved as "patent pending". So look for more improvements to come. It's a radically different approach that's never been done before.

The reason I mention all of this is because I want you guys to know that we're committed to continuously improving our parts. Not just with drone but everything we do.

Anyhow, our new Camaro stuff has zero drone as is the case with all of our releases in the last 5 years. Soon we'll have an entire catalog that's free of drone.

Even though we've been around for almost 40 years we're light years ahead of where we were just a few years ago and continue to improve our technology.

We look forward to the challenges that lie ahead and we'll always strive to make you guys even happier than you were the last time.

This is awesome and I had no idea drone had been addressed. Always been a big fan of the Borla product and their support here and at our CamaroFests, but just couldn't pull the trigger on a system due to drone.

Thanks for the post!!!

[ForgedReality]

Still too ****ing quiet. Open long-tubes or nothin'.

[EDFHOBBIES]

Just finished filming with All Girls Garage.. you will hear an initial start up of the ATAK and some passes on the roads.. show will air Oct 1st.

[Android42019]

Anyone else need new boxers?

[Richkidd87]

So Borla makes long tube headers for the 6th gen camaro SS now and they didn't announce it I'm hurt �������������� I've been a loyal customer

[EDFHOBBIES]

Borla ATAK at Texas Motor Speedway sounded very awesome friend in the club posted it I found an app to pull it off FB live. The 16 can be heard on back stretch the in turn 1 where we entered.. I was behind my wife in the TT borla atak 5th gen.. mine sounds wimpy :(

https://youtu.be/UoWC62KU54M

[Lisa@Borla]

Originally Posted by Richkidd87

So Borla makes long tube headers for the 6th gen camaro SS now and they didn't announce it I'm hurt �������������� I've been a loyal customer

Hey guys,

Sorry for the lack of announcement from me! I usually get on here and let you all know when we release new parts, but I've been out of the office for a little while... (Just got married. ) Anyways, I'm back! Here's what's new and upcoming from BORLA for the 2016-2017 Camaro...


BORLA 2016-2017 Camaro SS update/news

• Headers:
  
  • Part # 17293 = Long Tube Headers (*Competition Use Only*): https://www.borla.com/products/camar...rt__17293.html
    This header features 1.75" Primaries and 3" collectors. It fits with the 3" cat-back systems listed below or may be adapted to fit with a 2.75" system by using our adapter pipes (Part # 60625).
    
    
  • Part # 60625 = Adapter Pipes: https://www.borla.com/products/camaro_ss_adapters_part__60625.html
    These pipes adapt the 3.0" header collector to a 2.75" mid-pipe.
    

• 3" Cat-Back Exhaust Systems (NPP & Non-NPP):
  Our 3" Cat-Back Exhaust Systems are intended for highly modified vehicles that require a larger diameter exhaust. These systems pair nicely with our Long Tube Headers, but can also be used with other headers.
  
  
  • NPP
    These systems have dual tips and will fit vehicles equipped with Dual Mode Exhaust (NPP), but they do not include Dual Mode valves; they delete the valves. These systems can also be used on vehicles that came from the factory with two tips (Non-NPP), but the rear bumper valance must be changed to accommodate four tips.
    
    • Part # 140687 = NPP 3" Cat-Back (S-Type): https://www.borla.com/products/camar...t__140687.html
      
    • Part # 140688 = NPP 3" Cat-Back (ATAK®): https://www.borla.com/products/camar...t__140688.html
      
      
  • Non-NPP
    • Part # 140689 = Non-NPP 3" Cat-Back (S-Type): https://www.borla.com/products/camar...t__140689.html
      
    • Part # 140690 = Non-NPP 3" Cat-Back (ATAK®): https://www.borla.com/products/camar...t__140690.html
      
      
  • Part # 60626 = Adapter Pipes: https://www.borla.com/products/camar...rt__60626.html
    These adapters are used to delete the cats and adapt our 3" exhaust systems to OE manifolds.
    

Stay Tuned and Check Out: https://www.borla.com/chevy-2016-201...tems/#CamaroV8


BORLA 2016-2017 Camaro V6 update/news

• Axle-Back Exhaust Systems (Non-NPP):
  Our Non-NPP exhaust systems for the 2016-2017 Camaro V6 are making their way through the final stages of our product release process. If you want to be notified when the parts are released, you can fill out the form on our website and you will get an email when the parts you're looking for are available for purchase: https://www.borla.com/chevy-2016-201...ms/#NotifyForm
  
  The BORLA Part #s that will be released are...
  
  • Part # 11928 = Non-NPP Axle-Back (S-Type): not on website yet
  • Part # 11929 = Non-NPP Axle-Back (ATAK®): not on website yet
    
    
• Video
  Our video has been shot and is being edited now. I will post it when it's ready!

Stay Tuned and Check Back: https://www.borla.com/chevy-2016-2017-camaro-exhaust-systems/#CamaroV6



BORLA Exhaust for the 2016-2017 Camaro
https://www.borla.com/chevy-2016-201...haust-systems/

.

[NY Andrew]

Yes finally! Can't wait for V6! Can you actually make a video for it? Because if not I'm not gonna blindly purchase. Thanks.

[Lisa@Borla]

Originally Posted by NY Andrew

Yes finally! Can't wait for V6! Can you actually make a video for it? Because if not I'm not gonna blindly purchase. Thanks.

Yes, we will be releasing a video for the V6. I just updated my previous post to say: "Our video has been shot and is being edited now. I will post it when it's ready!"

[Lisa@Borla]

Here are some still shots from the filming of our Camaro V6 video...







Video Coming Soon! Stay Tuned!

[NY Andrew]

AWESOME!!! CANT'T WAIT!! Thank you!! Also possibly try to capture the sound inside with windows up and then windows down as well as outside of course too please!!

[EDFHOBBIES]

https://youtu.be/RdP-AtrUR9c

Here is the show..