[TrackClub]

Got it and thx! I am sooo tempted...lol!

[WhiteNight]

Originally Posted by Provoste

18x10 et 25 x 4 is my current setup, they work great and fit perfect with a 5mm spacer up front.

If I was buying another set- I'd get 18x10.5 et22 square.

Those would poke out back and the front? 18x10 are flush from what I have seen?

[Provoste]

Originally Posted by WhiteNight

Those would poke out back and the front? 18x10 are flush from what I have seen?

Yep, and yep. Push front and rear 9.3mm further out.

[WhiteNight]

That s not bad. Camber should fix that. You still need a spacer in the front?

[Provoste]

Originally Posted by WhiteNight

That s not bad. Camber should fix that. You still need a spacer in the front?

Yes, same as 18x10 et25, 5mm spacer on front axle.

[WhiteNight]

Ah. Ok. Thanks for your help.

[SPORTBIKES]

I went for the 19s and NT-01s. Put 305s on the rear and this is what I got. Seems like the poke may be too much, especially since the Supercar 3s (20s) had none at the top.

Might be bad offset?

Think I should try these?

[LSmith353]

Here's mine with 19x10, +25 with 285's. I think that poke would be about right with a 305.

Edit: well that didn't work....

[glamcem]

Originally Posted by SPORTBIKES

I went for the 19s and NT-01s. Put 305s on the rear and this is what I got. Seems like the poke may be too much, especially since the Supercar 3s (20s) had none at the top.

Might be bad offset?

Think I should try these?

What is the rear camber? Offsets?

[LSmith353]

In attempt not to exceed my Photobucket limit, pics of mine are in this thread, post #10 I think.
http://www.camaro6.com/forums/showthread.php?t=506885

[SPORTBIKES]

Originally Posted by glamcem

What is the rear camber? Offsets?

Rear is a 19x11
Alignment is stock at this time
Offet - They are said to be 43mm in rear

[LSmith353]

My bad. Based on your other posts, I thought you had bought Apex. Ignore my replies........

[glamcem]

Originally Posted by SPORTBIKES

Rear is a 19x11
Alignment is stock at this time
Offet - They are said to be 43mm in rear

hmm they didn't look like +43mm offset to me, my OEM 1LE wheels looked more flush with the same offset. I have 19x11" with +25mm offset (325 tires) and they don't look too different to me

some pictures of that can be found here, for the reference

http://www.camaro6.com/forums/showpo...&postcount=121

[SPORTBIKES]

Originally Posted by glamcem

hmm they didn't look like +43mm offset to me, my OEM 1LE wheels looked more flush with the same offset. I have 19x11" with +25mm offset (325 tires) and they don't look too different to me

some pictures of that can be found here, for the reference

http://www.camaro6.com/forums/showpo...&postcount=121

How are you doing with the 325? Have you had the on the track? They do look similar to these 305s with this cut I have. My guess is that the wheel has different measurements then the MRRR, but when they cut them, they used the same offset. These were the first time to be fitted to the Camaro.