[drivingagain]

Originally Posted by 2SS_in_GA

They already made 500rwhp on a 6th gen with cam and heads and accompanying mods, but it was a manual trans.

Awesome to hear. I have a manual transmission too. Do you know if it was e85 or on 93?

The valve covers with relocation of the coil packs makes the engine look sexy too! The engines today with plastic covers everywhere just look toyish.

I have seen bolt on's with e85 come close maybe even hit the 500whp mark. Although not really alot of e85 in my area. E85 mainly in major cities of Florida. Your last dyno gets close to that number. Even looking to stay conservative for the FI.

[oldman]

Originally Posted by drivingagain

The valve covers with relocation of the coil packs makes the engine look sexy too!

Word

[Chevy71]

Originally Posted by 2SS_in_GA

The coil brackets are available through Vengeance, but made by Moroso. This particular set was used at the PRI trade show, so the wires, brackets, and valve covers were all a set. Not sure how it prices out. VR usually does a coil pack relocation with the covers, so you'd have to call and ask what the price is with the setup on my car.

Thanks man, very helpful. Looks like an awesome set up, and a great shop.

[aka Reckless]

The coil brackets were made by Moroso. David at Vengeance is looking into the possibility of selling them.

[Chevy71]

Originally Posted by 2SS_in_GA

The coil brackets were made by Moroso. David at Vengeance is looking into the possibility of selling them.

I found them on Moroso's website. I like the fancy valve covers with the packs relocated. It looks awesome man. Did they get stage one done and tuned for you now?

[aka Reckless]

Originally Posted by Chevy71

I found them on Moroso's website. I like the fancy valve covers with the packs relocated. It looks awesome man. Did they get stage one done and tuned for you now?

Yes. Picked up 80rwhp with cam + headers + E85

[Chevy71]

Originally Posted by 2SS_in_GA

Yes. Picked up 80rwhp with cam + headers + E85

Do you have the dyno paper, a video, some sound with your new cam? All the fun stuff for us watching your build lol

[aka Reckless]

Originally Posted by Chevy71

Do you have the dyno paper, a video, some sound with your new cam? All the fun stuff for us watching your build lol

See post #5 in this thread for dyno info.

No sound clips. Maybe I can get something today.

[Chevy71]

Originally Posted by 2SS_in_GA

See post #5 in this thread for dyno info.

No sound clips. Maybe I can get something today.

I'm sorry man, I do remember seeing this now that I looked back at it.

[wnta1ss]

May I ask, what is the compression ratio of those forged pistons, assuming of course stock head gasket thickness and stock combustion chamber volume?

[aka Reckless]

Originally Posted by wnta1ss

May I ask, what is the compression ratio of those forged pistons, assuming of course stock head gasket thickness and stock combustion chamber volume?

No change to CR with these pistons. Just like the stockers so they can be dropped in without a re-balance.

http://vengeanceracing.net/2016-cama...1-pistons.html

[Brains]

Dangit Todd, go back to your old handle, if it wasn't for your name in the sig I'd be like "who the heck is this guy?" lol.

Nice work so far, need to get started on mine.

[WILWAXU]

Originally Posted by Brains

Dangit Todd, go back to your old handle, if it wasn't for your name in the sig I'd be like "who the heck is this guy?" lol.

Nice work so far, need to get started on mine.

Yeah.. no kidding!

[aka Reckless]

Reckless was already taken lol

Maybe they will change it for me to "aka Reckless"