[Val Walkinshaw]

Originally Posted by p47dman

Val, I use a rotary buffer that has a clutch. You cannot burn through the paint. Works very well.

Tell me more. Brand and model number

[SSShark]

Originally Posted by Val Walkinshaw

That seems like an excellent price.

Well, it ended up being $5.1k including oil, fluids, coolant and AC reload.

[Val Walkinshaw]

Just wanted to share in my excitement, besides wet sanding my passenger side I installed a new MAF sensor that I suspected was failing due to higher than normal MAF readings and very negative ST/LT fuel trims. Happy to report the new sensor seems to be showing positive numbers.


https://youtube.com/shorts/cfEh98FzAFM?feature=share

[Val Walkinshaw]

Originally Posted by TRUEOGRE2SS

Finally installed my Griffin Motorsports belly pan that I designed for the AWE Track edition Cat Back exhaust owners, custom powder coated to match Camaro, WOW, what a game changer, really cleaned up that open cavity where the suitcase muffler used to be.


With the style of rear diffuser I have, I had to sandwich pan in between diffuser and diffuser brackets, turned out to be a really clean install


For those of you that have an AWE Track edition Cat-Back exhaust, I highly suggest you go check out
griffin-motorsports.com and get one of these pans for yourself.


I hate it when I load my pictures right, but, then when they finally get uploaded the 2nd pic is upside down

That's so damn beautiful. If I had a dick it would be hard.

[SSShark]

Originally Posted by Val Walkinshaw

That's so damn beautiful. If I had a dick it would be hard.

[Ryanbabz71]

Never have enough cup holders. Decided to 3D print one and see how it goes. Fits my 30oz yeti great. I mounted on the pass side rear seat so its easily accessible from the drivers seat.

[SpartanSS]

Originally Posted by Ryanbabz71

Never have enough cup holders. Decided to 3D print one and see how it goes. Fits my 30oz yeti great. I mounted on the pass side rear seat so its easily accessible from the drivers seat.

That actual look very useful, found something similar on Amazon - hope it holds up

[Ryanbabz71]

Originally Posted by SpartanSS

That actual look very useful, found something similar on Amazon - hope it holds up

I dont see why it wont its pretty solid. Easily accessible too. Might make another for the drivers side would be good for traveling.

[Val Walkinshaw]

Originally Posted by Ryanbabz71

Never have enough cup holders. Decided to 3D print one and see how it goes. Fits my 30oz yeti great. I mounted on the pass side rear seat so its easily accessible from the drivers seat.

That's a pretty slick design. Kudos to you. If you're willing I would take one off your cans and the color of black or gray anything but red. I'd be happy to venmo you a few bucks. That looks pretty useful. Well done

[Ryanbabz71]

Originally Posted by Val Walkinshaw

That's a pretty slick design. Kudos to you. If you're willing I would take one off your cans and the color of black or gray anything but red. I'd be happy to venmo you a few bucks. That looks pretty useful. Well done

I only did red as an accent to the red seatbelts. Send me a message if your are interested.

[SpartanSS]

Car in winter storage, but decided to put on the new pedals since there’s not much else to do…

[AZIROC]

Got alittle vinyl done.

[cdb95z28]

Originally Posted by AZIROC

Got alittle vinyl done.

Nice! But posting that without out a link on the source is an United Nations illegal designated form of torture.

[2SS Capt]

Originally Posted by AZIROC

Got a little vinyl done.

Very cool!!!