ZL1 1LE Question - Trunk Kit Parts on Delivery - Page 4

waterman · 04-22-2019, 03:10 AM

Quote:

Originally Posted by ICTsccaCamaro

Well the 2019 steering rack ducts went on perfect.

Thanks for posting.

Mountain · 04-29-2019, 05:07 PM

Quote:

Originally Posted by rlarsen462

Looking at that I'm not sure what the concern is with water ingress...even with those large shields, in heavy enough rain, turning, driving through light standing water/puddles, etc. everything up there is getting wet anyway?

I don't see a compelling reason you couldn't run those P/S coolers full time if the car is mainly a track and dry/warm weather non-DD?

Also, thanks for the great pictures!

These ducts haven’t been well pictured. First picture is the steering rack/engine side and second is the underbody side. The duct isn’t straight open-back.

waterman · 04-29-2019, 05:08 PM

Quote:

Originally Posted by Mountain

These ducts haven’t been well pictured:

Nice! Thanks.

trz174 · 06-22-2019, 04:04 AM

Quote:

Originally Posted by ICTsccaCamaro

Well the 2019 steering rack ducts went on perfect.

Thanks! Ordered the ducts for my 18 ZL1 after reading these posts and installed them last night. No issues.

Here’s a view of the installed passenger side duct and fender well support.

LT4Greg · 06-22-2019, 12:26 PM

Do any of you folks know how many orange spring spacer blocks are supposed to be with the car? They are used for rollback towing in case of a flat so the ZL1 can be loaded on the tow vehicle without tearing off or damaging the front splitter. My 2017 had only one when I bought it(used) and it shows in the manual supplement 2 pieces and I haven’t found the 2nd one. Guess the first owner took it out of the car or got lost.

rlarsen462 · 06-22-2019, 12:49 PM

Quote:

Originally Posted by LT4Greg

Do any of you folks know how many orange spring spacer blocks are supposed to be with the car? They are used for rollback towing in case of a flat so the ZL1 can be loaded on the tow vehicle without tearing off or damaging the front splitter. My 2017 had only one when I bought it(used) and it shows in the manual supplement 2 pieces and I haven’t found the 2nd one. Guess the first owner took it out of the car or got lost.

1LE's come with exactly zero.

LT4Greg · 06-22-2019, 01:02 PM

Wow I would think the ZL1 1LEs would come with them for sure because of the lower front end and splitter!

19ZL1/1LE · 09-10-2019, 06:01 AM

ZL1 1LE does not get the spring spacer due to the fact front ride height is adjustable. In case of needing to load it on a trailer or rollback, adjust the front end to the highest setting.

White_1LE · 09-03-2025, 10:02 AM

Has anyone put those EPS ducts on and left them on for street duty? If yes, have you had any issues?

cdb95z28 · 09-03-2025, 02:00 PM

Quote:

Originally Posted by White_1LE

Has anyone put those EPS ducts on and left them on for street duty? If yes, have you had any issues?

Yes, on an SS 1LE A10.
No. Street and track driven.

06-22-2019, 12:26 PM	#47
LT4Greg Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016 Location: Georgia Posts: 5,875	Do any of you folks know how many orange spring spacer blocks are supposed to be with the car? They are used for rollback towing in case of a flat so the ZL1 can be loaded on the tow vehicle without tearing off or damaging the front splitter. My 2017 had only one when I bought it(used) and it shows in the manual supplement 2 pieces and I haven’t found the 2nd one. Guess the first owner took it out of the car or got lost. __________________ ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.

06-22-2019, 01:02 PM	#49
LT4Greg Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016 Location: Georgia Posts: 5,875	Wow I would think the ZL1 1LEs would come with them for sure because of the lower front end and splitter! __________________ ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.

09-03-2025, 10:02 AM	#51
White_1LE Drives: 2019 ZL1 1LE Join Date: Jul 2019 Location: Minnesota Posts: 57	Has anyone put those EPS ducts on and left them on for street duty? If yes, have you had any issues? __________________ 2019 ZL1 1LE M6 PDR 2019 2SS 1LE (traded in) 1987 Trans Am GTA 383 24X N2O

09-10-2019, 06:01 AM	#50
19ZL1/1LE Drives: 19 Camaro ZL1/1LE. 69 Camaro SS/RS Join Date: Jul 2019 Location: Lugoff, SC Posts: 17	ZL1 1LE does not get the spring spacer due to the fact front ride height is adjustable. In case of needing to load it on a trailer or rollback, adjust the front end to the highest setting.

User Name		Remember Me?
Password