Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > ZL1 Discussions
Reload this Page PHASE.2 MODS - Progress Thread !!!


Phastek Performance


Post Reply
Page 35 of 52 « First 2531323334 35 3637383945 Last »
 
Thread Tools
Old 08-11-2025, 04:33 PM   #477
KingLT1


 
KingLT1's Avatar
 
Drives: 2016 1SS NFG A8
Join Date: Aug 2017
Location: 46804
Posts: 7,561
The entire site is doing this not just the ZL1 subforum.
__________________

2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel
KingLT1 is offline   Reply With Quote
Old 08-11-2025, 04:55 PM   #478
ZLRob
Super Stock
 
ZLRob's Avatar
 
Drives: Chevrolet Camaro ZL1
Join Date: May 2022
Location: Concordia
Posts: 783
Quote:
Originally Posted by radz28 View Post
I have no idea... I hope it's fixed soon...
Yeah I noticed that too and it's showing there are posts but it's not showing which ones have been updated. Outdated forum junk issues probably.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% lower, Griptec 2.5 upper, NGK HR7 Ruthenium plugs, Nostrum 22+ injectors, XDI Goliath HPFP, Katech dual in tank low side pump, Katech oil pump, LME tensioner, DOD delete, LT1 big fuel cam, Jokerz ported blower, MPI lid, GMS hood extractor bracket, Soler ported 87mm (91mm eff) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, 186* LS3 T-stat, Black Widow Angry Housewife/ Corsa NPP mufflers, Borla X pipe, BMR engine mounts, Banks iDash, Lithium Battery, AEM X- Series, HP Tuners, E85, 16.5 psi
834 HP/ 840 TQ
ZLRob is offline   Reply With Quote
Old 08-11-2025, 05:10 PM   #479
SOCAL.M6.ZLE
Having FUN in the SUN...

 
SOCAL.M6.ZLE's Avatar
 
Drives: 2022 M6 ZL1 1LE
Join Date: Jan 2022
Location: San Diego CA
Posts: 2,056
I agree, very irritating...
SOCAL.M6.ZLE is offline   Reply With Quote
Old 08-12-2025, 08:43 AM   #480
cajunzl1
 
Drives: 2018 ZL1
Join Date: Jun 2020
Location: Louisiana
Posts: 118
Socal, nice chart on the boost.

Did you have any comparison vs. the 2.5 upper pulley? my guess is 10 or 11lbs?
cajunzl1 is offline   Reply With Quote
Old 08-12-2025, 01:03 PM   #481
SOCAL.M6.ZLE
Having FUN in the SUN...

 
SOCAL.M6.ZLE's Avatar
 
Drives: 2022 M6 ZL1 1LE
Join Date: Jan 2022
Location: San Diego CA
Posts: 2,056
Quote:
Originally Posted by cajunzl1 View Post
Socal, nice chart on the boost.

Did you have any comparison vs. the 2.5 upper pulley? my guess is 10 or 11lbs?
Hey buddy, I dont... I put a 2.4" pulley on when the blower was ported the first time around... I would assume a similar step down, as it was up.
SOCAL.M6.ZLE is offline   Reply With Quote
Old 08-12-2025, 01:06 PM   #482
SOCAL.M6.ZLE
Having FUN in the SUN...

 
SOCAL.M6.ZLE's Avatar
 
Drives: 2022 M6 ZL1 1LE
Join Date: Jan 2022
Location: San Diego CA
Posts: 2,056
Quote:
Originally Posted by cajunzl1 View Post
Socal, nice chart on the boost.

Did you have any comparison vs. the 2.5 upper pulley? my guess is 10 or 11lbs?
I will also update the chart once finished with tuning, and I can do some more pulls from 2,500 to redline with the new set up... currently only doing street pulls in 3rd gear going up grades in order to keep the top speed low. I'll do a top of 4th pull soon when I can find the right road / time...
SOCAL.M6.ZLE is offline   Reply With Quote
Old 08-12-2025, 01:07 PM   #483
cajunzl1
 
Drives: 2018 ZL1
Join Date: Jun 2020
Location: Louisiana
Posts: 118
Thanks

and thanks for everything you do for this forum!!
cajunzl1 is offline   Reply With Quote
Old 08-12-2025, 01:32 PM   #484
RobZL1
fo'shizZL1
 
RobZL1's Avatar
 
Drives: 2017 ZL1
Join Date: Aug 2017
Location: ATL
Posts: 1,805
Quote:
Originally Posted by SOCAL.M6.ZLE View Post
I will also update the chart once finished with tuning, and I can do some more pulls from 2,500 to redline with the new set up... currently only doing street pulls in 3rd gear going up grades in order to keep the top speed low. I'll do a top of 4th pull soon when I can find the right road / time...
That's the way I do my tuning for the exact same reason. Up a hill in 3rd gear to get it right, then verify on a 4th gear pull in a controlled environment.
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // BMR MM // BC Forged KL13

Mods being installed-
oil pump, cam, ported heads, dual in-tank, Goliath and XDI, corn, etc., etc.
RobZL1 is offline   Reply With Quote
Old 08-12-2025, 01:41 PM   #485
2023_ZL1-AUTO

 
2023_ZL1-AUTO's Avatar
 
Drives: 2023 ZL1 - All Bolt On's
Join Date: Dec 2022
Location: Columbus, Ohio
Posts: 1,188
Quote:
Originally Posted by cajunzl1 View Post
Thanks

and thanks for everything you do for this forum!!
Second that !
__________________
2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi | 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11
2023_ZL1-AUTO is offline   Reply With Quote
Old 08-12-2025, 02:27 PM   #486
SOCAL.M6.ZLE
Having FUN in the SUN...

 
SOCAL.M6.ZLE's Avatar
 
Drives: 2022 M6 ZL1 1LE
Join Date: Jan 2022
Location: San Diego CA
Posts: 2,056
Quote:
Originally Posted by cajunzl1 View Post
Thanks

and thanks for everything you do for this forum!!
You are very welcome! Just doing the little I can to keep up with the heavy hitters on here
SOCAL.M6.ZLE is offline   Reply With Quote
Old 08-12-2025, 02:43 PM   #487
SOCAL.M6.ZLE
Having FUN in the SUN...

 
SOCAL.M6.ZLE's Avatar
 
Drives: 2022 M6 ZL1 1LE
Join Date: Jan 2022
Location: San Diego CA
Posts: 2,056
Quote:
Originally Posted by RobZL1 View Post
That's the way I do my tuning for the exact same reason. Up a hill in 3rd gear to get it right, then verify on a 4th gear pull in a controlled environment.
Great minds think alike
SOCAL.M6.ZLE is offline   Reply With Quote
Old 08-12-2025, 06:58 PM   #488
ZLRob
Super Stock
 
ZLRob's Avatar
 
Drives: Chevrolet Camaro ZL1
Join Date: May 2022
Location: Concordia
Posts: 783
Quote:
Originally Posted by RobZL1 View Post
That's the way I do my tuning for the exact same reason. Up a hill in 3rd gear to get it right, then verify on a 4th gear pull in a controlled environment.
Quote:
Originally Posted by SOCAL.M6.ZLE View Post
Great minds think alike
I think I've always done my pulls the same way. Up and incline, locked in 4th (automatic), from 40-100. Lately just to ensure fuel pressure integrity all the way through under an extended load I have been doing pulls from 25-100 in 4th under WOT up an incline. That has shown me any and all prevalent issues that may be hiding either in fueling, timing or anything else that I might be blanking out on right now.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% lower, Griptec 2.5 upper, NGK HR7 Ruthenium plugs, Nostrum 22+ injectors, XDI Goliath HPFP, Katech dual in tank low side pump, Katech oil pump, LME tensioner, DOD delete, LT1 big fuel cam, Jokerz ported blower, MPI lid, GMS hood extractor bracket, Soler ported 87mm (91mm eff) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, 186* LS3 T-stat, Black Widow Angry Housewife/ Corsa NPP mufflers, Borla X pipe, BMR engine mounts, Banks iDash, Lithium Battery, AEM X- Series, HP Tuners, E85, 16.5 psi
834 HP/ 840 TQ
ZLRob is offline   Reply With Quote
Old 08-13-2025, 12:04 AM   #489
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crazy Coast
Posts: 15,789
I drag on the brakes for lower speed pulls, lol
__________________

'20 ZL1 Black "Fury"
A10, PDR, Exposed CF Extractor
Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs
radz28 is offline   Reply With Quote
Old 08-13-2025, 07:29 AM   #490
clg82
Banned
 
Drives: 2020 Camaro ZL1
Join Date: Oct 2020
Location: Texas
Posts: 1,724
Quote:
Originally Posted by radz28 View Post
I drag on the brakes for lower speed pulls, lol
Are you on stock exhaust Radz, SoCal? Off topic I know lol.
clg82 is offline   Reply With Quote
 
Post Reply
Page 35 of 52 « First 2531323334 35 3637383945 Last »

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:49 AM.

Contact Us - CAMARO6 - Privacy Statement - Terms of Service / DMCA Policy - Top

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.