What did you do to your 6th Gen Camaro today?! - Page 1191

The Maverick · 07-20-2025, 09:50 AM

Quote:

Originally Posted by tortilla-flats

IYKYK

I haven't received a JC Whitney box in ages - but the catalog was great reading back in the day!

tortilla-flats · 07-20-2025, 10:51 AM

Quote:

Originally Posted by The Maverick

I haven't received a JC Whitney box in ages - but the catalog was great reading back in the day!

I had no idea they were still around, lol.

(box has a side mirror assy in it)

GroundhogSS · 07-20-2025, 04:43 PM

Two of the originals were JCWhitney and Honest Charlie. It's been a while.

sklippi2018 · 07-20-2025, 06:00 PM

Took a drive out to AdvAuto to p/u supplies I needed to change both the oil and diff fluid. Added ZL1Addons lift points 7/21.

HankVA · 07-22-2025, 09:33 AM

Quote:

Originally Posted by sklippi2018

Took a drive out to AdvAuto to p/u supplies I needed to change both the oil and diff fluid. Added ZL1Addons lift points 7/21.

She's a beauty.

sklippi2018 · 07-22-2025, 11:43 AM

Quote:

Originally Posted by HankVA

She's a beauty.

Thanks!

Ryanbabz71 · 07-23-2025, 07:55 PM

Took off my underhood extractor piece to install the GMS bracket for additional cooling

Sent from my iPhone using Tapatalk Pro

nothing_but_troub1le · 07-24-2025, 06:19 AM

I got my secondary cats deleted, that paired with the existing MBRP made for a great sound.

tortilla-flats · 07-24-2025, 05:36 PM

Highlights...
ARH (coated) Headers; Katech 103MM TB; JLT v2CAI; ATI SFI UDP.
MSD 2-Step; BMR driveshaft loop.
480/480 on the dyno
In the words of the great JJ Walker..."Dyn-O-Mite!"

7speed · 07-24-2025, 05:42 PM

Quote:

Originally Posted by tortilla-flats

Highlights...
ARH (coated) Headers; Katech 103MM TB; JLT v2CAI; ATI SFI UDP.
MSD 2-Step; BMR driveshaft loop.
480/480 on the dyno
In the words of the great JJ Walker..."Dyn-O-Mite!"

Welcome to the JLT club

texSSin · 07-24-2025, 05:56 PM

Quote:

Originally Posted by tortilla-flats

Highlights...
ARH (coated) Headers; Katech 103MM TB; JLT v2CAI; ATI SFI UDP.
MSD 2-Step; BMR driveshaft loop.
480/480 on the dyno
In the words of the great JJ Walker..."Dyn-O-Mite!"

Very nice 👍

SSShark · 07-24-2025, 06:10 PM

Quote:

Originally Posted by tortilla-flats

Highlights...
ARH (coated) Headers; Katech 103MM TB; JLT v2CAI; ATI SFI UDP.
MSD 2-Step; BMR driveshaft loop.
480/480 on the dyno
In the words of the great JJ Walker..."Dyn-O-Mite!"

Now you just need some corn

The Maverick · 07-24-2025, 09:10 PM

My last commute day that will end at under 20K miles...

Name: IMG_20250724_171841~3.jpg
Views: 181
Size: 67.7 KB

Although I may not be able to snap a photo at the magic moment, rest assured that when 20,000 rolls over, I will be doing 20 mph in second gear, water and oil both at 200 degrees, giving a two-finger V-for-victory salute -- all while driving up on two wheels (most likely the driver's side, but TBD).

arpad_m · 07-24-2025, 09:32 PM

Quote:

Originally Posted by The Maverick

My last commute day that will end at under 20K miles...

Attachment 1166587

Although I may not be able to snap a photo at the magic moment, rest assured that when 20,000 rolls over, I will be doing 20 mph in second gear, water and oil both at 200 degrees, giving a two-finger V-for-victory salute -- all while driving up on two wheels (most likely the driver's side, but TBD).

You rock, Sir

(...don't forget to rev to exactly 2,000 rpm)

07-20-2025, 04:43 PM	#16663
GroundhogSS Drives: '17 2SS convertible'20 Yukon Denali Join Date: Nov 2011 Location: Cedar Park, Texas Posts: 3,022	Two of the originals were JCWhitney and Honest Charlie. It's been a while. __________________ Richard 2017 2SS SIM convertible, A8, NPP, MRC, 56R wheels, GM CAI, Diode Dynamics Side Markers, Mamo Throttle Body Delivered: 08/15/2016 #TeamBeckyD

07-20-2025, 06:00 PM	#16664
sklippi2018 Drives: 2021 ZL1 A10 Join Date: Apr 2019 Location: Virginia Posts: 415	Took a drive out to AdvAuto to p/u supplies I needed to change both the oil and diff fluid. Added ZL1Addons lift points 7/21. Attached Images Last edited by sklippi2018; 07-21-2025 at 08:19 PM. Reason: 2'fer

07-23-2025, 07:55 PM	#16667
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,369 View My Garage	Took off my underhood extractor piece to install the GMS bracket for additional cooling Sent from my iPhone using Tapatalk Pro __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

07-24-2025, 06:19 AM	#16668
nothing_but_troub1le Drives: 2023 1SS 1LE 6M Join Date: Nov 2024 Location: Texas Posts: 72	I got my secondary cats deleted, that paired with the existing MBRP made for a great sound. __________________ "Good cars get you from point A to B, great cars get you in trouble"

07-24-2025, 05:36 PM	#16669
tortilla-flats Drives: 2023 Camaro 2SS Join Date: Nov 2024 Location: DFW, TX Posts: 323 View My Garage	Highlights... ARH (coated) Headers; Katech 103MM TB; JLT v2CAI; ATI SFI UDP. MSD 2-Step; BMR driveshaft loop. 480/480 on the dyno In the words of the great JJ Walker..."Dyn-O-Mite!" Attached Images __________________ Camaro SS - (almost) FBO/E85: Tuned by Snackbar Tuning/21st Century Muscle Cars

07-24-2025, 09:10 PM	#16673
The Maverick Somewhere in the Kalahari Drives: 2021/18 (de-fresh) 3LT RS Join Date: Dec 2017 Location: California Posts: 820	My last commute day that will end at under 20K miles... Although I may not be able to snap a photo at the magic moment, rest assured that when 20,000 rolls over, I will be doing 20 mph in second gear, water and oil both at 200 degrees, giving a two-finger V-for-victory salute -- all while driving up on two wheels (most likely the driver's side, but TBD).

User Name		Remember Me?
Password