What did you do to your 6th Gen Camaro today?! - Page 1188

Green82 · 07-12-2025, 12:40 PM

Quote:

Originally Posted by Smokin19

Finished the Carbonaddons inside. The red is stunning when the sun hits it. I like that all the interior running lights do not get covered anywhere.

Hey, I'm retired and just going to spend some retirement on my grandsons and the Camaro. Did I mention this is the best car I have ever owned.

looks good i did the same to mine a few months back want a few more pieces goal is to get rid of all the chrome

Smokin19 · 07-12-2025, 06:19 PM

"a few more pieces goal is to get rid of all the chrome.

The shiny silver strip around the gauge cluster would get me in the eye at just the right sun. These interiors could have been better, more upgraded.

SPLATT · 07-13-2025, 01:41 AM

Painted the injector covers in the same color as the car. I want to paint the intake cover as well.

SOCAL.M6.ZLE · 07-13-2025, 10:57 AM

Happy Sunday Everyone, Finally got the AWE version of my Belly Pan back from the powder coater... installed the laser cut rubber and foam gaskets and installed for an OEM look!

Currently, only the AWE version is in stock... but Corsa, Borla Atak, and Stainless Works should be following in a few weeks...

Whats great, is that you dont even need to raise the car to install!

BSV-CamaroSS · 07-13-2025, 12:16 PM

Quote:

Originally Posted by SOCAL.M6.ZLE

Happy Sunday Everyone, Finally got the AWE version of my Belly Pan back from the powder coater... installed the laser cut rubber and foam gaskets and installed for an OEM look!

Currently, only the AWE version is in stock... but Corsa, Borla Atak, and Stainless Works should be following in a few weeks...

Whats great, is that you dont even need to raise the car to install!

I like it! As soon as you get the Corsa I will be ordering one.

SSShark · 07-13-2025, 12:26 PM

Quote:

Originally Posted by SPLATT

Painted the injector covers in the same color as the car. I want to paint the intake cover as well.

Nice job preserving the red letters

arpad_m · 07-13-2025, 04:19 PM

Quote:

Originally Posted by SOCAL.M6.ZLE

Happy Sunday Everyone, Finally got the AWE version of my Belly Pan back from the powder coater... installed the laser cut rubber and foam gaskets and installed for an OEM look!

Currently, only the AWE version is in stock... but Corsa, Borla Atak, and Stainless Works should be following in a few weeks...

Whats great, is that you dont even need to raise the car to install!

Happy Sunday

Quick question, does this fit the SS NPP rear diffuser as well, or only the ZL1? They might be the same, just asking in case you happened to already test both. Thank you very much.

SOCAL.M6.ZLE · 07-13-2025, 06:08 PM

Quote:

Originally Posted by arpad_m

Happy Sunday

Quick question, does this fit the SS NPP rear diffuser as well, or only the ZL1? They might be the same, just asking in case you happened to already test both. Thank you very much.

Hey Buddy thats a good question, I am not 100% sure they are the same, and have not found an SS to test on yet to confirm... which muffler system do you use?

*Joshinator99* · 07-13-2025, 06:14 PM

Quote:

Originally Posted by SOCAL.M6.ZLE

Hey Buddy thats a good question, I am not 100% sure they are the same, and have not found an SS to test on yet to confirm... which muffler system do you use?

My GMS plate should be here in a couple of days and I have an SS, so I’ll fit mine up and report back. I’ve got the AWE Touring catback but am running an aftermarket rear diffuser since I wanted to run quad tips. As usual I’m probably no help.

SPLATT · 07-13-2025, 06:18 PM

Quote:

Originally Posted by SSShark

Nice job preserving the red letters

I had to repaint them. The original red was gone when I bought the car.

SSShark · 07-13-2025, 06:38 PM

Quote:

Originally Posted by SPLATT

I had to repaint them. The original red was gone when I bought the car.

Looks great, nice and clean!

beowulf556 · 07-13-2025, 07:52 PM

OMG, two months later, my new exhaust arrived. Finally. Nearly forgot I even ordered it! I love these black tips and love that they are 1/2" larger than the stock ones. Going to get it on the lift this week and complete my stainless works system. Can't wait!

MT-SS1LE · 07-13-2025, 08:35 PM

Quote:

Originally Posted by SOCAL.M6.ZLE

Happy Sunday Everyone, Finally got the AWE version of my Belly Pan back from the powder coater... installed the laser cut rubber and foam gaskets and installed for an OEM look!

Currently, only the AWE version is in stock... but Corsa, Borla Atak, and Stainless Works should be following in a few weeks...

Whats great, is that you dont even need to raise the car to install!

Hey, will this work on my SS 1LE? I have a Borla Atak axleback.

arpad_m · 07-13-2025, 09:04 PM

Quote:

Originally Posted by SOCAL.M6.ZLE

Hey Buddy thats a good question, I am not 100% sure they are the same, and have not found an SS to test on yet to confirm... which muffler system do you use?

I'm still rocking the OEM NPP suitcase, but now with your beautiful solution to the parachute cavity (if it fits the SS), I'm willing to consider any NPP-compatible valved exhaust that you support.

Quote:

Originally Posted by Joshinator99

My GMS plate should be here in a couple of days and I have an SS, so I’ll fit mine up and report back. I’ve got the AWE Touring catback but am running an aftermarket rear diffuser since I wanted to run quad tips. As usual I’m probably no help.

Thanks, Josh, it may actually help even more, since I'm running an aftermarket diffuser as well

Its attachment points look exactly the same as OEM, though, hopefully yours will match as well.

07-12-2025, 06:19 PM	#16620
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,700	"a few more pieces goal is to get rid of all the chrome. The shiny silver strip around the gauge cluster would get me in the eye at just the right sun. These interiors could have been better, more upgraded. __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/Gesi cats, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

07-13-2025, 01:41 AM	#16621
SPLATT Drives: 16 Camaro 2SS Join Date: Jan 2025 Location: Deep in the woods of Washington Posts: 57	Painted the injector covers in the same color as the car. I want to paint the intake cover as well. Attached Images

07-13-2025, 10:57 AM	#16622
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	Happy Sunday Everyone, Finally got the AWE version of my Belly Pan back from the powder coater... installed the laser cut rubber and foam gaskets and installed for an OEM look! Currently, only the AWE version is in stock... but Corsa, Borla Atak, and Stainless Works should be following in a few weeks... Whats great, is that you dont even need to raise the car to install! Attached Images __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

07-13-2025, 07:52 PM	#16630
beowulf556 Drives: Camaro SS 1LE M6 Join Date: Feb 2024 Location: Las Vegas Posts: 353	OMG, two months later, my new exhaust arrived. Finally. Nearly forgot I even ordered it! I love these black tips and love that they are 1/2" larger than the stock ones. Going to get it on the lift this week and complete my stainless works system. Can't wait! Attached Images __________________ 2018 Camaro SS 1LE M6 Stainless Works Headers & X pipe \| Redline Axleback \| E85 \| Rotofab \| Soler Ported TB \| LT2 Manifold

User Name		Remember Me?
Password