[WyreTheWolf]

Originally Posted by 2SS Capt

I'm very partial to the SS 1LE wheel style but those are some great aftermarket wheels, what are they? What size(s) did you go with? I love the color of them...

Manufacturer: VMR
Site: https://vmrwheels.com/
Model: V710
Color: Gunmetal
Size:
• Front: 20x9+25 | 245/40ZR20
• Rear: 20x10+35 | 275/35ZR20

Tires: Continental ExtremeContact DWS06 Plus

[vaeron]

Originally Posted by Green82

make sure to use the foam blocks in the center or you will hear louvers vibrating down the highway

Yep, already on and worked great on the highway... the fitment is... tight... but works.

went for a road trip today and took some more photos. Was itching to go for a drive!

[Booher]

I've been running the same louvers since 2018, there are some things to do to it, like running foam tape around the perimeter, adding an extra plate in center bottom, but I've never heard of using foam blocks in the center. BTW, love the louvers man!

[speedyink1]

Went for a short road trip to Tofino with my Brother. Damn these cars handle well, what a fun drive!

[Green82]

Originally Posted by Booher

I've been running the same louvers since 2018, there are some things to do to it, like running foam tape around the perimeter, adding an extra plate in center bottom, but I've never heard of using foam blocks in the center. BTW, love the louvers man!

the foam blocks come with the the louvers install kit. the go in the centers of the louvers where they flex

[Booher]

Interesting, they must've revised it, I've never had any issues. /shrug my bad

[The Maverick]

Originally Posted by Ryanbabz71

Yes that version sticks onto the current piece. This one replaced the stock triangle piece and can be swapped back easily.

Left modified version
Right stock piece



Sent from my iPhone using Tapatalk Pro

I have been unable to get into the Facebook group where these were offered. Is there any other contact info available for the seller?

[vaeron]

Originally Posted by Booher

I've been running the same louvers since 2018, there are some things to do to it, like running foam tape around the perimeter, adding an extra plate in center bottom, but I've never heard of using foam blocks in the center. BTW, love the louvers man!

Thanks so much! I had to remove them today to check adhesive and was going to wash the car and found 3 of the pads hadn't adhered well, I'm sourcing new adhesive and will reinstall them either in the next couple days or after my trip. Not sure I'll have time to work on it before I go.

[clg82]

Originally Posted by vaeron

I'm sourcing new adhesive.

Sourcing? You looking for aircraft grade material? Just go to your local VatoZone...

[sklippi2018]

Originally Posted by The Maverick

I have been unable to get into the Facebook group where these were offered. Is there any other contact info available for the seller?

In case there are others I first saw them under this FB Group: 6th Gen ZL1 Camaro

[DeuceCam]

Originally Posted by sklippi2018

Found this the other day...

That was a good watch. Thanks for posting

[Ryanbabz71]

Originally Posted by The Maverick

I have been unable to get into the Facebook group where these were offered. Is there any other contact info available for the seller?

Not sure, his FB user name is Meeko-And Kyle

[SPLATT]

New wheels and tires. American Racing TTF in 20x11 and 20x9.5 with 285/30R20 and 305/30R20 Continentals. Wasn't quite what I wanted but close. I also installed the rock guards. Never mind the dirt, I live a few miles down a gravel road and haven't washed this week.

[Booher]

Try gorilla glue double sided permanent tape for the stud plates or whatever they're called, thats what I used, and don't worry, it will come off when you need it. I heard 3m works too, I suggest not using the tape it comes with.