Mode Button/Traction Control - Page 5

Annihilate · 04-09-2025, 12:16 PM

Quote:

Originally Posted by Curr

When it gets here, I'll post some up.

Thank you!

Quote:

Originally Posted by FollowMyLine

Sold out AGAIN! May need to make another batch.

I checked out your website, and I never noticed that the LED around the headlight looked like a frying pan. Now I can't unsee it, but I still like it lol.

DamonZ28 · 04-09-2025, 01:25 PM

Quote:

Originally Posted by Annihilate

4 Pages and no one has any pictures of this thing installed!

Potentially interested, wanna see some pics people!

You saw the pics on the website?

Annihilate · 04-09-2025, 01:34 PM

Quote:

Originally Posted by DamonZ28

You saw the pics on the website?

Yeah, I want a far shot, like the entire console, ya know? Angles!

arpad_m · 04-09-2025, 01:57 PM

I think this part could benefit from a carbon fiber cover. (I know, cover on a cover, but still, this looks raw 3D printed, not exactly an improvement to an already less than snazzy interior.)

Curr · 04-10-2025, 07:15 AM

Quote:

Originally Posted by arpad_m

I think this part could benefit from a carbon fiber cover. (I know, cover on a cover, but still, this looks raw 3D printed, not exactly an improvement to an already less than snazzy interior.)

Another reason I ordered 2.

I might try and hit with some 2000 grit or something. We'll see, also need to talk to mech eng at work to see what my options would be.

Blackrat · 04-12-2025, 03:55 PM

Quote:

Originally Posted by Annihilate

Yeah, I want a far shot, like the entire console, ya know? Angles!

https://i.imgur.com/TlSR4zH.jpeg

https://i.imgur.com/Obj12jk.jpeg

https://i.imgur.com/rYdBkxG.jpeg

Name: Capture.JPG
Views: 232
Size: 137.6 KB

Let me know if this works for you. It looks good imo. It is a 3d printed hinge so it prefers to lay flat as opposed to flopping around and staying up but it moves freely, and I have no problems lifting it with the back of my finger as I go to change modes. I prefer it to want to stay flat as opposed to it potentially lifting and my arm or coat catching on it and popping it off.

One thing I almost screwed up on when putting it on is that the double sided tape portion is supposed to go on the inside downward slope of the ring leading down to the boot. The top flat portion does not give enough material to stick onto and it would also cover up part of the ebrake cubby. I thought this was a design flaw at first until I could checked the website and saw it was supposed to sit further forward. Simple, but someone in a hurry might miss that.

Deacon Blues · 04-12-2025, 09:01 PM

Thanks for the detailed photos and install guide. I'll install mine as soon as she comes out of winter storage.

Curr · 04-15-2025, 06:30 AM

As previously mentioned here are some pics in my ZL1.

I would suggest, as anytime you use 3M VHB tape, that you get some adhesion promoter (Amazon Link); and clean the area of attachment first with some IPA wipes, then apply the adhesion promoter, then the VHB tape after 30s or so...

Overall thoughts: Worth the money. Looks fine. Lays flat, which was a worry. Kind of worried about the hinges, but this thing might get opened / closed 1x a week? So <shrug> not really going to fret over it.

Good job on filling a very small niche for us owners, and not charging an arm and a leg. I'll definitely look at your store every now and then. Kudos.

HankVA · 04-15-2025, 03:51 PM

Quote:

Originally Posted by FollowMyLine

Sold out AGAIN! May need to make another batch.

Just got mine. Nice product, and I appreciate the felt backing so it won't rattle or scratch anything. Nicely done.

FollowMyLine · 04-20-2025, 07:50 PM

Thanks for the additional pics everyone! Here are some I have taken or others have sent me:

FollowMyLine · 04-20-2025, 07:53 PM

We are currently sold out (again) but we are working to get more in production based on demand.

FollowMyLine · 04-20-2025, 07:56 PM

Quote:

Originally Posted by Curr

As previously mentioned here are some pics in my ZL1.

I would suggest, as anytime you use 3M VHB tape, that you get some adhesion promoter (Amazon Link); and clean the area of attachment first with some IPA wipes, then apply the adhesion promoter, then the VHB tape after 30s or so...

Overall thoughts: Worth the money. Looks fine. Lays flat, which was a worry. Kind of worried about the hinges, but this thing might get opened / closed 1x a week? So <shrug> not really going to fret over it.

Good job on filling a very small niche for us owners, and not charging an arm and a leg. I'll definitely look at your store every now and then. Kudos.

Thanks for the pics! The hinge we are using is stainless steel, so there shouldn’t be any issues, even in more humid environments.

SS_Don · 04-20-2025, 07:59 PM

Quote:

Originally Posted by FollowMyLine

We are currently sold out (again) but we are working to get more in production based on demand.

I haven't installed my yet, other life things got in the way, but I have one suggestion. Maybe, if possible, add a spring so it closes automatically after you make your change.

Deacon Blues · 04-20-2025, 08:45 PM

Without making it look gaudy, I was thinking of adding either a bowtie or SS badge on the cover, but most I'm seeing online are too large for the task. Just trying to think of something to make it look a little less generic.

04-09-2025, 01:57 PM	#60
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 13,150 View My Garage	I think this part could benefit from a carbon fiber cover. (I know, cover on a cover, but still, this looks raw 3D printed, not exactly an improvement to an already less than snazzy interior.) __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

04-15-2025, 06:30 AM	#64
Curr Probably doesn't like you Drives: 2022 WCT ZL1 M6 Join Date: Jun 2015 Location: Boston-ish Posts: 1,382	As previously mentioned here are some pics in my ZL1. I would suggest, as anytime you use 3M VHB tape, that you get some adhesion promoter (Amazon Link); and clean the area of attachment first with some IPA wipes, then apply the adhesion promoter, then the VHB tape after 30s or so... Overall thoughts: Worth the money. Looks fine. Lays flat, which was a worry. Kind of worried about the hinges, but this thing might get opened / closed 1x a week? So <shrug> not really going to fret over it. Good job on filling a very small niche for us owners, and not charging an arm and a leg. I'll definitely look at your store every now and then. Kudos. __________________ I hope the 6th gen Camaro has a melodious horn trumpet. I'll tootel it at the ladies, yelling out "Hi hi." - RenegadeXR كافر ΜΟΛΩΝ ΛΑΒΕ железобетонное очко Quod gratis asseritur, gratis negatur. There is an unequal amount of good and bad in most things, the trick is to work out the ratio and act accordingly.

04-20-2025, 07:50 PM	#66
FollowMyLine Driver for Hire Drives: 22 Camaro 2SS 1LE M6 Join Date: Jul 2017 Location: Minnesota Posts: 787 View My Garage	Thanks for the additional pics everyone! Here are some I have taken or others have sent me: Attached Images __________________ Luan Zeqollari 2022 Camaro 2SS 1LE M6 - Wild Cherry Tintcoat 2018 Camaro 1SS 1LE - Hyper Blue Metallic - RIP 6/6/20 YouTube Channel

04-20-2025, 07:53 PM	#67
FollowMyLine Driver for Hire Drives: 22 Camaro 2SS 1LE M6 Join Date: Jul 2017 Location: Minnesota Posts: 787 View My Garage	We are currently sold out (again) but we are working to get more in production based on demand. __________________ Luan Zeqollari 2022 Camaro 2SS 1LE M6 - Wild Cherry Tintcoat 2018 Camaro 1SS 1LE - Hyper Blue Metallic - RIP 6/6/20 YouTube Channel

04-12-2025, 09:01 PM	#63
Deacon Blues Drives: 2024 Camaro 1SS M6 Join Date: Nov 2023 Location: Western NY Posts: 242	Thanks for the detailed photos and install guide. I'll install mine as soon as she comes out of winter storage.

04-20-2025, 08:45 PM	#70
Deacon Blues Drives: 2024 Camaro 1SS M6 Join Date: Nov 2023 Location: Western NY Posts: 242	Without making it look gaudy, I was thinking of adding either a bowtie or SS badge on the cover, but most I'm seeing online are too large for the task. Just trying to think of something to make it look a little less generic.

User Name		Remember Me?
Password