[gdgraph]

Not sure what the best way to secure it to the center console is, but maybe if you put a couple of dots of hot glue down (on the black part of the plastic only), you should be able to peel the hot glue off when you want to remove it.

You wouldn't be able to change the modes or use the ebrake, but maybe if you cut slits where the black marks are you'd be able to flip it up and use the buttons (assuming your dog's paws aren't small enough to push down on the hinge, and then just tack down the case to the console with hot glue where the white dots are. May also need to notch out the spots where the side of the case comes into contact with the raised portions of the silver plastic on the car so it can sit flat and flush for the hot glue to stick to the case. I don't think the hot glue gets hot enough to deform any of that black plastic, and when you want to remove it you can just peel it up.

[2018 Blue 1LE]

Anyone ever come up with something?


I was thinking about looking into the wiring and maybe adding an on/off switch inline to disable each switch individually.

[Deacon Blues]

I thought it was on here, but maybe it was on the Camaro subreddit, but someone designed and 3d printed a cover for the TC/mode switch that flipped up as needed...

[cdb95z28]

https://followmyline-shop.fourthwall...cUrfZMYud6wyQA

[2018 Blue 1LE]

Thanks.

[roostere4]

Thanks for the link to that. My only question is has anyone used this in area where it gets hot in the summer? Wondering how it has held up.

According to Google. Theoretically a car in even in 80 degree Fahrenheit weather could approach 172 degrees Fahrenheit on the interior. Which is at 77 degrees Celsius seems to be at the higher end of the range where PLA which this is made out of will deform

[calypso50kid]

Originally Posted by cdb95z28

https://followmyline-shop.fourthwall...cUrfZMYud6wyQA

sucks they are out of stock at the moment

[SS_Don]

Originally Posted by calypso50kid

sucks they are out of stock at the moment

It says they are made to order.

NOTE: All Sales Are Final. This is made to order, and cannot be returned once your order has been placed.

[Deacon Blues]

Originally Posted by cdb95z28

https://followmyline-shop.fourthwall...cUrfZMYud6wyQA

That's the one, thanks!

[Blackrat]

Originally Posted by SS_Don

It says they are made to order.

NOTE: All Sales Are Final. This is made to order, and cannot be returned once your order has been placed.

I sent an email to them for clarification. There's no way to order the cover on the page. I tend to hit the buttons often if I'm wearing a coat.

[SS_Don]

Originally Posted by Blackrat

I sent an email to them for clarification. There's no way to order the cover on the page. I tend to hit the buttons often if I'm wearing a coat.

Let us know what you find out. Might be interested in one also.

[Deacon Blues]

I'd definitely be in for one as well. I didn't think it would be a problem but I do tend to bump those buttons more often than I'd expect.

[2018 Blue 1LE]

Originally Posted by Deacon Blues

I'd definitely be in for one as well. I didn't think it would be a problem but I do tend to bump those buttons more often than I'd expect.

[Blackrat]

Originally Posted by SS_Don

Let us know what you find out. Might be interested in one also.

Very quick response from them.

They are just out of stock. More are in production, and we should have more stock early to mid next week.

Thanks!