[ZPirate]

Originally Posted by Gen6cyl

Does the zle have a solid mount rear cradle? You decided against that?

Yes, the ZLE has solid bushings. The BMR kit is easier to install than the ZLE bushings are. And it fits into the oem bushings. Supposedly the BMR kit also isn't quite as stiff as the ZLE bushings are.

[sactownbwoy]

Originally Posted by arpad_m

Your car is an absolute beauty, the livery design is spot on and everything about it is tastefully done, I wonder how those other two could beat it... what makes and models were they?

They were the typical show cars, way over the top. Not quite my taste. But on a good note, I took home best interior at a show this Saturday. This was a complete surprise to me. My interior is subtle, but the judges liked it.

[shippingguy]

Took off my Roto-Fab CAI and installed the Carbon Elite Series. Great quality and so easy to install. I could not stand the screeching sound the Roto-Fab made. They had no solution for it so I just took it off. They said multiple people have complained about the same thing.

[SSShark]

Originally Posted by shippingguy

Took off my Roto-Fab CAI and installed the Carbon Elite Series. Great quality and so easy to install. I could not stand the screeching sound the Roto-Fab made. They had no solution for it so I just took it off. They said multiple people have complained about the same thing.

Very nice looking engine compartment shipping guy. It's funny that you've mentioned a screeching sound from your Rotofab. I just recently had my car tuned and I also have a Rotofab. Now while accelerating, I'm hearing some swooshie fluttering sounds from that area. I'm wondering if it's coming from the Rotofab?

[shippingguy]

Originally Posted by SSShark

Very nice looking engine compartment shipping guy. It's funny that you've mentioned a screeching sound from your Rotofab. I just recently had my car tuned and I also have a Rotofab. Now while accelerating, I'm hearing some swooshie fluttering sounds from that area. I'm wondering if it's coming from the Rotofab?

Thank you I like it! It’s pricey but workmanship is top quality and ease of install is so simple. Plus it is so lightweight. The filter is the heaviest part. Yeah the swoosh is just the intake sucking air, but on freeway cruising in 6th gear(M6 car) at low RPM step on it and it makes like a metal screech sound. There has been some videos of others with same issue.

[SSShark]

Originally Posted by shippingguy

Thank you I like it! It’s pricey but workmanship is top quality and ease of install is so simple. Plus it is so lightweight. The filter is the heaviest part. Yeah the swoosh is just the intake sucking air, but on freeway cruising in 6th gear(M6 car) at low RPM step on it and it makes like a metal screech sound. There has been some videos of others with same issue.

Yes, definitely well made and very sturdy! The metal screech sound that you describe is spot on. I have to go see my tuner in a few weeks so that he can install my kooks connection back x-pipe and my Borla S-Type axle back. I will bring that up to him to see if I can switch over to the cold air inductions intake and do everything in one shot, including the re-tune.

[Hostile_1LE]

Originally Posted by SSShark

Yes, definitely well made and very sturdy! The metal screech sound that you describe is spot on. I have to go see my tuner in a few weeks so that he can install my kooks connection back x-pipe and my Borla S-Type axle back. I will bring that up to him to see if I can switch over to the cold air inductions intake and do everything in one shot, including the re-tune.

Does it sounds like an exhuast leak almost? like a sort of chirping screech? as opposed to one monotone screech?

[SSShark]

Originally Posted by Hostile_1LE

Does it sounds like an exhuast leak almost? like a sort of chirping screech? as opposed to one monotone screech?

Yes, more like an intermittent flutter/chirping screech, depending on acceleration. But I also hear the inherent ticking which I understand is the nature of the beast when it comes to headers. I'm also curious if some of the noise could be coming from the AFM valves due to the great increase in pressure. This is all new to me, so please excuse my lack of knowledge.

[Joshinator99]

Car is always pretty dirty when I get back from the drag strip and I don’t like letting it sit like that, so it was a perfect day to scrub it all down. And then the wife sees me out with all of my cleaning supplies, so guess whose car got cleaned next lol…

[SSShark]

Originally Posted by Joshinator99

Car is always pretty dirty when I get back from the drag strip and I don’t like letting it sit like that, so it was a perfect day to scrub it all down. And then the wife sees me out with all of my cleaning supplies, so guess whose car got cleaned next lol…

Very nice stable Josh

[Joshinator99]

Originally Posted by SSShark

Very nice stable Josh

Thank you! First world problem of a brand new ‘24 Expedition sitting outside all winter because I’m out of garage space…

[SSShark]

Originally Posted by Joshinator99

Thank you! First world problem of a brand new ‘24 Expedition sitting outside all winter because I’m out of garage space…

Lol, first world problems indeed. Enjoy brother.

[DamonZ28]

Went with a CT Sounds 10" sub to replace my RE Audio sub. I can run this sub at 600W RMS at 1 Ohm stable with the same amp that could only run the RE Audio sub at 190W at 4 Ohms. Got it tuned this afternoon, and enjoying it so far.

[SSEssence]

Scored some unobtanium Camaro Panther Edition mats, so stoked with them and the metal emblems are rad!