|
|
#57 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,192
|
I can't tell all that you plan to do with the tire, but I just took R888R off and put RR on my car for the street. The 888 is as hard as a rock and really for track only. It sucks in the wet and cold on the street. Mine had 18% wheel spin at high speeds
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
#58 | ||
|
Petro-sexual
|
Quote:
Quote:
![]() ![]()
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
||
|
|
|
|
|
#59 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,556
|
Yep, it wasn't just me recommending these tires, King does too.
|
|
|
|
|
|
#60 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,556
|
Really is the difference in tire compound and purpose. The R888R is a road racing tire and made to perform when high tire temps can be sustained. The 555R2 has a softer compound made for drag racing that doesn't require as much heat for grip. If we were comparing the R888R to the original 555R, the decision would be much harder if handling were a factor also but the 555R2's stiffer sidewalls and revised compound compared to the original 555R made it a very good performance tire for all arounf performance. If I only had ONE dislike about the 555R2 is that's they don't have wheel guard built into the outer wall of the tire which takes away from their look when mounted on the wheel.
|
|
|
|
|
|
#61 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,449
|
This rating chart is what Nitto themselves say about the 555RII, and it isn't exactly all 5s. Every tire represents a compromise one way or another, it's a bit unfortunate that we can't have a tire that scores 4s and 5s in every category.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
#62 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,643
|
555r2 is the best solution imo for a weekend toy that you could still use for long trips if need be. It's not the best drag tire, it's not the best road course tire.. it's the jack of all trades tire. Hooks great dry, fair wet traction, handles good, quiet, balances well, and decent tread life. I have 18.5k miles on my car and getting ready to install a 3rd set. And they would likely go much longer if it wasn't for all the light burnouts before making pulls. I would guestimate 15-20k miles a set if you are being easy on them wouldn't be out of the question.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#63 | |
|
Petro-sexual
|
Quote:
I'll be trying the 555r2s this go around thanks to your guys input.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
|
|
#64 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,192
|
Quote:
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
|
#65 |
|
Banned
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Texas
Posts: 1,724
|
|
|
|
|
|
|
#66 |
![]() Drives: 2019 Chevrolet Camaro 2SS A10 Join Date: Jul 2019
Location: Hampton Va.
Posts: 556
|
I sure wish the Nitto’s came in 315/30/20 sizes
__________________
2019 Camaro 2SS A10 Procharged, Flexfuel, with Stainless Works headers back to Legend series mufflers.
Last edited by Justcruising; 08-22-2024 at 01:08 PM. Reason: Wrong spelling |
|
|
|
|
|
#67 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,643
|
No...RR. it's a race tire that is almost a slick but it hooks big power very well.
https://www.tirerack.com/tires/tires...s&gad_source=1
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#68 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,449
|
indeed it would be very nice for us with the non-1LE suspension setup
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
#69 |
![]() Drives: 19’ ZL1 A10 / 16’ C7Z M7 Join Date: Apr 2021
Location: Ft.Wayne, IN
Posts: 327
|
I run a 315/30/20 and 345/35/18 RR on the ZL1 and C7Z. I have a balloon 315/60/17 555RII’s on the Ram. They both work really well. I think when the new Toyo R comes out and I grab the 325/30’s I can get my ZL1 working really well out of second gear.
|
|
|
|
|
|
#70 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,192
|
I'll be watching to see how you like them. These RR won't last long.
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
|
|
|
Post Reply
|
|
|