02-15-2024, 01:25 PM | #1 |
Drives: 2024 LT1 Camaro Join Date: Nov 2023
Location: Florida
Posts: 6
|
2" HEADERS WITHOUT TUNE
Sup, wondering has anybody installed any headers and drove with out a tune & for how long? I know CEL will appear. I will be getting a tune but I am going the impatient route and wanting to install them already lol.
|
02-15-2024, 01:57 PM | #2 | |
Quote:
Wait for it.... Tuneless headers are kinda missing the point.
__________________
2018 Camaro SS 1LE - 2011 370z - 2004 VW R32 - 2000 Civic Si Mods: Rotofab, Nick Williams 103mm TB, MSD IM, Kooks 1 7/8 Results: 470 hp / 447 tq |
||
02-15-2024, 02:16 PM | #3 |
Snackbar Tuning
Drives: 2023 SGM ZL1 Join Date: Oct 2016
Location: Florida
Posts: 1,288
|
If you have emissions in your state/county, don't do it or you won't pass due to the permanent code set for the O2 sensors.
__________________
GM Gen V Calibrator
|
02-15-2024, 02:26 PM | #4 |
Drives: '16 2SS M6 Join Date: Aug 2019
Location: Hughes Springs, TX
Posts: 328
|
This has been asked many times, here is just one example. Also, you don't really need 2" headers unless you are planning a supercharger in the future.
https://www.camaro6.com/forums/showthread.php?t=581939
__________________
David
'16 2SS M6 black on black, SW long tube full exhaust, NPP, Roto-fab CAI, ported stock TB '16 2SS M6 black w/Metallic black stripes, Kalahari, 6 piston front (totaled 1/22/20) '14 Fusion Titanium 2.0T '83 Jeep Wagoneer |
02-15-2024, 04:41 PM | #5 |
Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016
Location: Georgia
Posts: 5,849
|
No definitely not without other mods to your engine!
__________________
ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.
|
02-16-2024, 08:45 AM | #6 | |
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Here
Posts: 1,493
|
Quote:
Patience young one. HP not going anywhere, and is up for grabs by anyone at any time.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | LS MSD Plug Wire Set | BTR Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR5IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
|
|
|
|
Post Reply
|
|
|