What did you do to your 6th Gen Camaro today?! - Page 1005

LeonardS · 10-17-2023, 05:18 PM

Quote:

Originally Posted by TurtleSS

Going to add 3m tape not happy with the rivets alone

Rokblokz….no rivets, no tape, completely reversible. About $100 for all four flaps.

SnakeEyeSS · 10-17-2023, 05:23 PM

Quote:

Originally Posted by Zapote21

Added some floor mats

Those look good! I thought about getting yellow for mine, Right now I have the factory embroidered mats. Had the Lloyd trunk mat though, They are nice.

Bumbleboy92 · 10-17-2023, 05:32 PM

Ceramic coated

Name: IMG_5151.jpg
Views: 600
Size: 202.2 KB

Name: IMG_5155.jpg
Views: 604
Size: 145.8 KB

Plus some shots taken/edited by a friend

ZPirate · 10-17-2023, 05:46 PM

Quote:

Originally Posted by Bumbleboy92

Ceramic coated

Attachment 1138624

Attachment 1138625

Plus some shots taken/edited by a friend

Very Nice!

I recently became a big fan of Summit White with black accents.

Bumbleboy92 · 10-18-2023, 02:17 AM

Quote:

Originally Posted by ZPirate

Very Nice!

I recently became a big fan of Summit White with black accents.

A while back I remember someone referenced it as Stormtrooper styling and I gotta say it's catching on for me

CalgaryZL1 · 10-18-2023, 05:10 AM

Updated my tail light bulbs to something a little brighter

6spdhyperblue · 10-18-2023, 05:55 AM

Quote:

Originally Posted by CalgaryZL1

Updated my tail light bulbs to something a little brighter

LED? Did u use resisters?

ZPirate · 10-18-2023, 07:27 AM

Made three changes to my ZL1 on Sunday.

1. Replaced the fuel door with a black "Camaro" fuel door with gloss black inserts.
2. Replaced the ZL1 emblem on the back of the car with a black and red ZL1 emblem.
3. Replaced the rear spoiler with a Mosaic Black spoiler to match the ZL1 trim.

Name: 20231015_093117.jpg
Views: 409
Size: 132.8 KB

Name: 20231015_093117.jpg
Views: 409
Size: 132.8 KB

Name: 20231015_121753.jpg
Views: 394
Size: 100.1 KB

Name: 20231015_143420.jpg
Views: 394
Size: 409.2 KB

NYTMARE23 · 10-18-2023, 08:01 AM

Quote:

Originally Posted by 6spdhyperblue

LED? Did u use resisters?

Not sure what Calgary used for bulbs, but I used the NOKYA 7440 Hyper White bulbs. No resistors needed and give it the "LED" look. All for about $28.00

. DEFINITELY look better than the incandescent "yellow-ish" bulbs.

. Unfortunately I was stupid and didn't get a side by side...so these will have to do..1st pic is incandescent..2nd is the NOKYA bulb..

Bumbleboy92 · 10-18-2023, 08:59 AM

Quote:

Originally Posted by NYTMARE23

Not sure what Calgary used for bulbs, but I used the NOKYA 7440 Hyper White bulbs. No resistors needed and give it the "LED" look. All for about $28.00

. DEFINITELY look better than the incandescent "yellow-ish" bulbs.

. Unfortunately I was stupid and didn't get a side by side...so these will have to do..1st pic is incandescent..2nd is the NOKYA bulb..

You’ve convinced me to give them a try, just got them off eBay for $19 for the pair. I’d rather not take off my bumper nor pay $90+ for the LED harness

NYTMARE23 · 10-18-2023, 10:00 AM

Quote:

Originally Posted by Bumbleboy92

You’ve convinced me to give them a try, just got them off eBay for $19 for the pair. I’d rather not take off my bumper nor pay $90+ for the LED harness

. Yeah. I was looking for something to replace those "yellowy" factory bulbs and knew I didn't want aftermarkets(bumper removal) and I didn't want to have to add resistors and such. Have had the NOKYA's in for a little over a year now. Still look great and no Hyper blinking or any other issues. Did the license plate bulbs too, but for those I used the Diode Dynamics license plate LED's(they are plug and play...no resistors for those either). Here are the pics of those(one of each..factory and diode dynamics, then one with both diode dynamics installed).

....sorry for the sideways pics!

Bumbleboy92 · 10-18-2023, 10:18 AM

Quote:

Originally Posted by NYTMARE23

. Yeah. I was looking for something to replace those "yellowy" factory bulbs and knew I didn't want aftermarkets(bumper removal) and I didn't want to have to add resistors and such. Have had the NOKYA's in for a little over a year now. Still look great and no Hyper blinking or any other issues. Did the license plate bulbs too, but for those I used the Diode Dynamics license plate LED's(they are plug and play...no resistors for those either). Here are the pics of those(one of each..factory and diode dynamics, then one with both diode dynamics installed).

....sorry for the sideways pics!

Very nice, do you remember if you went with the 6000K or 5000K from their website? (For the license plate bulbs)

NYTMARE23 · 10-18-2023, 12:25 PM

Quote:

Originally Posted by Bumbleboy92

Very nice, do you remember if you went with the 6000K or 5000K from their website? (For the license plate bulbs)

Thanks!! I did the 6000K on those.

CalgaryZL1 · 10-18-2023, 01:54 PM

Quote:

Originally Posted by 6spdhyperblue

LED? Did u use resisters?

No, they are a halogen but nice and bright

10-17-2023, 05:32 PM	#14059
Bumbleboy92 Long hauler Drives: 2022 Camaro 2SS 1LE Join Date: Mar 2017 Location: Houston, TX Posts: 2,005 View My Garage	Ceramic coated Plus some shots taken/edited by a friend __________________ 2022 2SS 1LE - Window Sticker - Cold Air Inductions Elite Carbon CAI 2016 1LT v6 - Totaled Happiness: Infinite

10-18-2023, 05:10 AM	#14062
CalgaryZL1 Drives: 2020 Chevy Camaro ZL1 Join Date: Apr 2023 Location: Calgary Canada Posts: 1,652	Updated my tail light bulbs to something a little brighter Attached Images

10-18-2023, 07:27 AM	#14064
ZPirate Drives: 2023 Summit White Camaro ZL1 M6 Join Date: Dec 2021 Location: North Carolina Posts: 1,910	Made three changes to my ZL1 on Sunday. 1. Replaced the fuel door with a black "Camaro" fuel door with gloss black inserts. 2. Replaced the ZL1 emblem on the back of the car with a black and red ZL1 emblem. 3. Replaced the rear spoiler with a Mosaic Black spoiler to match the ZL1 trim. __________________ 2023 Summit White ZL1 M6 (delivered 10/15/23) 2023 Dodge Durango SRT (daily driver) 2003 Nissan 350Z (modified) 2022 Rapid Blue 1SS 1LE M6 (delivered 2/19/22) (Sold) 2009 BMW 135i (Sold)

User Name		Remember Me?
Password