You are browsing camaro6 
03-08-2023, 12:55 PM
|
#1 |
 Drives: 2017 camaro ss 1le Join Date: Oct 2021
Location: Chicago
Posts: 79
|
Intank pump psi on startup?
Still having no start issue I think I narrowed down to the intank pump. I am only getting between 57-67 psi from the intank pump on cranking. This is per hptuner.
What is it supposed to be? |
|
|
|
03-08-2023, 02:53 PM
|
#2 |
 
Drives: '16 2SS M6 Join Date: Aug 2019
Location: Hughes Springs, TX
Posts: 329
|
Don't have the specs here at the office, but that should be sufficient to start and run, may need to be a little higher for full throttle.
__________________
David
'16 2SS M6 black on black, SW long tube full exhaust, NPP, Roto-fab CAI, ported stock TB '16 2SS M6 black w/Metallic black stripes, Kalahari, 6 piston front (totaled 1/22/20) '14 Fusion Titanium 2.0T '83 Jeep Wagoneer |
|
|
|
|
03-08-2023, 04:02 PM
|
#3 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
If you have the fuel pressure on the low side you listed its plenty to feed the HPFP and keep the fuel rails full.
|
|
|
|
|
03-08-2023, 04:51 PM
|
#4 |
|
Drives: 2017 camaro ss 1le Join Date: Oct 2021
Location: Chicago
Posts: 79
|
Wtf, this no start is pissing me off!
I have fuel it’s sounds like it fires it’s just won’t start. I’m out of ideas. |
|
|
|
|
03-09-2023, 05:56 AM
|
#5 |
         Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,584
|
Based on your similar thread, it sounds like the newly loaded tune may be the problem:
https://www.camaro6.com/forums/showthread.php?t=613774 |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
