|
|
#1 |
![]() Drives: 2021 Chevy Camaro ss Join Date: May 2022
Location: Rgv
Posts: 19
|
What are the best Email Remote Tuners for these 6th gens
Can’t decide what company I want to let remote tune my car , getting it local tuned is not an option due to where I’m at people don’t know how to tune at all!
Getting it sent out / trailered to a specific place is a no go either! I want to just get a email tune sent , do some data logs and of course use the wideband to get properly tuned There’s lots of companies such as GPI, Pray , Max Effort , LMR , etc ! Let me know what y’all have gone with it y’all have remote tuned and how did it go and how does the car run with that specific tuner |
|
|
|
|
|
#2 |
|
Having FUN in the SUN...
![]() Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 2,190
|
I think asking for the "BEST" tuner is a subjective term.
You will get some good and bad testimonials at best. I can recommend TED at Jannetty Racing. He is not the only one, but the one i used personally. Had great results, he has a ton of experience, and the process was smooth.
__________________
2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi
|
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
If I went remote, I think I would go with Ted with JRE. Just see his name a lot, and everyone seems to be happy working with him.
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Here
Posts: 1,841
|
Pray Performance is also well known
I used Phoenix Performance Calibration myself. I have no complaints about the tune, is the best out there hard to say without a baseline, but I was happy with them.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | Gen V Hinson Plug Wire Set | BTR 220 Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR6IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
|
|
|
|
|
|
#5 |
![]() ![]() ![]() Drives: 2019 zl1 6 speed Join Date: Jul 2017
Location: Lake Havasu Arizona
Posts: 1,135
|
I used Janettey with my last car, prob will use again. Prey Peformance is also really good!
|
|
|
|
|
|
#6 |
|
Account Suspended
Drives: Camaro SS 1LE Join Date: Aug 2018
Location: Phoenix
Posts: 1,538
|
Pray is supposed to be one of the best.
|
|
|
|
|
|
#7 |
|
Banned
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Texas
Posts: 1,724
|
Don't mean to derail this thread, but can a tuner see another tuners tune and edit it?
|
|
|
|
|
|
#8 | |
![]() Drives: 22 1LE Join Date: Mar 2022
Location: USA
Posts: 95
|
Quote:
|
|
|
|
|
|
|
#9 | |
|
Geoff
Drives: 2022 SS 1LE Join Date: May 2013
Location: Houston
Posts: 1,773
|
Quote:
I used Ted at JRE and am pleased with the results.
__________________
|
|
|
|
|
|
|
#10 |
![]() Drives: Chevy Camaro Join Date: Apr 2020
Location: Wi
Posts: 384
|
|
|
|
|
|
|
#11 |
![]() Drives: 2018 Chevy Camaro 1ss Join Date: Nov 2020
Location: Clare MICHIGAN
Posts: 62
|
Personally I wouldn't touch JRE again after dealing with ol Teddy. Tried Pray performance after JRE and waited 5 weeks for Pray to get me a start up tune and never got one. Contacted Phoenix performance Calibration and he had me up and running the very next day and always had a revised tune by the next day. Phoenix performance Calibration all day!
|
|
|
|
|
|
#12 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,485
|
i think all of the normals would be a safe choice. pray, gpi, max effort, etc. tune is paramount, choose wisely.
__________________
2016+ camaro: everyone’s first car
|
|
|
|
|
|
#13 |
![]() ![]() Drives: 2018 HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 891
|
My first tuner had only half the knowledge needed. So I was contacting all the tuners I could find. Just to throw a couple names not mentioned, Justin Schmidt who I found on facebook seems to do good work. I ended up using Greg Huggins who I found in the Hptuners forums and he has been extremely thorough and very knowledgeable with tuning these platforms. Most of them seem to be similarly priced as well, usually between $600-700
|
|
|
|
|
|
#14 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,195
|
Pray's become pretty choosy. You have to have a forged motor and WB, and even then it's a 50/50 deal. He might only be doing stroker motors now.
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
|
|
|
Post Reply
|
|
|