What did you do to your 6th Gen Camaro today?! - Page 794

willzilla · 11-30-2021, 11:47 PM

Messed around with my exhaust a little (got check engine light from small leak(s))... also emptied my elite engineering catch can (only had around 700-900 miles or so of casual driving):

Also cruised a little with some nice 4th gen f bodies to a little rides and coffee thing in San Antonio

willzilla · 11-30-2021, 11:48 PM

Quote:

Originally Posted by AZIROC

The TruFiber canards and air ducts came in today. im hoping to have them installed this weekend if time permits. **they are seperate pieces, i just had them mocked up. Now I just need to rewatch some YouTube videos on how to take the front bumper off

Those look nice! You have their lip as well??

Lewisracing · 12-01-2021, 08:08 AM

I just recently ordered an Anderson Composites hood for my car to finish the entire carbon ensemble for my racecar, pretty stoked!

Snakely · 12-01-2021, 11:20 AM

Tucked it away into winter storage. Thankfully, its store at a local detailing shop where they'll be doing a light correction, and ceramic coating over the winter

JKSully · 12-04-2021, 07:37 PM

After letting the PPF settle for a few days, finally got my rock guards installed, as well as the factory air deflectors on the front (I really just didn't want them washing/scratching it, but apparently my dealer took me very seriously when I said "don't do anything to it when it comes in"). I can't wash it til next weekend, and then I need to apply my sealant steps - so no pics yet.

DIYguy · 12-06-2021, 06:22 PM

Added a secondary 4 gauge ground cable between the battery and a conveniently mounted stud in the trunk floor well, as has been shown on other posts (such as- https://www.camaro6.com/forums/showt...t=ground+cable).
However I routed it through the current sensor on the OEM ground cable so as not to affect the charging system operation.
In the process I discovered that the negative battery terminal was a bit loose on the battery post..!
It had been a couple of years since I had paid any attention to it, so it was a lucky find.

Bobby65Chevy · 12-06-2021, 06:59 PM

Installed the Blendmount radar detector mount, changed out the floor mounts with the 1LE ones and changed the steering wheel badge. Also had the ZL1 Side skirts installed.

willzilla · 12-06-2021, 08:58 PM

Quote:

Originally Posted by Bobby65Chevy

Installed the Blendmount radar detector mount, changed out the floor mounts with the 1LE ones and changed the steering wheel badge. Also had the ZL1 Side skirts installed.

Nice, I went with the same mount... has been rock solid for a few months now

willzilla · 12-06-2021, 08:59 PM

Installed some cheap tinted overlays over the rear bumper reflectors... kind of derped it up a bit with a little to much heat while being distracted by more packages being delivered, haha, but still looks pretty good (will swap in the full reflector replacement in a few weeks).

*Joshinator99* · 12-08-2021, 07:48 PM

Since snow (and therefore salt) was in the forecast I threw some stabilizer in the tank and put her up on FlatStoppers for the winter. Then I decided to throw a 55” TV in the garage so that I can still go to a drive in movie this winter.

2SS Capt · 12-08-2021, 11:25 PM

Quote:

Originally Posted by Joshinator99

Since snow (and therefore salt) was in the forecast I threw some stabilizer in the tank and put her up on FlatStoppers for the winter. Then I decided to throw a 55” TV in the garage so that I can still go to a drive in movie this winter.

Damn, NICE garage!!!

Are those real 1LE wheels or are they MRR017? If so, are they the gunmetal gray? I LOVE those wheels...

Camaro fanboy · 12-09-2021, 06:16 AM

yeah stunning garage

*Joshinator99* · 12-09-2021, 08:41 PM

Quote:

Originally Posted by 2SS Capt

Damn, NICE garage!!!

Are those real 1LE wheels or are they MRR017? If so, are they the gunmetal gray? I LOVE those wheels...

Thanks! They are real 1LE ones for sure as I wanted fully forged. The OEM graphite color is the best IMO. I use these for my street setup and save my beadlocks for the drag strip.

Quote:

Originally Posted by Camaro fanboy

yeah stunning garage

Thanks!

MyneS · 12-10-2021, 04:17 PM

Added that Heritage armrest today…bought it from a member on here.

Now I’m thinking about getting the mats to match.

12-01-2021, 08:08 AM	#11105
Lewisracing Drives: 2018 1SS 1LE Hyper Blue Metallic Join Date: Nov 2018 Location: MD Posts: 35	I just recently ordered an Anderson Composites hood for my car to finish the entire carbon ensemble for my racecar, pretty stoked! __________________ @Lewisracing1018 Instagram: Lewisracing1018 YouTube: https://www.youtube.com/@JLewisRacing927 NASA ST/TT #927 (HSR soon) My build thread: https://www.camaro6.com/forums/showthread.php?t=620013

12-01-2021, 11:20 AM	#11106
Snakely Drives: '21 Wild Cherry 2SS M6 Join Date: Nov 2020 Location: Auburn, Indiana Posts: 59	Tucked it away into winter storage. Thankfully, its store at a local detailing shop where they'll be doing a light correction, and ceramic coating over the winter __________________ 2021 Wild Cherry 2SS, M6, NPP, MRC https://natmus.org

12-04-2021, 07:37 PM	#11107
JKSully Drives: 22 Camaro 2SS, 20 Subaru Crosstrek Join Date: Aug 2021 Location: DFW TX Posts: 571	After letting the PPF settle for a few days, finally got my rock guards installed, as well as the factory air deflectors on the front (I really just didn't want them washing/scratching it, but apparently my dealer took me very seriously when I said "don't do anything to it when it comes in"). I can't wash it til next weekend, and then I need to apply my sealant steps - so no pics yet. __________________ Earth is an oblate spheroid 2022 \| 2SS \| M6 \| NPP \| Summit White \| Carbon Flash Wheels \| Black Lugs \| Red Calipers \| Adrenaline Red \| Red Knee Pads \| Nav \| - 1100 - 8/16/21 - 3000 - 9/21/21 - TPW 10/18/21 - 3400 - 10/1/21 - 3800 - 10/20/21 - built 10/19/21 - 5000 - 11/12/21 - 6000 - 11/13/21

12-06-2021, 06:22 PM	#11108
DIYguy Drives: 2017 Camaro 1LT Join Date: Mar 2019 Location: California Posts: 243 View My Garage	Added a secondary 4 gauge ground cable between the battery and a conveniently mounted stud in the trunk floor well, as has been shown on other posts (such as- https://www.camaro6.com/forums/showt...t=ground+cable). However I routed it through the current sensor on the OEM ground cable so as not to affect the charging system operation. In the process I discovered that the negative battery terminal was a bit loose on the battery post..! It had been a couple of years since I had paid any attention to it, so it was a lucky find. __________________ Gen6 Camaro LT (my daily driver), Cruze ECO (grocery getter), Chevy SS Pickup (wife's daily driver), Honda Shadow, Honda CBX

12-06-2021, 06:59 PM	#11109
Bobby65Chevy Drives: 2022 2SS 1LE,65 CHEVELLE SS Join Date: May 2021 Location: Riverside, CA Posts: 95	Installed the Blendmount radar detector mount, changed out the floor mounts with the 1LE ones and changed the steering wheel badge. Also had the ZL1 Side skirts installed. Attached Images __________________ 2022 Wild Cherry Tintcoat 2SS 1LE A10

12-08-2021, 07:48 PM	#11112
Joshinator99 Moderator Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018 Location: Petersham MA Posts: 6,202	Since snow (and therefore salt) was in the forecast I threw some stabilizer in the tank and put her up on FlatStoppers for the winter. Then I decided to throw a 55” TV in the garage so that I can still go to a drive in movie this winter. Attached Images __________________ 2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)

12-09-2021, 06:16 AM	#11114
Camaro fanboy Drives: 2017 2SS Arctic blue fully loaded Join Date: Mar 2021 Location: SWEDEN Posts: 880	yeah stunning garage __________________

12-10-2021, 04:17 PM	#11116
MyneS STORM Drives: 2021 Satin Steel Metallic 2SS Join Date: Jan 2016 Location: DFW Posts: 387	More customization Added that Heritage armrest today…bought it from a member on here. Now I’m thinking about getting the mats to match. Attached Images __________________ IG: nacol2012 Check out: The creation of STORM American Authority Front Bumper, ACS Rockers, GM Dark taillights, ZL1 Carbon Fiber interior dash, Engine Bay “red hot” Dress Up, 6LE Skorpion hood, Borla ATAK w Xpipes (TRADED)

User Name		Remember Me?
Password