You are browsing camaro6 
10-06-2020, 06:51 AM
|
#1 |
 Drives: 2013 Camaro ZL1 Join Date: May 2013
Location: WA
Posts: 104
|
Anyone know if these trims will fit?
When I buy a new ZL1 soon ... I'd like to swap out the factory rims. I really like my black 10-spoke factory rims off of my 2013 ZL1. Will these fit on the new ZL1's? Basically is the offset, width, hole pattern all the same? If they won't work, who makes a set of rims that are VERY similar.
|
|
|
|
10-06-2020, 08:33 AM
|
#2 |
|
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,648
|
Yeah they would fit but I'd have to say you don't see older rims on newer cars very often. Also, the tires might be a little to tall. The 5gen tire size is like 28.5" the 6gen is more like 27 so it'll change the gearing and ride a bit. You'll want a lower profile tire on them if you do.
|
|
|
|
|
10-06-2020, 09:23 AM
|
#3 |
|
Drives: 2013 Camaro ZL1 Join Date: May 2013
Location: WA
Posts: 104
|
Thanks. I knew tire size was different and planned on getting the correct tires on it.
|
|
|
|
|
10-06-2020, 05:52 PM
|
#4 |
|
Geoff
Drives: 2022 SS 1LE Join Date: May 2013
Location: Houston
Posts: 1,773
|
ladykiller
the front offset is 3mm more on the 2013 wheels (+23 for 5th gen and +20 for 6th gen). if you plan to track the car, it would be best to use a 3mm spacer on the front to get the tire patch where it is supposed to be. you will need to decide if you want longer front lug studs to keep yourself comfortable. not difficult, just something else to think about. I track my car with 5th gen wheels left over from my 1LE with a spacer and longer studs
__________________
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
