[HypeBlueZL1]

Originally Posted by getchapull

I'll use a vacuum brake bleeder. Suck out the reservoir 1st, then work on the bleeder screws.

So the order of suckage is furthest away from reservoir to closest like most vehicles? Anyone know the size of the bleeder screws?

Any tips for this car from the pros?

Thanks.

Actually the bleed order is like a lot of other GM products. Right rear, then front left, left rear, then front right. For the fronts bleed the inner first, then the outer.

[Stephen12ZL1]

Originally Posted by getchapull

I'll use a vacuum brake bleeder. Suck out the reservoir 1st, then work on the bleeder screws.

Anyone know the size of the bleeder screws?

11mm

[getchapull]

Thanks fellas. Probably use Preston DOT 3 brake fluid since I don't track.

[Stephen12ZL1]

Originally Posted by getchapull

Thanks fellas. Probably use Preston DOT 3 brake fluid since I don't track.

Use a brand name like Valvoline synpower at least. Prestone Dot 3 I suppose is okay, but it's what I would choose for a lesser vehicle. Dollar General brake fluid is likely the same as Prestone.