[2018ZL1]

Originally Posted by JonDaddy82

Don't forget these two as good options. Less than Welds, not as poverty appearing as poverty stars. To me, Welds are just crazy priced. It's a wheel. It just needs to be round and stay round for at least 10-12 seconds a few times a year....can't possibly be that hard!

https://www.vmsracing.com/products/c...6-part-vwst015

https://pkautodesign.com/shop/wheels...racing-wheels/

Thats great!! poverty stars!!! I just purchased a set of these Forgestars 17x10 rear with a beadloack and 18x5 fronts for $1800 shipped! Not poverty but not the royalty welds!

[JonDaddy82]

Originally Posted by 2018ZL1

Thats great!! poverty stars!!! I just purchased a set of these Forgestars 17x10 rear with a beadloack and 18x5 fronts for $1800 shipped! Not poverty but not the royalty welds!

I think the Forgestars are very good value, impossible to go wrong.

[2018ZL1]

Originally Posted by JonDaddy82

I think the Forgestars are very good value, impossible to go wrong.

I think so as well! I will let you know soon enough! The front poverty star I had on my car was out of round! It balanced fine but at 136 MPH the wheel was shaking pretty violently! I thought maybe it was a flat spot on the tire but it was the rim! Paul was a good guy to deal with as well...

[FoundNemo]

Originally Posted by JonDaddy82

Give Paul a shout at PK Auto, he’s the Forgestar dealer and is awesome at answering all the technical questions.

Done deal sir. Who may I tell him sent me, always like to spread the cred

[JonDaddy82]

Originally Posted by FoundNemo

Done deal sir. Who may I tell him sent me, always like to spread the cred

I'd say the patrons of the Camaro6 forum should do the trick, he's actually very active in the Wheel & Tire section of this forum anyways. Note, VMS has an occasional sale which takes their full set of wheels from $969 to the mid $800's for the full set. If you where looking for rears only they'd be cheaaaap cheap cheap.

[Flexhorn]

Originally Posted by FoundNemo

Not sure what you mean by an inch less sidewall height than stock. Stock is 305/35R20 which has a 4.2" sidewall and a 315/35R17 radial is a 4.3" sidewall. Overall tire diameter and wheel diameter is proportionately smaller front and back, but the sidewalls are comparable.

Isn’t stock a 305/30R/20? I just accidentally got shipped a rear set of 35R’s and they’re too big rubbing.

[FoundNemo]

Originally Posted by Flexhorn

Isn’t stock a 305/30R/20? I just accidentally got shipped a rear set of 35R’s and they’re too big rubbing.

ZL1 is 285/30R20 and 305/30R20 stock indeed.

[FoundNemo]

Originally Posted by JonDaddy82

I'd say the patrons of the Camaro6 forum should do the trick, he's actually very active in the Wheel & Tire section of this forum anyways. Note, VMS has an occasional sale which takes their full set of wheels from $969 to the mid $800's for the full set. If you where looking for rears only they'd be cheaaaap cheap cheap.

Thx sir!!!