02-21-2020, 06:26 PM | #1 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
Wheel to caliper clearance?
Just bought a rear drag set up 17x10.5.”
Rear caliper clearance is close. I don’t have a gauge but I can fit 8 sheets of paper between them. What would be too close? |
02-21-2020, 08:45 PM | #2 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,815
|
nah...should be fine unless the wheel isn't perfectly true. Drive it slowly and feel/listen for any scraping.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
02-22-2020, 06:19 AM | #3 |
Drives: 2017 ZL1 Camaro Join Date: May 2018
Location: Iowa
Posts: 100
|
Is it 8 sheets of regular printer type paper? If so that's roughly .025"-.032"
I thought I've heard over the years that .100" is the minimum wheel clearance needed. I would get with the wheel manufacturer and get their input.
__________________
2017 Garnet Red ZL1 A10
Other Rides, 97 Trans Am, 72 Chevelle |
02-22-2020, 04:28 PM | #4 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
I’ll call the manufacture on Monday. I’ll get a feeler gauge tomorrow to try and be more accurate. I hope they workout
|
02-22-2020, 05:24 PM | #5 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Makoz28, did you pickup a set of those VMS Racing wheels?
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
02-22-2020, 06:39 PM | #6 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
|
02-25-2020, 06:16 PM | #7 |
Life's Short, Live Fast!
Drives: 2017 Hyper Blue A10 ZL1 Join Date: Nov 2016
Location: London, KY
Posts: 2,015
|
You're fine with the Race Stars. I run a set on mine. I have had a rock get in there and scratch my wheel, but you only see it when the wheel is off.
__________________
Life's Short, Live Fast! https://youtu.be/rTUv2p4T7OA 10.94 at 128 mph, 11.13 at 127mph 870 DA, https://youtu.be/e_X_LcpFp50 11.19 at 127mph 1100 DA, https://youtu.be/OXQiCQdQuH4 11.40 at 125mph 1800 DA
https://youtu.be/uWba1qs8M6Q 11.52 at 123mph 3500 DA TZQPHG '17 ZL1 HBM|A10|Nav|PDR|CFW Hood|ZL1 Mats 12/26/2016 Ordered! 2/8/2017 Built!! 3/2/2017 Brought Home!!! |
02-25-2020, 07:15 PM | #8 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Huh, interesting. I thought they’d be golden after seeing that one dude test fit them.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
02-29-2020, 11:03 PM | #9 |
Drives: 1968 Camaro and 2019 ZL1 Join Date: May 2019
Location: CA
Posts: 51
|
I run Forgestar F14 by 17" with MT Et Streets. Eye balling it, it is close with maybe a 1/4 inch at most. It clears the calipers OK.
|
03-01-2020, 10:19 AM | #10 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
I ran them after all. They worked great. Had the weights mounted to the rear tho. Tires worked perfectly. Drive shaft not so much.
This link for more Details https://www.camaro6.com/forums/showthread.php?t=570977 |
|
|
Post Reply
|
|
|