New Owner 2018 Camaro 2.0T-Any Mods Available ? - Page 2

cooper1965 · 03-15-2018, 11:43 AM

Quote:

Originally Posted by Ian@Borla

Hello! We have actually confirmed fitment of our current systems for the 2018 2.0L Turbo Camaros. Thank you!

Hey Ian, how about Borla's downpipe? I noticed my 18 downpipe has a different casting number and tag than the downpipe I pulled off of my 16, they "look" the same from under the car, but I haven't actually taking mine off the 18 to be positive yet.

Tiesto996tt · 03-16-2018, 12:53 PM

Quote:

Originally Posted by Ian@Borla

Hello! We have actually confirmed fitment of our current systems for the 2018 2.0L Turbo Camaros. Thank you!

Thank Ian, I will contact Borla directly. Can you give me exact part # for 2018 Camaro 2.0 liter. Want to make sure it is correct. TIA

Tiesto996tt · 03-16-2018, 01:02 PM

Quote:

Originally Posted by ChicagoTommy

Congrats on the purchase. Maybe snap a few pics of the areas you want to mod, so we can compare them to the 16/17 parts that are already out there.

I think it's weird that Injen is saying they're getting a CEL with the 7300. That intake has been a stout performer.

Do you have HP Tuners by chance?? I'd love to take a look at the stock file to see if I can identify any changes made to airflow parameters.

Thanks Tommy, I just want to upgrade exhaust and intake right now. Maybe getting tuned once my warranty is over. So I think I will just order Atak by Borla exhaust now that they are available and drop in K&N air filter. I dont like check engine light. It is very annoying. lol

ChicagoTommy · 03-19-2018, 12:35 PM

I doubt you would get a CEL just using the ZZP tube.

https://zzperformance.com/ats/ats-lt...take-tube.html

Ian@Borla · 04-04-2018, 01:08 PM

Quote:

Originally Posted by cooper1965

Hey Ian, how about Borla's downpipe? I noticed my 18 downpipe has a different casting number and tag than the downpipe I pulled off of my 16, they "look" the same from under the car, but I haven't actually taking mine off the 18 to be positive yet.

I apologize for the delayed response! I did not receive an email notification. Part Number 60623 (2.0L Turbo Camaro Downpipe) will work for the 2016-2018 model years.

Quote:

Originally Posted by Tiesto996tt

Thank Ian, I will contact Borla directly. Can you give me exact part # for 2018 Camaro 2.0 liter. Want to make sure it is correct. TIA

Axle-Backs:

S-Type: Part # 11933
ATAK: Part # 11934

Mid-Pipes (Works with the axle-back to make a cat-back)
*Not intended for use with the factory mufflers

Part # 60622

Again, I'm sorry about the late response. Please feel free to PM or email me. You can also call us at 1-877-462-6752 (Monday-Friday 7:30am-4:00pm PST).

Thank you all!

SSShark · 09-12-2018, 11:18 AM

Hi all,

I'm new to the forum. Just got my 2018 2.0T 3 weeks ago. I'm loving it and will probobly go with an axle back exhaust soon. Any advice on which configuration would sound throatiest?

Austin_504 · 09-13-2018, 02:50 PM

Quote:

Originally Posted by nyfl2004

Hi all,

I'm new to the forum. Just got my 2018 2.0T 3 weeks ago. I'm loving it and will probobly go with an axle back exhaust soon. Any advice on which configuration would sound throatiest?

I would look through the forums and search youtube for exhaust clips to help you make your decision.

SSShark · 09-13-2018, 08:23 PM

Thanks man. I've been scouring all the youtube videos and, for me, nothing stands out except for the Borla S-type axle back and the Borla Atak axle back. The factory Chevrolet Exhaust upgrade actually sounds pretty good too.
Not looking for anything too extreme, just a little tougher.

Start The Machine · 09-13-2018, 11:47 PM

Here is my $.02

https://m.youtube.com/watch?v=7hz2fOJxuCo

https://m.youtube.com/watch?v=6EzFVSuIsEs

https://m.youtube.com/watch?v=H1fVNSl8a-I

Evil-Bee-NH · 09-14-2018, 08:56 AM

Quote:

Originally Posted by nyfl2004

Thanks man. I've been scouring all the youtube videos and, for me, nothing stands out except for the Borla S-type axle back and the Borla Atak axle back. The factory Chevrolet Exhaust upgrade actually sounds pretty good too.
Not looking for anything too extreme, just a little tougher.

The GM Performance Exhaust is a rebranded Borla.

SSShark · 09-14-2018, 05:42 PM

Quote:

Originally Posted by Start The Machine

Here is my $.02

https://m.youtube.com/watch?v=7hz2fOJxuCo

https://m.youtube.com/watch?v=6EzFVSuIsEs

https://m.youtube.com/watch?v=H1fVNSl8a-I

That actually sounds pretty good. Doesn't make the decision any easier for me, I guess I overthink sometimes. I appreciate the links man!

SSShark · 09-14-2018, 05:47 PM

Quote:

Originally Posted by Evil-Bee-NH

The GM Performance Exhaust is a rebranded Borla.

No kidding. It's funny, the GM exhaust is about $1295 from GMPartsDirect and about $1595 from the dealer. Both are catback. The Borla axle back is about $800. Doesn't manke sense to buy from GM.

BTW, I see that you have headers installed on your 2.0?

03-19-2018, 12:35 PM	#18
ChicagoTommy Drives: 2017 Camaro; 2017 Acadia Denali Join Date: Jun 2016 Location: Chicago, IL/Williams Bay WI Posts: 1,022	I doubt you would get a CEL just using the ZZP tube. https://zzperformance.com/ats/ats-lt...take-tube.html __________________ This is in no way a personal attack or confrontation, and is not necessarily the view of the management or sponsors, and the thoughts contained herein are mine, and is not intended to hurt anyone's feelings or ruin their delicate self esteem, or to invalidate anyone's personal views or thoughts, nor is it a condemnation of anyone's race, religion, sex, sexual preferences, handicaps, or intellectual abilities.

09-12-2018, 11:18 AM	#20
SSShark Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018 Location: South Florida Posts: 1,536	Hi all, I'm new to the forum. Just got my 2018 2.0T 3 weeks ago. I'm loving it and will probobly go with an axle back exhaust soon. Any advice on which configuration would sound throatiest? Last edited by SSShark; 09-12-2018 at 05:51 PM.

09-13-2018, 11:47 PM	#23
Start The Machine Drives: 2016 M6 2.0T Join Date: Nov 2016 Location: Gig Harbor, WA Posts: 863	Here is my $.02 https://m.youtube.com/watch?v=7hz2fOJxuCo https://m.youtube.com/watch?v=6EzFVSuIsEs https://m.youtube.com/watch?v=H1fVNSl8a-I __________________ RS Package, HD Cooling Package, Brembo 6 Piston Front Brakes, SRP Racing Pedals, Soler Performance Throttle Controller, Dyno Tuned by Trifecta, Velossa Tech Ram Air, Mishimoto Intake, aFe Air Filter, Mishimoto Charge Pipes, ZZP 67mm Throttle Body, Trifecta T40 Stage 2 Turbo, JacFab Recirculation Valve, PTP Turbo Blanket, ZZP Catted Downpipe, Mishimoto Pro Cat-Back Quad Tip Exhaust, Mishimoto Catch Cans, Mishimoto Coolant Reservoir Tank, GM SEMA Grill, RPI Designs SS 1LE Front Fascia Extension, Ikon Motorsports 1LE Spoiler, American Authority ZL1 Side Skirts, AMPP Quad Tip Rear Valance

09-13-2018, 08:23 PM	#22
SSShark Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018 Location: South Florida Posts: 1,536	Thanks man. I've been scouring all the youtube videos and, for me, nothing stands out except for the Borla S-type axle back and the Borla Atak axle back. The factory Chevrolet Exhaust upgrade actually sounds pretty good too. Not looking for anything too extreme, just a little tougher.

User Name		Remember Me?
Password