2nd Dyno Pull Set for Tomorrow. Guess my HP/Torque and get a $500 credit at Weapon X - Page 13

Can'tHave2MuchHP · 08-09-2018, 11:01 PM

Quote:

Originally Posted by kttxz06

I listed the Kooks part # above btw if u missed it. Let me know if you run into any deals better than $973 shipped.

PMed you.

kttxz06 · 08-09-2018, 11:12 PM

Quote:

Originally Posted by Can'tHave2MuchHP

Haha. That's funny right there. Trade in engineered mufflers with zero drone and great sound control for some blatty glass-pack-esque junk just there to do about nothin'. Nope. Get the X pipe and that's it. I'm not sure if it necks down to 2.75" but that's what your Corsa axle back is so it's going to need some kind of adapter or special clamps, if it doesn't neck down.

I'm sure my guys can make it fit. I'll email Kooks to ask if it does neck down.

JamesNoBrakes · 08-09-2018, 11:39 PM

Three

Ricco · 08-10-2018, 07:56 AM

Quote:

Originally Posted by kttxz06

I'm sure my guys can make it fit. I'll email Kooks to ask if it does neck down.

It does. I mates to the stock NPP on my car which is 2.75”

Sent from my iPhone using Tapatalk

Ricco · 08-10-2018, 07:58 AM

Quote:

Originally Posted by Can'tHave2MuchHP

.....one clamp and one bracket or whatever you want to call the passenger side connection....

It’s called a flange.

Sent from my iPhone using Tapatalk

*mlee* · 08-10-2018, 10:04 AM

Quote:

Originally Posted by Can'tHave2MuchHP

I am aware, but notice how it attaches. Not correct for LT Headers. Compare it to Kooks X pipe pictures and you can see that the Headers both dump out at more even points and they're slide-over-and-clamp and not one clamp and one bracket or whatever you want to call the passenger side connection.

Here's a listing that will give you an idea of how their X Pipe (Meant for Headers only) attaches: https://www.kooksheaders.com/automot...shed-tips.html

Much different than the above Corsa 14788 which again is meant to connect to stock shorty headers and primary cats, exactly like the Borla 60606 that I run now. My mistake on 2.75", the 2.75" only applies to the axle backs.

My bad... I'm just now seeing this new Corsa stuff. They never used to sell just axle backs or individual pieces before... glad to see that.

I'm about to pull the trigger on a full system and have hit here before my car gets here. Already have a spare set of wheels on order.

I'm pretty sure Kooks sells that X-pipe both ways neck down to 2.75 or straight 3"

EDFHOBBIES · 08-10-2018, 10:50 AM

jrod and sorian are friends w Aldo have them pop over and make something..

Can'tHave2MuchHP · 08-10-2018, 12:19 PM

Quote:

Originally Posted by Ricco

It’s called a flange.

Sent from my iPhone using Tapatalk

Duh. Don’t know why I didn’t think of that.

Quote:

Originally Posted by mlee

My bad... I'm just now seeing this new Corsa stuff. They never used to sell just axle backs or individual pieces before... glad to see that.

I'm about to pull the trigger on a full system and have hit here before my car gets here. Already have a spare set of wheels on order.

I'm pretty sure Kooks sells that X-pipe both ways neck down to 2.75 or straight 3"

Do it Mike. You won’t regret it. I’m considering ordering the Corsa X just to get rid of the Borla. The double helixx will likely be mildly quieter and a bit less “blatty” if it’s like the C7 Z.

kttxz06 · 08-10-2018, 12:35 PM

Emailed my Kooks rep. Their X pipe does flange down to 2.75. Talk about perfect fitting. No welding, no nothing. Just clamp to header and clamp to the Corsa Axle Back. Done.

kttxz06 · 08-10-2018, 12:37 PM

Quote:

Originally Posted by EDFHOBBIES

jrod and sorian are friends w Aldo have them pop over and make something..

Unfortunately, Aldo, even tho I love him to death. He's gone sky high on his pricing now that he's playing with the big boys. Besides, he's on the other side of town. When we asked him to make an Ice Tank for the 6th Gen, he said, $1200. Bwahahahaha. I was like, dude, I've known you since your import days, hook me up. If it ain't a Mustang, he ain't working on it it seems. He has Mustangs lined up like crazy now due to his insane TT kit.

Can'tHave2MuchHP · 08-10-2018, 12:40 PM

Quote:

Originally Posted by kttxz06

Emailed my Kooks rep. Their X pipe does flange down to 2.75. Talk about perfect fitting. No welding, no nothing. Just clamp to header and clamp to the Corsa Axle Back. Done.

Nice. Bolt on and roll.

kttxz06 · 08-10-2018, 12:43 PM

Quote:

Originally Posted by Can'tHave2MuchHP

Nice. Bolt on and roll.

Yep, which is why it's $1000. haha.

IneedAZ · 08-10-2018, 12:48 PM

Quote:

Originally Posted by kttxz06

Yep, which is why it's $1000. haha.

will it only bolt on if using Kooks headers?

kttxz06 · 08-10-2018, 12:50 PM

Quote:

Originally Posted by IneedAZ

will it only bolt on if using Kooks headers?

It seems that way yes.

08-09-2018, 11:39 PM	#171
JamesNoBrakes Drives: 2SS 1LE Join Date: Oct 2011 Location: AK Posts: 2,377	Three __________________ Everything happens for a reason, except when it doesn't, but even then, you can, in hindsight, fabricate a reason that satisfies your belief system. 2018 2SS 1LE 2023 Colorado ZR2 2022 Stinger GT-line AWD

08-10-2018, 10:50 AM	#175
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	jrod and sorian are friends w Aldo have them pop over and make something.. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

08-10-2018, 12:35 PM	#177
kttxz06 Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016 Location: Katy Posts: 2,104	Emailed my Kooks rep. Their X pipe does flange down to 2.75. Talk about perfect fitting. No welding, no nothing. Just clamp to header and clamp to the Corsa Axle Back. Done. __________________ There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.

User Name		Remember Me?
Password