[6th_gen_gino]

Originally Posted by Michigan1LTRS

That's awesome Gino!! 311 at the wheels

Thank you sir

[Evil-Bee-NH]

Originally Posted by Michigan1LTRS

That's awesome Gino!! 311 at the wheels

I missed you.

[Michigan1LTRS]

I'm still here This car is awesome.

[Evil-Bee-NH]

Originally Posted by Michigan1LTRS

I'm still here This car is awesome.

There's a few that go into hibernation during the winter months. Others have better things to do.

[Mjollnir]

That's awesome another 30+ at the wheels!
I can confirm the same results with ZZP's tune as my dyno came in at 274.
Thanks for posting and congrats Gino!

[6th_gen_gino]

Originally Posted by Mjollnir

That's awesome another 30+ at the wheels!
I can confirm the same results with ZZP's tune as my dyno came in at 274.
Thanks for posting and congrats Gino!

Thanks, yea that seems to be the average Dyno numbers for ZZP. Had a buddy drive 10+ hours to the shop and made 270ieh whp. Now he's getting in contact with my tuner

[Trice624]

So how much do you want to send me a copy of your tune file for comparison lol

[Evil-Bee-NH]

Dunno what's going on in the ZZP tune myself but there's been a lot of talk about very underwhelming results which makes me think they are being conservative which is all well and good but did the customer ask for a conservative tune? is what I'm getting at if you did then i can't find any fault with ZZPs tune.

[6th_gen_gino]

Originally Posted by Trice624

So how much do you want to send me a copy of your tune file for comparison lol

I don't hptuners, so i couldn't send it even if I wanted to

[ChicagoTommy]

Originally Posted by 6th_gen_gino

So pay them for a tune and then pay how ever long it takes on the Dyno, I'm on a military paycheck brother I don't make enough. The owner of the Dyno felt bad and knew my brother in law so he let us use the Dyno at 20 bucks an hour after he saw how disappointed I was with my ZZP tune. My brother also didn't charge me anything, he even payed my credits with HPTuners, I wish I would have trust him from the jump and avoided all this.

What is the retail rate for dyno time? In my area it is typically $100 per hour. If you had HPT, I'd gladly pay for a couple hours of dyno time, as long as you were willing to work with ZZP and allow them to make changes. As I said in the other thread, I think ZZP would make more power if you had actually worked with them rather than just bashing them.

[ChicagoTommy]

Originally Posted by Evil-Bee-NH

Called it Gino knew he'd say something like that. ZZP doesn't call for you to be on a dyno you drive you datalog you send it to them they make tweaks send it back and you update.

No, ZZP does not require you to run on a dyno. However, they are willing to work with you if you have a dyno available. Obviously not everyone has a $50k machine at their disposal. Duh.

[ChicagoTommy]

Originally Posted by Evil-Bee-NH

Dunno what's going on in the ZZP tune myself but there's been a lot of talk about very underwhelming results which makes me think they are being conservative which is all well and good but did the customer ask for a conservative tune? is what I'm getting at if you did then i can't find any fault with ZZPs tune.

Who else beside Gino, who didn't even bother to take full advantage of their service has produced sub par results? Name names, otherwise keep your opinion to yourself.

[Evil-Bee-NH]

BomberCamaro now why don't you contribute or leave yourself?

[6th_gen_gino]

Originally Posted by ChicagoTommy

Who else beside Gino, who didn't even bother to take full advantage of their service has produced sub par results? Name names, otherwise keep your opinion to yourself.

I could list a couple of names but that doesn't help anything...I actually posted my results for another 2.0t driver since he drove 10 hours to ZZP just to be disappointed.