New Recall: "Body Control Module Enhancement" - Page 11

david_acm · 04-02-2025, 10:50 AM

Quote:

Originally Posted by 2SS Capt

On my car that feature is activated by pressing and holding the unlock button on the fob...

Yeah same, I use it all the time but it wasn't working when they handed the keys back to me

VR Baron · 04-02-2025, 11:15 AM

Quote:

Originally Posted by TurboC3

After the update...Bad news. 12min and a programmer= new key. It pulled the pin in 2min then 10min to program...SAD.

Well that sucks. Maybe doesn’t allow cheap programmers but allows GM certified expensive ones as gm said let’s techs to obviously do their job. But another layer of protection I guess. Still have the rest of my security layers intact

*radz28* · 04-02-2025, 11:20 AM

What if we disconnect power to the OBD2 port? Will that stop communications with any devices to the car/BCM/etc.?

TurboC3 · 04-02-2025, 11:30 AM

Quote:

Originally Posted by radz28

What if we disconnect power to the OBD2 port? Will that stop communications with any devices to the car/BCM/etc.?

No, I tried that. Pulled the OBD port fuse. The programmers power up the port, when plugged in.

*radz28* · 04-02-2025, 11:32 AM

Quote:

Originally Posted by TurboC3

No, I tried that. The programmers power up the port, when plugged in.

Sorry for continued silly questions - just brainstorming...

Is there a communication wire in the port we can disconnect? Is there a way to interrupt the communication with a remote switch or something?

THANK YOU FOR YOUR EFFORTS, REGARDLESS. This looks like it's been an expensive exercise, but I, for one, appreciate it.

TurboC3 · 04-02-2025, 12:00 PM

Someone posted the wiring diagram, yes there are several possibles. Trying not to cut wires. But at this point, moving/hiding and adding a lock to OBD port is critical.

Roddrz · 04-04-2025, 12:34 PM

The updates on the software progress are much appreciated TurboC3!

For awareness, I've just included an additional security lock feature to the hood latch handle, from inside the vehicle, complementing (layering) many of the previously outlined solutions from many of the Camaro6 posts.

Jeffd1324 · 04-04-2025, 04:00 PM

Got the update today, as promised no issues with it being tuned. Would be nice if we found out what this was actually for.

len_eng · 04-05-2025, 04:38 PM

I got the update a week ago. The one thing I noticed is that unlike before it does not automatically lock the doors after a few seconds the way it used to. I have also not been able to locate where on the preferences menu you can turn it back on.

dfxrte · 04-05-2025, 06:30 PM

seems its not worth it might cancel my appt, if you have other measures in place already

Jeffd1324 · 04-05-2025, 07:15 PM

Quote:

Originally Posted by len_eng

I got the update a week ago. The one thing I noticed is that unlike before it does not automatically lock the doors after a few seconds the way it used to. I have also not been able to locate where on the preferences menu you can turn it back on.

Noticed the same thing. It’s in there if you dig a little.

Kamero6 · 04-06-2025, 12:15 PM

Quote:

Originally Posted by david_acm

Yeah same, I use it all the time but it wasn't working when they handed the keys back to me

I got the update. I can confirm, the auto windows down doesn't work anymore.

arpad_m · 04-06-2025, 12:35 PM

Quote:

Originally Posted by david_acm

Just got the update and one thing I noticed is that double tapping unlock to roll the windows down isn't working.

Quote:

Originally Posted by Kamero6

I got the update. I can confirm, the auto windows down doesn't work anymore.

Were you guys able to turn it back on somehow in the settings, or did GM remove the feature in this update altogether?

Bumbleboy92 · 04-06-2025, 04:35 PM

Quote:

Originally Posted by david_acm

Just got the update and one thing I noticed is that double tapping unlock to roll the windows down isn't working.

Service advisor didn't know anything about the update. I've yet to go through the settings to see what else changed.

Quote:

Originally Posted by 2SS Capt

On my car that feature is activated by pressing and holding the unlock button on the fob...

Ditto, always been hold the unlock button I believe

Quote:

Originally Posted by david_acm

Yeah same, I use it all the time but it wasn't working when they handed the keys back to me

Quote:

Originally Posted by len_eng

I got the update a week ago. The one thing I noticed is that unlike before it does not automatically lock the doors after a few seconds the way it used to. I have also not been able to locate where on the preferences menu you can turn it back on.

Quote:

Originally Posted by Jeffd1324

Noticed the same thing. It’s in there if you dig a little.

Quote:

Originally Posted by Kamero6

I got the update. I can confirm, the auto windows down doesn't work anymore.

Quote:

Originally Posted by arpad_m

Were you guys able to turn it back on somehow in the settings, or did GM remove the feature in this update altogether?

Here’s a contradiction data point, mine only reset the lighting color. All the features I’ve quoted everyone on above still work and are in my settings page still

Settings - Vehicle - Remote Lock, Unlock, and Start

Nothing reset there for me and nothings missing, tried holding the unlock button and the windows did go down

04-02-2025, 11:20 AM	#143
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,789 View My Garage	What if we disconnect power to the OBD2 port? Will that stop communications with any devices to the car/BCM/etc.? __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

04-04-2025, 12:34 PM	#147
Roddrz Drives: 2022 Camaro V6 2LT Convertible Join Date: Jul 2021 Location: Calgary, Alberta Posts: 86	The updates on the software progress are much appreciated TurboC3! For awareness, I've just included an additional security lock feature to the hood latch handle, from inside the vehicle, complementing (layering) many of the previously outlined solutions from many of the Camaro6 posts. Last edited by Roddrz; 04-04-2025 at 01:37 PM.

04-05-2025, 06:30 PM	#150
dfxrte Drives: 22 ZL1 M6 Join Date: Oct 2018 Location: GTA Posts: 404	seems its not worth it might cancel my appt, if you have other measures in place already __________________ 22 m6 zl1. cammed, headers, etc

04-02-2025, 12:00 PM	#146
TurboC3 Drives: 23 ZL1, 08 C6 vert, 70 Skylark GSX Join Date: Feb 2024 Location: Atlanta Posts: 54	Someone posted the wiring diagram, yes there are several possibles. Trying not to cut wires. But at this point, moving/hiding and adding a lock to OBD port is critical.

04-04-2025, 04:00 PM	#148
Jeffd1324 Drives: Camaro LT1, s10 blazer zr2 Join Date: Oct 2021 Location: Connecticut Posts: 12	Got the update today, as promised no issues with it being tuned. Would be nice if we found out what this was actually for.

04-05-2025, 04:38 PM	#149
len_eng Drives: 2024 Radiant Red 2SS, 1994 Z28, Join Date: Jan 2013 Location: Sharon, Ma Posts: 169	I got the update a week ago. The one thing I noticed is that unlike before it does not automatically lock the doors after a few seconds the way it used to. I have also not been able to locate where on the preferences menu you can turn it back on.

User Name		Remember Me?
Password