You are browsing camaro6 
09-01-2024, 08:15 AM
|
#1 |
 Drives: Camaro SS 2018 Join Date: Jun 2022
Location: Sweden
Posts: 14
|
Gen 6 automatic does not recognize P mode
Hi,
I have a gen 6 (6.2 L V8) with automatic gearbox. When entering P mode on the gear box the system doesn't recognize it being in P and hence alerts on it and the horn is signaled when closing the door and beep-signal from interior is on as warning. Most of the times it disappears/accepts when juggling the shift leveler back and forth for a while. Is there any contacts or sensors to be lubricated and/or adjusted? Or any other idea? Regards Joacim |
|
|
|
09-01-2024, 12:03 PM
|
#2 |
            
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,449
|
Hi Joacim, unfortunately this is a known shifter assembly issue with some potential workarounds you can try, check out these threads:
https://www.camaro6.com/forums/showthread.php?t=553306 https://www.camaro6.com/forums/showthread.php?t=556720 https://www.camaro6.com/forums/showthread.php?t=565056
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
09-02-2024, 11:04 AM
|
#3 |
|
Drives: Camaro SS 2018 Join Date: Jun 2022
Location: Sweden
Posts: 14
|
Thanks @arpad_m , will try the cheap WD-40 trick first
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
