[tecboy]

thanks....so all the plugs shown in your "harness pics" are covered in the 3 part #'s from Amazon?

[camaro104]

Originally Posted by tecboy

thanks....so all the plugs shown in your "harness pics" are covered in the 3 part #'s from Amazon?

Yes, you should have four harnesses two for amp two for harness.

[tecboy]

I got all 3 parts...These in fact contained both male and female 8 and 16 pin connectors......the third part acdelco..Came with all white wires..I noticed your pics of your harness have different colored wires..Did you remove and replace the wire leads on some of the plugs?

[camaro104]

Originally Posted by tecboy

I got all 3 parts...These in fact contained both male and female 8 and 16 pin connectors......the third part acdelco..Came with all white wires..I noticed your pics of your harness have different colored wires..Did you remove and replace the wire leads on some of the plugs?

Yes I did I also got the terminals. I tried matching the same color wires but that was hard so I kind of wing it. Another reason why it's taking so long....

[tecboy]

do you have a part #/source for terminals? How hard is it to take out existing and replace? I dont really care about matching colors...just would like to lengthen the ones that plug in to the amp...the ones that plug in to plug leading to speakers...those are plenty long enough

[camaro104]

Here's the latest, looks a mess but the tweeters and door speakers sounding great....

[CyberGuyPR]

These harnesses are evil. I played with them one more time and something still doesn't work properly. The pin layout is the same, great. However, in the pic below you can see the OEM Camaro connector on the left and the PT2641 from Amazon on the right. If you look carefully to the right side of reach, you will notice that the PT2641 has that guide molding ridge all the way to the right. The Camaro OEM connector is shifted 1/8" to the left. I could certainly dremel out the guide and I'm sure it will work, but that kind of defeats the purpose of keeping the OEM stuff intact. Maybe I just need to force the thing in there?

Tecboy, if you have some feedback on fitment, please post it here to make sure I'm not going crazy.

[tecboy]

I just started to play around with the plugs/pin outs...Camaro104 could answer for sure...the black plug PT2641 in your picture..is the same on plugged in to the amp in Camaro104 picture in the post above yours...he used the plug in question... but changed out the wiring leads

[camaro104]

I finally finish my install, it took me long enough. I must say it sounds awesome and I haven't installed the subs.

[CyberGuyPR]

Very nice. I am done wiring my harness and should be installing this weekend.

[camaro104]

The Unofficial finish product

[NY Andrew]

Any updates? Mines a little sloppy and it's been getting noise on the line and coming undone I guess because of the summer heat now and want to buy the 3 pieces but unsure if they gonna work right. Wanna get mine 100% right this time but ain't gonna pay someone to do it for hundreds. Shouldn't be that much to it considering I already know which lines I'm cut and tapped in to.