You are browsing camaro6 
07-31-2024, 03:20 PM
|
#1 |
|
Snackbar Tuning
Drives: 2023 SGM ZL1 Join Date: Oct 2016
Location: Florida
Posts: 1,518
|
Kong X Port For Sale
SOLD SOLD SOLD SOLD
$2750 shipped Venmo or Zelle This blower has a griptec hub installed, and a X port from Kong. It is a core meaning no bricks, sensors or gaskets. You would swap over all of these from your stock blower. Stock lid is included. Blower came of car at 15,000 miles, sent to Kong, then used for 2000 miles. Blower is in perfect condition. This is from a 2019 ZL1 but will fit any year. I mention the year because the pre 2022 blowers have an additional vacuum port for the bypass solenoid. The later years deleted this. If you run it on a 2022+ you just put a cap on that port.
__________________
GM Gen V Calibrator
Last edited by Megahurtz; 08-10-2024 at 02:03 PM. |
|
|
|
08-04-2024, 10:19 AM
|
#2 |
|
Snackbar Tuning
Drives: 2023 SGM ZL1 Join Date: Oct 2016
Location: Florida
Posts: 1,518
|
Forgot to mention, the hub comes with the pulley attachment screws/bolts, but they are not pictured above. Pulley not included but you can get one from Griptec.
__________________
GM Gen V Calibrator
|
|
|
|
|
08-04-2024, 06:11 PM
|
#3 |
 Drives: Camaro 2Ss Join Date: Oct 2019
Location: Ft Lauderdale
Posts: 97
|
I have bricks of someone needs to complete the blower
|
|
|
|
08-06-2024, 11:47 AM
|
#4 |
|
Snackbar Tuning
Drives: 2023 SGM ZL1 Join Date: Oct 2016
Location: Florida
Posts: 1,518
|
Sale pending. Will update if deal falls through.
__________________
GM Gen V Calibrator
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
