11-14-2022, 10:13 AM | #1 |
|
Finally Reached My Goal
I have been on this forum for like a decade and have had 3 different Camaros during that time. When this 6th Gen came out I new this would be the one. I bought this car 5 years ago, this is actually the longest car I have ever owned. This thing has truly reached every goal I have set for it.
Went 11.2 with just a tire Went 10s with boltons Went 9.6 with a cam added Went 9.0 with a 2650 & 15” conversion added And now has gone 8.84 at 156 with Holley Port injection on X85. This really is a great platform.
__________________
2017 ZL1 A10: 8.84 @ 156 PB
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
11-14-2022, 10:19 AM | #2 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: GA
Posts: 3,172
|
Great platform overall, just REALLY expensive to get to where you are. Cheaper to get there on other platforms. Kudos to achieving your goal!
|
11-14-2022, 10:25 AM | #3 |
|
Besides a 5.0 name another?
__________________
2017 ZL1 A10: 8.84 @ 156 PB
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
11-14-2022, 10:32 AM | #4 |
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
|
11-14-2022, 10:45 AM | #5 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,825
|
Nice Pass!!
Side note: Now that Port Injection has become more affordable, I think you can get a ZL1 into the 8's for less than some think. Kong X port- 2k ToohighPSI PI- 2500.00 with injectors Aux low side- 1200.00 upper and lower pulleys- 1k big gulp- 500.00 103mm tb- 600.00 flex sensor and E- 250.00 headers- 1000.00 drag pack- 3k for Welds Lagunas with tires. Comes in around 13,200.00. Let's just say for under 15k you should be able to get one in the 8's with basic weight reduction. Seats/exhaust. No longer need a cam since we have all the fuel with PI.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
11-14-2022, 10:53 AM | #6 |
|
I have been down these roads a million times. 11k in this car plus tuning went 9.0@151 or 152. How much for hellcat to do that. Show me proof and not a damn shop car that’s gutted.
__________________
2017 ZL1 A10: 8.84 @ 156 PB
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
11-14-2022, 10:57 AM | #7 |
|
[QUOTE=KingLT1;11252802]Nice Pass!!
Side note: Now that Port Injection has become more affordable, I think you can get a ZL1 into the 8's for less than some think. Kong X port- 2k ToohighPSI PI- 2500.00 with injectors Aux low side- 1200.00 upper and lower pulleys- 1k big gulp- 500.00 103mm tb- 600.00 flex sensor and E- 250.00 headers- 1000.00 drag pack- 3k for Welds Lagunas with tires. Comes in around 13,200.00. Let's just say for under 15k you should be able to get one in the 8's with basic weight reduction. Seats/exhaust. No longer need a cam since we have all the fuel with PI.[/QUOTE Go to a track and have real world experience. Besides shop cars like LMP, amp, and pray.
__________________
2017 ZL1 A10: 8.84 @ 156 PB
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
11-14-2022, 11:10 AM | #8 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,825
|
Damn...I was making a point in your favor. Lol
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
11-14-2022, 11:13 AM | #9 |
|
Ahhh my bad. Sorry brother, honestly. Took the message wrong as I was reading others as well.
__________________
2017 ZL1 A10: 8.84 @ 156 PB
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
11-14-2022, 11:39 AM | #10 |
Petro-sexual
|
Damn nice numbers for sure.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
11-14-2022, 12:45 PM | #11 |
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,097
|
Very Impressive my friend!
__________________
2022 M6 ZLE: Katech Standard Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation Kit
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild Catch Can Coated AR Headers + GESI UHO Cats + V Bands + AWE Touring + Magnaflow Center X + MSD Coils + Banks iDash + JMS Booster ALL the BMR Read End Goodies + BMR Motor Mounts + JRE Terminator Cam Package + Big Gulp + GMS High Flow Crash Bar DMS Front HX + Fender Tank + FIC 30's + APEX SM.10's + TOYO 305/345 R888R's = 775rwhp 815rwtq @E55 13.5psi |
11-14-2022, 01:03 PM | #12 | |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: GA
Posts: 3,172
|
Quote:
https://www.hellcat.org/threads/8-second-pass.254969/ Last edited by Z OH 6; 11-15-2022 at 04:00 AM. |
|
11-14-2022, 01:07 PM | #13 | |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: GA
Posts: 3,172
|
Quote:
But what are you using to control the Toohigh PSI port injection plates? Holley system is the way to go but its going to add a LOT of cost to this. You might be able to get away with MAF Fusion or Reflex Plus but that's not the preferred option unless you're just trying to pinch pennies. I do agree that as the port injection plates and controllers continue to drop in price, the gap will close on this platform considerably. Last edited by Z OH 6; 11-14-2022 at 01:23 PM. |
|
11-14-2022, 01:15 PM | #14 | |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,825
|
Quote:
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
|
|
|
Post Reply
|
|
|