03-12-2022, 10:16 AM | #1 |
PKG4U
|
Rear tire fitment on 19x12 wheel
Can I fit a 345/30/19 tire on the rear in a non-1le ZL1 without relocating the wire harness? I was planning on doing a 325/30/19 but may do more if possible without relocation. Thanks Camaro family.
Side note: these will be going on the Apex sm-10 anthracite due to ship out in about 2 weeks. Thanks on the recommendations for the group buy from everyone who did! Look forward to sharing pics of finished product in about 3 weeks!
__________________
2020 Camaro LT1. Bought 10/2020 | GM PERF. CAI | GM Muffler Delete (Performance Exhaust 4” tips). | SOLD 1/2022|
2018 ZL1 Summit White | Bought 1/2022 | PDR, Recaros, Carbon Dash, WeaponX Hx System, Apex SM-10 in ZLE fitment w/PS4S Mods after Warranty “Imma keep it stock” |
03-12-2022, 02:37 PM | #2 | |
Drives: 2023 ZL1 1LE Join Date: May 2018
Location: Naples
Posts: 105
|
Quote:
__________________
2023 BMW X4M Competition (Downpipes, Midpipes, Intake, Exhaust, Tune)
2023 ZL1 1LE BC Forged KXO5, 325/345 Toyo R888R, KPMF Satin Pearl Wrap, GT Haus Exhaust, Girodisc/Carbotech AX6, Race louvers. - Incoming Harrop 2650, Cam etc.. |
|
03-12-2022, 07:24 PM | #3 |
PKG4U
|
Oh wow. That simple.. okay thanks for the input. Mine is white as well and from a previous LT1 owner, your ride looks sick. Also wouldn’t mind haven’t a 3MC myself I bet that thing is sick
__________________
2020 Camaro LT1. Bought 10/2020 | GM PERF. CAI | GM Muffler Delete (Performance Exhaust 4” tips). | SOLD 1/2022|
2018 ZL1 Summit White | Bought 1/2022 | PDR, Recaros, Carbon Dash, WeaponX Hx System, Apex SM-10 in ZLE fitment w/PS4S Mods after Warranty “Imma keep it stock” |
03-12-2022, 07:57 PM | #4 |
Drives: 2016 Camaro SS Join Date: Oct 2021
Location: Michigan
Posts: 293
|
I run 19x12 with 335/30/19 and they have wore a hole in the inner fender liner where the harness would have been. I am thinking 345's might be a little much without a spacer. Will also depend on the offset of your wheels.
__________________
2016 Camaro 2SS 759whp 686wtq tuned by KingLt1
Procharger D1SC - Forged internals BTR stage 3 cam - Circle Stage 3 trans American Racing headers - Borla S-type |
03-12-2022, 11:02 PM | #5 |
Drives: 2023 ZL1 1LE Join Date: May 2018
Location: Naples
Posts: 105
|
Thanks Brother. I have owned multiple 1k HP Vipers/Zo6's/Hellcats over the years, what BMW has done with these X3M Comps is ridiculous. Everytime I get out of it I cant believe its an SUV. Dynos at over 500 AWP stock. Just put a piggyback tuner on it since tuning isn't available for the 22's yet. 700 hp 10 sec all wheel drive SUV. I just put 325's on the rear, straight hooks!
__________________
2023 BMW X4M Competition (Downpipes, Midpipes, Intake, Exhaust, Tune)
2023 ZL1 1LE BC Forged KXO5, 325/345 Toyo R888R, KPMF Satin Pearl Wrap, GT Haus Exhaust, Girodisc/Carbotech AX6, Race louvers. - Incoming Harrop 2650, Cam etc.. |
03-13-2022, 10:23 AM | #6 |
PKG4U
|
Et 41 offset in rear. Starting to realize a relocate is probably required if I want to go more than 325 in rear. I have some 5mm spacers I could use in rear but they aren’t bolt-on
__________________
2020 Camaro LT1. Bought 10/2020 | GM PERF. CAI | GM Muffler Delete (Performance Exhaust 4” tips). | SOLD 1/2022|
2018 ZL1 Summit White | Bought 1/2022 | PDR, Recaros, Carbon Dash, WeaponX Hx System, Apex SM-10 in ZLE fitment w/PS4S Mods after Warranty “Imma keep it stock” |
03-21-2022, 12:44 PM | #7 |
PKG4U
|
Wheels are awaiting install today. Pics to follow if all goes well. Went with 325/30 in rear to play it safe for now
__________________
2020 Camaro LT1. Bought 10/2020 | GM PERF. CAI | GM Muffler Delete (Performance Exhaust 4” tips). | SOLD 1/2022|
2018 ZL1 Summit White | Bought 1/2022 | PDR, Recaros, Carbon Dash, WeaponX Hx System, Apex SM-10 in ZLE fitment w/PS4S Mods after Warranty “Imma keep it stock” |
09-20-2022, 01:32 PM | #8 | |
Drives: '23 LT1 conv, '07 911 Turbo Join Date: Jun 2018
Location: Lexington, KY
Posts: 44
|
Quote:
Thanks |
|
|
|
Post Reply
|
|
|