01-24-2021, 12:05 PM | #1 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 914
|
Ready for some traction this year!
345/30R19 Nitto NT555RII drag radials should yield a little more traction this year.
Coming from 285/30R20 and 305/30R20 PS4S on stock wheels to 305/30R19 PS4S and 345/30R19 Nitto NT555RII on Apex ARC-8 ZLE fitment.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
01-24-2021, 12:21 PM | #2 |
Drives: 18 ZL1 mostly stock Join Date: Jan 2020
Location: NJ
Posts: 91
|
Nice!! I've heard good things about the R II's. I'm sure it will be a big difference coming from the PS4's. Post some pics when you get them on the car. I see your in NJ who is mounting them for you? I'm still trying to decide who to bring my Toyos to, they are only 315's but dont want my rims all scratched up by the dealer
__________________
07 LMB Z06 Cartek 4x heads and cam, ARH, Vararam, FAST 102, NW 102
18 ZL1 M6 MTI cam, FED heads, FBO's |
01-24-2021, 12:26 PM | #3 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 914
|
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
01-24-2021, 01:06 PM | #4 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Should hook nice from a roll
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
01-26-2021, 11:04 AM | #5 |
Drives: 2018 ZL1 Camaro 6M Red Hot Join Date: Aug 2013
Location: Cary, NC
Posts: 1,138
|
How well do these hook up on the road?
My biggest gripe about my ZL1 is how hard it is to get traction
__________________
People are a lot like slinky's: not very helpful most of the time, but they bring a smile to your face when pushed down the stairs...
|
01-26-2021, 11:10 AM | #6 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: GA
Posts: 3,278
|
My ZL1 hooks up amazingly well for its power level, about 800 crank HP. I had a Hellcat prior to my ZL1 and it wouldn't hook for nothing stock or modified. Nothing short of running a drag radial would get it to hook. My 800hp ZL1 hooks pretty good even on the stock size Goodyear Supercar 3 tires.
|
01-26-2021, 11:27 AM | #7 |
Used to own a ZL1
Drives: '16 Z06 Join Date: Apr 2020
Location: TX
Posts: 279
|
Why those over R888R?
|
01-26-2021, 11:29 AM | #8 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,799
|
Traction - the bane of all Gen 6 particularly with mods
__________________
'20 ZL1LE A10.
LME 390, E2650, FBO. 1116/967. 100 octane. 1.35/9.25/151 at 3500 ft. (only one pass so far). 15" conversion/Weld/MT ET Street R 325/50R15. Alky Twin 10+10 MAF, 100% meth. No dyno or ET. |
01-26-2021, 11:29 AM | #9 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 914
|
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
01-26-2021, 11:36 AM | #10 |
Drives: 2018 ZL1 Camaro 6M Red Hot Join Date: Aug 2013
Location: Cary, NC
Posts: 1,138
|
Mine is totally stock, but still struggles for traction at launch.
__________________
People are a lot like slinky's: not very helpful most of the time, but they bring a smile to your face when pushed down the stairs...
|
01-26-2021, 11:38 AM | #11 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: GA
Posts: 3,278
|
|
|
|
Post Reply
|
Thread Tools | |
|
|