You are browsing camaro6 
08-02-2019, 08:19 PM
|
#1 |
 
Drives: 2018 ZL1 Garnet Red Tintcoat A10 Join Date: Jan 2019
Location: NY
Posts: 537
|
HP tuner or SCT/BDX
What is the general consensus for tuner models. HPtuner with software or the SCT/BDX handheld device?
What are people using and what do people like? I am on the fence. I don't plan on getting deep into the engine at all. So far just bolt ons. Catback, intake, and soon to be headers. At the most I think my mods stop at a lower pulley swap. I don't want to get into fuel, transmission, or internal engine |
|
|
|
08-03-2019, 07:28 AM
|
#2 |
|
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,075
|
Even those mods (headers, new cats (?), pulley and other supporting mods (cooler thermostat with a pulley for example) will require a significant amount of tuning. The LT4 is not an easy engine to tune right. Use HP and take your time if you do it yourself. If you are uncertain, a shop is worth the investment. Just make sure they have experience with the LT4, it is not the same as the good old LS engines.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
|
|
|
|
08-03-2019, 07:42 AM
|
#3 |
|
Drives: 2018 ZL1 Garnet Red Tintcoat A10 Join Date: Jan 2019
Location: NY
Posts: 537
|
Yes I plan on a thermostat and possibly new plugs and wires. I just don't want to get to deep in the engine. I got a guy who is going to help me out with the tune if I go with HP. We just don't have a dyno. We are going to have to street tune. He has done several others and I am confident he will do a great job with mine. I want to be apart of the tune so I can learn more. Versus dropping it of at the local tune shop and picking it up when it's over.
|
|
|
|
|
08-03-2019, 08:35 AM
|
#4 |
|
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,075
|
A street tune is essential. Good job! You don’t need a shop if you have an experienced tuner or take the time to learn how to do it. Sounds like a good plan.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
|
|
|
|
08-03-2019, 11:47 AM
|
#5 |
    Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
Go HP, just in case the decide to do more in the future.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
