OW sensor simulator wiring. Need help

yourcustomcar · 10-25-2018, 01:28 PM

Hi all,
First post here at the forums. I'm working on a customer's 17 Camaro SS (6.2l) and he has deleted his catalytic converters and is obviously having some trouble codes being generated. I purchased some o2 sensor simulators to remedy the issue from magnumtuning.com , but the ones I purchased have to be hard wired in (not plug in). The new simulators have 4 wires (red power, black ground, then two sinsl wires- one black, one grey). Colors on the car's harness (before the extensions) are as follows:

Drivers Side:
Grey with White Stripe
Purple with Blue Stripe
Yellow with White Stripe
Purple with Blue Stripe

Passenger Side:
Purple with Green Stripe
Yellow with Blue Stripe
Purple with Blue Stripe
White with Brown Stripe

Can anyone help me out with telling me which wires of the simulators go where?

10-25-2018, 01:28 PM	#1
yourcustomcar Drives: 2017 Chevy Camaro SS Join Date: Oct 2018 Location: NC Posts: 1	OW sensor simulator wiring. Need help Hi all, First post here at the forums. I'm working on a customer's 17 Camaro SS (6.2l) and he has deleted his catalytic converters and is obviously having some trouble codes being generated. I purchased some o2 sensor simulators to remedy the issue from magnumtuning.com , but the ones I purchased have to be hard wired in (not plug in). The new simulators have 4 wires (red power, black ground, then two sinsl wires- one black, one grey). Colors on the car's harness (before the extensions) are as follows: Drivers Side: Grey with White Stripe Purple with Blue Stripe Yellow with White Stripe Purple with Blue Stripe Passenger Side: Purple with Green Stripe Yellow with Blue Stripe Purple with Blue Stripe White with Brown Stripe Can anyone help me out with telling me which wires of the simulators go where?

User Name		Remember Me?
Password