05-29-2018, 12:35 PM | #1 |
Drives: 2016 Camaro 2SS Join Date: Mar 2016
Location: Suffolk Long Island
Posts: 954
|
Weld wheel fitment
Anybody with 17x10 RTS on the rear can confirm i need to replace the LCA in the car on an SS?
__________________
2016 Hyper Blue 2SS A8,NPP,Moonroof
Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray |
05-29-2018, 03:15 PM | #2 |
Drives: 2017 ZL1 A10 Join Date: Nov 2009
Location: Pearland, TX
Posts: 465
|
My 17x10s fit with zero modifications. It's a super close fitment though with the rear Brembos.
|
05-29-2018, 05:42 PM | #3 |
Drives: 2017 Camaro 1SS Join Date: Aug 2016
Location: NH
Posts: 1,705
|
I have the Weld RTS in 17x10, high pad style with a listed backspace of 7.2", and have seen no clearance problems on my SS model with stock rear suspension parts.
|
05-29-2018, 09:10 PM | #4 |
Drives: 2016 Camaro 2SS Join Date: Mar 2016
Location: Suffolk Long Island
Posts: 954
|
Thanks for the replies I called Weld today and was told I had to change the LCA in the rear and was like WTF?
__________________
2016 Hyper Blue 2SS A8,NPP,Moonroof
Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray |
|
|
Post Reply
|
|
|