Reverse Light LED All-in-One Kit by Phastek Performance install Guide & Overview

Sledgehammer70 · 03-08-2017, 09:12 AM

Phastek Performance now offers a LED reverse light all in one kit that is pretty cool and avoids my original hacking to make it all work.

V8Addict · 03-09-2017, 08:04 AM

on backorder and no one else sells these yet

Alex00 · 03-09-2017, 09:27 AM

I was actually going to order up the "hacked" version and install this weekend but this looks much cleaner. Sure it's a few bucks more, but it looks much better. Thanks for the video and the heads up. Now just waiting for Phastek to get them back in stock.

Corner carver · 03-09-2017, 11:14 AM

Got my harness and bulbs from Gen5diy... Oem quality, plug and play harness (Oem connectors too)
They've had them for approximately a year now

tchowe · 03-09-2017, 02:03 PM

Already ordered the Gen5diy harness. Not too keen on the riveting into the car's body. Probably going to wait for this one to come back in stock.

Haole · 03-09-2017, 06:45 PM

I just put this on my build list on their site and have them sending me an email when they come in Stock. Seems easy enough to install from what I see on the video

Corner carver · 03-10-2017, 04:42 PM

Quote:

Originally Posted by tchowe

Already ordered the Gen5diy harness. Not too keen on the riveting into the car's body. Probably going to wait for this one to come back in stock.

I didn't like the idea of that either... I just played with the placement a bit, (not in the rain gutter and enough harness slack to pull the taillight out) then attached the resistor to the body with some good quality body tape. (3M)

Nookz · 03-13-2017, 01:22 AM

For those who don't want to wait or spend this amount of money.
I tried TonyNo's solution yesterday http://www.camaro6.com/forums/showpo...3&postcount=76 and it's working perfectly. No extra wiring etc. and almost no cost involved (about 2cents for both resistors

).

glamcem · 03-17-2017, 04:34 AM

Quote:

Originally Posted by Nookz

For those who don't want to wait or spend this amount of money.
I tried TonyNo's solution yesterday http://www.camaro6.com/forums/showpo...3&postcount=76 and it's working perfectly. No extra wiring etc. and almost no cost involved (about 2cents for both resistors

).

what is the solution? the links are broken

Nookz · 03-17-2017, 10:14 AM

Quote:

Originally Posted by glamcem

what is the solution? the links are broken

Get some of these resitors (I used 2.2kOHM), attach them to the contacts of the bulbs and plug them back in. No more ghosting.

MANNAXMAN · 03-17-2017, 11:13 AM

Quote:

Originally Posted by Nookz

For those who don't want to wait or spend this amount of money.
I tried TonyNo's solution yesterday http://www.camaro6.com/forums/showpo...3&postcount=76 and it's working perfectly. No extra wiring etc. and almost no cost involved (about 2cents for both resistors

).

Quote:

Originally Posted by Nookz

Get some of these resitors (I used 2.2kOHM), attach them to the contacts of the bulbs and plug them back in. No more ghosting.

TonyNo's pic showed a resistor attached to a bulb. Since the links to his pics aren't working, do you have any pictures of how the resistors are attached to the bulbs?

Nookz · 03-17-2017, 01:10 PM

Quote:

Originally Posted by MANNAXMAN

TonyNo's pic showed a resistor attached to a bulb. Since the links to his pics aren't working, do you have any pictures of how the resistors are attached to the bulbs?

With the bulb facing upwards, I've just wrapped the resistor around the left contacts on each side, connecting them.
If Tony hasn't replied by then, I could take a picture next weekend.

glamcem · 03-18-2017, 11:02 AM

Quote:

Originally Posted by Nookz

With the bulb facing upwards, I've just wrapped the resistor around the left contacts on each side, connecting them.
If Tony hasn't replied by then, I could take a picture next weekend.

thanks

keon718nyc · 03-19-2017, 12:48 PM

If its that simple with just those resistors i need that info too LOL

03-09-2017, 08:04 AM	#2
V8Addict Drives: 2016 2SS Join Date: Feb 2010 Location: So Calif Posts: 324	on backorder and no one else sells these yet __________________ 2016 Hyper Blue 2SS, A8, NPP, MRC

03-09-2017, 09:27 AM	#3
Alex00 Drives: 2017 Hyper Blue 2SS Join Date: Jan 2017 Location: Northern California Posts: 19	I was actually going to order up the "hacked" version and install this weekend but this looks much cleaner. Sure it's a few bucks more, but it looks much better. Thanks for the video and the heads up. Now just waiting for Phastek to get them back in stock.

03-09-2017, 11:14 AM	#4
Corner carver Drives: 2017 Camaro 2.0T RS Join Date: Jul 2016 Location: Ontario Posts: 1,827	Got my harness and bulbs from Gen5diy... Oem quality, plug and play harness (Oem connectors too) They've had them for approximately a year now

03-09-2017, 02:03 PM	#5
tchowe Drives: 2017 V6 Camaro RS Join Date: Feb 2016 Location: Atlanta, GA Posts: 106	Already ordered the Gen5diy harness. Not too keen on the riveting into the car's body. Probably going to wait for this one to come back in stock.

03-09-2017, 06:45 PM	#6
Haole 2017 SS Drives: 2017 Summit White 2SS Join Date: Feb 2009 Location: Hawaii Posts: 1,363 View My Garage	I just put this on my build list on their site and have them sending me an email when they come in Stock. Seems easy enough to install from what I see on the video

03-13-2017, 01:22 AM	#8
Nookz Drives: 2016 Camaro SS Join Date: Feb 2017 Location: Dubai Posts: 71	For those who don't want to wait or spend this amount of money. I tried TonyNo's solution yesterday http://www.camaro6.com/forums/showpo...3&postcount=76 and it's working perfectly. No extra wiring etc. and almost no cost involved (about 2cents for both resistors ).

03-19-2017, 12:48 PM	#14
keon718nyc Drives: Challenger SP Shaker/Arcadia Denali Join Date: Jan 2016 Location: New York City Posts: 1,928	If its that simple with just those resistors i need that info too LOL

User Name		Remember Me?
Password