Roto-fab CAI: More info and reviews!

Roto-fab 1 · 10-13-2016, 10:19 PM

This information can be found in another thread, but I feel it is important that everyone knows the qualities that put Roto-fab ahead of the pack:

The Roto-fab CAI has some great qualities. We package a huge filter into an air box that was custom fabricated to fit the 2016 Camaro with precision. All of our tooling was designed in-house, and every feature was relentlessly refined until we were satisfied with the performance, appearance, quality, and fitment of the system. We spent 8 months and thousands of hours making this system the best CAI available for the 2016 Camaro SS.

Aside from the benefits that can be observed visually, many hours, days, and months went into the fine-tuning of our mass air flow sensor housing. We mechanically tuned this system to perform great with the stock Camaro calibration, or with an ECM tune! JDP Motorsports tested this intake on an otherwise stock Camaro SS, and gained 12 HP, + 13 ft/lb tq. Which, to my knowledge, is the highest HP gain of a 2016 Camaro CAI verified by a 3rd party.

Our CAI is a high quality system that looks good, performs great, and fits your car with precision. And it installs with ease, with the help of our full-page instruction booklet with colored illustrations.

Below are some pictures of our system, and a dyno sheet.

Roto-fab CAI, dry filter, sound tube delete system, red logo

Roto-fab CAI, oiled filter, sound tube acommodation, etched logo

Dyno sheet, Roto-fab CAI vs. stock intake system. Roto-fab gains 12 HP and 13 ft/lb!

Components of the Roto-fab CAI, many of which are hand crafted at our shop! All the way down to plastic trimming and final cleaning.

As I have time, I will post reviews of our 2016 CAI as well as some of our other offerings. I hope this was helpful. Thanks for your interest, and I would be glad to assist further if you have any questions.

Michael

Homer2 · 10-13-2016, 10:21 PM

Is there Canadian Distribution?

Roto-fab 1 · 10-13-2016, 10:36 PM

Absolutely! Davenport Motorsports is a stocking dealer of ours.

Thanks for your interest, and also for using our CAI on your 2014. Could you share some thoughts on your experience with Roto-fab?

Thanks again,
Michael

Homer2 · 10-13-2016, 10:41 PM

Thanks.. Ill check with them - ordering a 50th and want to get my supplies ready.

As for the install on the current 2014 V6... I took the dry filter, white box option.. looked good. Easy install. As far as how it performed, it certainly changed the front end sound - but its a commuter car with 90,000 miles on it. No issues - in fact I never even bothered cleaning it. Seems the fit to the hood was tight and not much got in there.. and what did was trapped.

No issues means Ill be putting yours on the '17 also.

Homer2 · 10-13-2016, 10:45 PM

Sigh.. Davenports is half a country away from me ( anything closer to Ontario) and their website stops at 2015 Camaro accessories shown.

Eric SS · 10-13-2016, 11:27 PM

I have a rotofab in my SS Sedan and love it. it's definitely the cream of the crop. I'll definitely be getting one of these for my Camaro shortly!

enzia35 · 10-14-2016, 02:25 AM

These threads ain't making it any easier for my "no mods for a while" rule.

Roto-fab 1 · 10-14-2016, 02:31 AM

Quote:

Originally Posted by enzia35

These threads ain't making it any easier for my "no mods for a while" rule.

I'll be happy to assist you when the time comes! Thanks for your interest in our system, and have a great night!

Michael

BradfordCamaro · 10-14-2016, 02:36 AM

Quote:

Originally Posted by Homer2

Sigh.. Davenports is half a country away from me ( anything closer to Ontario) and their website stops at 2015 Camaro accessories shown.

Order in U.S. and Ship to Niagara falls.
Waiting for Black Friday sales.....

Homer2 · 10-14-2016, 12:08 PM

I have an exporter address in N Falls also..my first choice is to shop Canadian but I did forget about Black Friday... hmmmm..

PRAY · 10-14-2016, 07:46 PM

Can you order the kit without the elbow if you are running a PD blower? Like if you were throwing LT4 kit on your car.

BradfordCamaro · 10-14-2016, 08:06 PM

I'm sure this info is floating around somewhere...
Why does the Oiled filter make a little more HP?

Roto-fab 1 · 10-14-2016, 08:20 PM

Quote:

Originally Posted by PRAY

Can you order the kit without the elbow if you are running a PD blower? Like if you were throwing LT4 kit on your car.

Our supercharged partial kit is not yet an advertised product, but if you call our office at (260) 375-4480, we will make sure you are taken care of.

The Roto-fab CAI has gained 40+ hp over the stock intake on multiple supercharged LT1 builds.

Thanks for your interest, do have a supercharger installed?

Michael

BowtieRocket · 10-14-2016, 11:55 PM

Dyno numbers look a bit high for a "stock" camaro...makes me skeptical of the over all dyno

10-13-2016, 10:19 PM	#1
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	Roto-fab CAI: More info and reviews! This information can be found in another thread, but I feel it is important that everyone knows the qualities that put Roto-fab ahead of the pack: The Roto-fab CAI has some great qualities. We package a huge filter into an air box that was custom fabricated to fit the 2016 Camaro with precision. All of our tooling was designed in-house, and every feature was relentlessly refined until we were satisfied with the performance, appearance, quality, and fitment of the system. We spent 8 months and thousands of hours making this system the best CAI available for the 2016 Camaro SS. Aside from the benefits that can be observed visually, many hours, days, and months went into the fine-tuning of our mass air flow sensor housing. We mechanically tuned this system to perform great with the stock Camaro calibration, or with an ECM tune! JDP Motorsports tested this intake on an otherwise stock Camaro SS, and gained 12 HP, + 13 ft/lb tq. Which, to my knowledge, is the highest HP gain of a 2016 Camaro CAI verified by a 3rd party. Our CAI is a high quality system that looks good, performs great, and fits your car with precision. And it installs with ease, with the help of our full-page instruction booklet with colored illustrations. Below are some pictures of our system, and a dyno sheet. Roto-fab CAI, dry filter, sound tube delete system, red logo Roto-fab CAI, oiled filter, sound tube acommodation, etched logo Dyno sheet, Roto-fab CAI vs. stock intake system. Roto-fab gains 12 HP and 13 ft/lb! Components of the Roto-fab CAI, many of which are hand crafted at our shop! All the way down to plastic trimming and final cleaning. As I have time, I will post reviews of our 2016 CAI as well as some of our other offerings. I hope this was helpful. Thanks for your interest, and I would be glad to assist further if you have any questions. Michael

10-13-2016, 10:21 PM	#2
Homer2 Drives: 50th Anni.. coming home 11/01 Join Date: Jul 2014 Location: Toronto. Ontario Posts: 1,640	Is there Canadian Distribution? __________________ ##################### Built Sept 16/2016 - #2681 of 5955. She came home with me 11/01/16. 50th Anni, 2SS, A8, NPP, NGM Rock Guards, Footwell Lighting, Black Bow Ties, Street Warrior Rotors and Pads, Ceramic Pro, 3M PPF, Oracle Ghosted Side Markers, Kooks 2" headers w/hi flow cats. GPI Stage 1 Cam installed at 305,000 kms.

10-13-2016, 10:41 PM	#4
Homer2 Drives: 50th Anni.. coming home 11/01 Join Date: Jul 2014 Location: Toronto. Ontario Posts: 1,640	Thanks.. Ill check with them - ordering a 50th and want to get my supplies ready. As for the install on the current 2014 V6... I took the dry filter, white box option.. looked good. Easy install. As far as how it performed, it certainly changed the front end sound - but its a commuter car with 90,000 miles on it. No issues - in fact I never even bothered cleaning it. Seems the fit to the hood was tight and not much got in there.. and what did was trapped. No issues means Ill be putting yours on the '17 also. __________________ ##################### Built Sept 16/2016 - #2681 of 5955. She came home with me 11/01/16. 50th Anni, 2SS, A8, NPP, NGM Rock Guards, Footwell Lighting, Black Bow Ties, Street Warrior Rotors and Pads, Ceramic Pro, 3M PPF, Oracle Ghosted Side Markers, Kooks 2" headers w/hi flow cats. GPI Stage 1 Cam installed at 305,000 kms.

10-13-2016, 10:45 PM	#5
Homer2 Drives: 50th Anni.. coming home 11/01 Join Date: Jul 2014 Location: Toronto. Ontario Posts: 1,640	Sigh.. Davenports is half a country away from me ( anything closer to Ontario) and their website stops at 2015 Camaro accessories shown. __________________ ##################### Built Sept 16/2016 - #2681 of 5955. She came home with me 11/01/16. 50th Anni, 2SS, A8, NPP, NGM Rock Guards, Footwell Lighting, Black Bow Ties, Street Warrior Rotors and Pads, Ceramic Pro, 3M PPF, Oracle Ghosted Side Markers, Kooks 2" headers w/hi flow cats. GPI Stage 1 Cam installed at 305,000 kms.

10-13-2016, 11:27 PM	#6
Eric SS #becauseracecar Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015 Location: Phoenix Posts: 2,959	I have a rotofab in my SS Sedan and love it. it's definitely the cream of the crop. I'll definitely be getting one of these for my Camaro shortly! Last edited by Eric SS; 10-14-2016 at 11:28 AM.

10-13-2016, 10:36 PM	#3
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	Absolutely! Davenport Motorsports is a stocking dealer of ours. Thanks for your interest, and also for using our CAI on your 2014. Could you share some thoughts on your experience with Roto-fab? Thanks again, Michael

10-14-2016, 02:25 AM	#7
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,449	These threads ain't making it any easier for my "no mods for a while" rule. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

10-14-2016, 12:08 PM	#10
Homer2 Drives: 50th Anni.. coming home 11/01 Join Date: Jul 2014 Location: Toronto. Ontario Posts: 1,640	I have an exporter address in N Falls also..my first choice is to shop Canadian but I did forget about Black Friday... hmmmm.. __________________ ##################### Built Sept 16/2016 - #2681 of 5955. She came home with me 11/01/16. 50th Anni, 2SS, A8, NPP, NGM Rock Guards, Footwell Lighting, Black Bow Ties, Street Warrior Rotors and Pads, Ceramic Pro, 3M PPF, Oracle Ghosted Side Markers, Kooks 2" headers w/hi flow cats. GPI Stage 1 Cam installed at 305,000 kms.

10-14-2016, 07:46 PM	#11
PRAY Drives: 2016 2SS Join Date: Jul 2016 Location: Sanford NC Posts: 2,766	Can you order the kit without the elbow if you are running a PD blower? Like if you were throwing LT4 kit on your car. __________________ 2016 2SS. H/C SBE 1.37 60ft, 6.36@109.49, 9.97@136+. Nuff Said.

10-14-2016, 08:06 PM	#12
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	I'm sure this info is floating around somewhere... Why does the Oiled filter make a little more HP? __________________

10-14-2016, 11:55 PM	#14
BowtieRocket Drives: 2016 Camaro 2SS- M6 Join Date: Sep 2016 Location: Albuquerque Posts: 1,133 View My Garage	Dyno numbers look a bit high for a "stock" camaro...makes me skeptical of the over all dyno __________________ 2016 Camaro 2SS M6- Garage

User Name		Remember Me?
Password