09-05-2017, 03:50 PM | #15 |
Drives: 17 ZL1 4300 03/16/2017 Join Date: Dec 2016
Location: Kansas
Posts: 112
|
I bought in March with delivery in May. Not a lot of info when I ordered but I will add these. Have run a best of 11.339 @ 124.96 (3100 DA) with the tires and wheels you see and a Roto-Fab dry CAI. Wheels are Weld 77HB7095N67A (5X120, 6.7 BS, 37mm 0ffset, High Pad) and tires are MT Street R 305/45R17.
Only mean to throw out another real world example. I have the MT Sportsman skinnies in the garage and the matching wheels for the front ordered. Good luck.
__________________
2017 ZL1 Coupe, MBM, A10, PDR, CF Hood Insert, ZL1 matts, 50th Anv. Indoor Cover
Last edited by wanab; 09-05-2017 at 04:27 PM. |
09-05-2017, 04:53 PM | #16 | |
Drives: 2017 White ZL1 A10 Join Date: Mar 2016
Location: SoCal
Posts: 171
|
Quote:
I was thinking on getting the 15" conversion but I had real good luck with Street R's on my Hellcat with a 305/45/18 managed a 1.4 60ft
__________________
2018 Trackhawk
2017 ZL1 A10 2017 CTSV 2016 GT350 2015 Hellcat Challeger |
|
06-03-2019, 07:14 PM | #17 |
Drives: 2017 A10 ZL1 Join Date: Jul 2011
Location: CO
Posts: 52
|
I'd like to bump this thread up and get some more people with 17s!
|
06-03-2019, 07:35 PM | #18 |
Here is mine with a 17x9.5 and 305/45-17 M/T ET Street R
__________________
2018 ZL1-NFG-A10
New Iron L8T 9.32 147MPH |
|
06-03-2019, 08:10 PM | #19 |
Drives: 18 ZL1 A10 & 18 2500HD Duramax Join Date: Oct 2012
Location: Chicago, IL
Posts: 733
|
17” Race stars
__________________
Procharged 2018 ZL1 A10
2018 2500HD Duramax |
06-03-2019, 10:07 PM | #20 |
Drives: 2018 ZL1 2015 1SS 1LE Join Date: May 2013
Location: North Eastern Michigan
Posts: 772
|
What’s the width and offset? I have a set of Racestars 17x10.5 with a 32 offset from my 5th gen wondering if they will fit my ZL1.
__________________
2018 ZL1 2015 1SS 1LE Stock...ish |
06-04-2019, 03:30 AM | #21 |
Drives: 18 ZL1 A10 & 18 2500HD Duramax Join Date: Oct 2012
Location: Chicago, IL
Posts: 733
|
17" x 10.5" and I’m not sure about the offset.
__________________
Procharged 2018 ZL1 A10
2018 2500HD Duramax |
06-04-2019, 11:27 AM | #22 |
|
if you hot lap with 17s the discs can expand and touch the rims. Cool down time prevents this mostly.
__________________
"Democracy Dies in Darkness" |
06-04-2019, 07:13 PM | #23 |
Drives: 2017 Camero ZL1 Join Date: Nov 2015
Location: Texas
Posts: 130
|
Weld S71 20x7 fronts and 17x10.5 rears. 17s fit fine in the rear.
__________________
2017 ZL1 A10
Dyno/Quarter Mile/Dragy 9.71@141.2 MPH so far. 2007 Z06 H/C/I/E Half Mile - 169 MPH. Sold. |
06-04-2019, 08:45 PM | #24 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,364
|
What’s the smallest regular size wheel you can fit upfront ?
17x7? What back spacing ? And tire size ? I bought race star 17x9.5 +20 305/45/17 for the rear |
10-27-2020, 01:22 AM | #25 |
Drives: 2019 Chevrolet Camaro zl1 Join Date: Mar 2019
Location: Alberta Canada
Posts: 3
|
how do these 17inch welds get balanced? Look like there is hardly any room between the caliper and rim.
|
10-27-2020, 02:32 AM | #26 |
Drives: 2017 ZL1 A10 Join Date: Aug 2009
Location: Dubai
Posts: 1,250
|
I run Forgestar 18" with 305/40 Mickey Thompson's.
Ahmad
__________________
2017 ZL1 A10 SW (SOLD)
Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER. |
10-27-2020, 07:48 AM | #27 | |
Drives: 2017 ZL1 Join Date: Jul 2017
Location: Central Kentucky
Posts: 72
|
Quote:
I'm running a 17x10 Weld single beadlock setup on mine. My wheel/tire company used standard stick on balancing weights. They barely clear my calipers. One sheet of printer paper will fit between the weights and calipers but has some resistance to being pulled out I don't have a picture available with the Welds on the car, sorry. I added a couple of pictures to explain the the custom built transmission sitting there next the the Welds. I had an issue, LOL . |
|
|
|
Post Reply
|
|
|