06-25-2022, 03:06 PM | #1 |
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 437
|
HUD display vibration?
I've noticed the HUD vibrates under certain conditions while driving. Over bumps, the Bose stereo is playing loud or even under certain exhaust parts under throttle. I've also noticed, that the display is slightly off level.
I know there has been a thread regarding this as far as Gen 6's go, but there was never any resolve for it. I can't be the only one with these issues obviously. So does anyone else with a Z have these issues and has anyone resolved part, or all of it? Link for reference: https://www.camaro6.com/forums/showthread.php?t=452518
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ |
06-25-2022, 03:46 PM | #2 |
Drives: 2022 ZL1 Join Date: Aug 2013
Location: Houston TX
Posts: 118
|
I've had HUD in 2 of my Corvettes and never had a vibration problem but my C6 was slightly tilted (very slightly). Almost sounds like the piece that projects it to the windshield is loose.
|
06-25-2022, 03:54 PM | #3 | |
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 437
|
Quote:
Edit: it appears the windshield has to come out before you even touch the dash. Then you have to rip the dash apart and THEN you can get in there to investigate. How annoying.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ Last edited by ZLRob; 06-25-2022 at 04:20 PM. |
|
06-25-2022, 04:32 PM | #4 |
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
Yeah my 18 ZL1 and my 21 ZL1 have no vibration in any condition.
|
06-25-2022, 04:56 PM | #5 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,625
|
No vibration here, but the HUD is very slightly tilted. I've gotten used to it.
2019+ software already allows rotating the HUD image.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
06-25-2022, 06:29 PM | #6 |
Drives: CHEVROLET CORVETTE Join Date: Feb 2021
Location: SWFL
Posts: 513
|
That sucks and it looks like out of warranty. Six Vettes and four Camaro's and no HUD issues.
|
06-25-2022, 06:30 PM | #7 |
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
|
06-25-2022, 09:26 PM | #8 |
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 437
|
Where is that on HPTuners? Or is that something that is accessible via scan tool?
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ |
06-25-2022, 10:58 PM | #9 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,625
|
Quote:
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
06-26-2022, 01:29 AM | #10 |
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 437
|
Ah man, that sucks. I was really hoping there was a way to adjust it, because it's not totally level. It's a little annoying. Oh well I guess.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ |
06-26-2022, 01:44 AM | #11 |
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,032
|
No HUD vibration issues in my 2020 2SS... Sounds like something is loose somewhere...
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting
Added after delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph... |
06-26-2022, 10:41 PM | #12 |
Drives: 2003 Monte Carlo SS SLP, 2022 ZL1 Join Date: Aug 2021
Location: Los Angeles, CA
Posts: 486
|
|
|
|
Post Reply
|
|
|