06-12-2021, 07:17 PM | #1 |
Looking for 12v ignition source under dash
2021 Camaro 3LT RS. I'm looking for a 12v power source under the dash for hooking up a curb alert.
There is a component just above the hood release, number 13535990. It has 7 harnesses plugged in. White, Blue, Green Black Brown Pink and Gray. Does anyone know what this is?
__________________
My past toys.
1972 Capri V8-300hp 1976 Corvette 1962 Corvette 2009 Sebring HT Conv. 2018 Camaro 1LT |
|
06-13-2021, 12:25 PM | #2 |
Drives: 2019 Camaro 2SS Join Date: Jan 2019
Location: kcmo
Posts: 49
|
yep!!! i do 12v installation....... green plug........ purple/black is ign purple/yellow is accy
hope this helps |
06-14-2021, 07:39 PM | #3 | |
Quote:
What component is this?
__________________
My past toys.
1972 Capri V8-300hp 1976 Corvette 1962 Corvette 2009 Sebring HT Conv. 2018 Camaro 1LT |
||
06-19-2021, 02:30 AM | #4 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
What is the difference between ignition and accessory power source? I though an ignition power source is the equivalent to a switched power source - at least in the automatic.
__________________
Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it
Mosaic black 2018 Camaro 2SS A8 (sold) |
06-19-2021, 02:16 PM | #5 |
It is my understanding that Ignition will only have voltage when the car is running.
__________________
My past toys.
1972 Capri V8-300hp 1976 Corvette 1962 Corvette 2009 Sebring HT Conv. 2018 Camaro 1LT |
|
06-19-2021, 07:05 PM | #6 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
It's definitely not that. An ignition power source is otherwise known as a switched power source. It is on when you press the start engine button without pressing the brake.
By accessory power source, do you mean retained accessory power source, which is a wire that retains power after engine shutdown for about 10 mins or until a door is opened? If that is the case, can someone point me towards a wire, preferably in the passenger footwell that provides retained accessory power? I am planning to remove the passenger kick panel in order to connect an accessory to the radio control module and I need this accessory to remain on for as long as the radio is on, after I shut down the engine. One of the wires on the connectors that connect to the radio control module should definitely be a retained accessory source. Anyone knows which wire?
__________________
Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it
Mosaic black 2018 Camaro 2SS A8 (sold) Last edited by MakCamaro; 06-19-2021 at 07:19 PM. |
07-18-2021, 10:02 AM | #7 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
Don't know if you still need help but maybe this helps if you haven't found already https://www.camaro6.com/forums/showthread.php?t=523536
|
07-18-2021, 10:12 AM | #8 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
I 've seen this thread, thanks for posting though. I decided to tap into the purple wire that goes to the cigarette lighter under the center console. I was looking for a retained accessory power source and the cigarette lighter wire is exactly what I need, as it retains power after engine shutdown for about 10 mins or until a door is opened.
__________________
Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it
Mosaic black 2018 Camaro 2SS A8 (sold) |
|
|
Post Reply
|
|
|