[Adampau123]

Originally Posted by cooper1965

I have no clue what the "RPM kit" is, but did you put power to the wire you placed?

The rpm motor sports flex fuel kit. And yes that is the wire coming off the pig tail for the flexfuel sensor to get signal from the ecu.

[Adampau123]

Originally Posted by cooper1965

Ughhh....I have warned people several times about that company's kit....
I have also tested their pin location's , and talked about the results.... It just pisses me off that you are now a victim of miss-information, and purchased a faulty product...Costing you more money and time...It is likely you provided power to a pin that should not have power.

Yup :/ and now really don't know what to.. found the ecu from rock auto and eBay for about 170 but I'm sure the dealership would have to flash it to the car.. I work at a Hyundai dealership and maybe by some miracle someone has a device that could flash it but I doubt it.

[Zzsteve]

Unplug, and reconnect the plug at the pcm. Maybe it wasn't in all the way, make sure non of the other pina pushed out when you had the plug apart. Just double check everything, lots of small parts in those plugs

[Adampau123]

Connector was not completely fastened down lol car running back to the way is was!! Thanks for the support guys!

[Evil-Bee-NH]

Happy to hear it's back to running normal again.

[vaspen]

So now I just need to wait on h.p for the support for e85 ?
Zzp- any chance the ats kit will work just need to pin differently ? Or where to buy the kit sorry if these have already been answered already:p

[ChicagoTommy]

Originally Posted by vaspen

So now I just need to wait on h.p for the support for e85 ?
Zzp- any chance the ats kit will work just need to pin differently ? Or where to buy the kit sorry if these have already been answered already:p

Yes, you need to wait for HPTuners to update their software, or go with Vtuner. Those are currently the only 2 options to use 'flex fuel'. You could always just tune for a single fuel mixture like 50% E85 and 50% 93, and not even use the sensor. ZZP's ATS kit won't work due to the same reason none of the other kits work, the PCM needs the programming corrected/updated to properly enable the Ethanol tables..

[Zzsteve]

Originally Posted by vaspen

So now I just need to wait on h.p for the support for e85 ?
Zzp- any chance the ats kit will work just need to pin differently ? Or where to buy the kit sorry if these have already been answered already:p

like others are saying, its not a pin issue, its a coding issue. eventually some day, if we are lucky, HPT will get off their butts, and fix that for us!

[ChicagoTommy]

Originally Posted by Zzsteve

like others are saying, its not a pin issue, its a coding issue. eventually some day, if we are lucky, HPT will get off their butts, and fix that for us!

Unfortunately they won't do anything about it until enough people contact them and let them know there is an issue. HPT doesn't monitor this forum, so I encourage everyone to either register on their forum, or email them directly asking for this problem to be resolved! We really need EVERYONE to pitch in and contact HPT!!! The squeaky wheel gets the grease!

[ChicagoTommy]

Here is the link to their forum.

https://www.hptuners.com/forum/

If you already own a cable, open a ticket from your HPT dashboard.

[15CamaroV6]

in case i missed it. zzsteve you guys have the 11.97 camaro and the video says it has e85. what does e85 actually mean if you guys cant tune for it?

[Evil-Bee-NH]

It was running what amounted to E47 according to the owner.

[6th_gen_gino]

Any word from hptuners ?

[ChicagoTommy]

Originally Posted by 6th_gen_gino

Any word from hptuners ?

Did you email them or open a ticket through their support?

I'm not kidding when I say EVERYONE needs to register to their forum and also make support tickets! That is the only way to get them to fix the issue! The squeaky wheel gets the