03-31-2017, 10:20 AM | #1 |
50th Anniversary Vert
|
Grinding noise when slowing...
I had 5th gen ZL1 wheels installed (kept aftermarket tires from my Vossens). Had new red Monster lugs installed too.
I also had ceramic pads installed about 6 weeks back. I am getting a rough grinding sound when coming to a stop. I checked for tire rub, have enough caliper clearance. Any other things to check?
__________________
|
03-31-2017, 10:33 AM | #2 | |
Drives: 2019 Silverado Z71 6.2L A10 Join Date: Mar 2017
Location: Grapevine
Posts: 2,075
|
Quote:
__________________
Current ride
2019 Silverado Z71 LTZ 6.2L L87 425hp A10, 4 inch BDS Lift with Fox Factory Race 2.5 Coilovers, Borla Cat back (15HP bump), BFG KM3's 33's. Past Rides 2017 M6 Camaro ZL1 Hyper Blue 2016 M6 GT350 White with blue strips 2014 M6 Mustang GT Premium Track Pack Ruby Red 2012 M6 M3 Melbourne Red Metallic |
|
03-31-2017, 11:08 AM | #3 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
Did you go thru the pad bedding process on the new pads?
|
03-31-2017, 02:58 PM | #4 |
50th Anniversary Vert
|
I did go through the bedding process, not sure if I did it right.
A few more observations: 1) I hear the noise when slowing without braking. 2) I can kinda feel the grinding through the steering wheel, though that may be my imagination.
__________________
|
04-01-2017, 08:11 AM | #5 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
I would get the car up on jackstands on all 4 wheels and spin each wheel by hand to see if you can hear the noise if it was me.
|
04-02-2017, 08:23 PM | #6 |
Drives: 2017 camaro ss Join Date: Jan 2017
Location: Miami
Posts: 264
|
It could be tire noise.
|
04-06-2017, 11:25 AM | #7 |
50th Anniversary Vert
|
Dealer checked it out today, said its the ceramics. Said they make a noise when slowing even when not actively applying brakes.
__________________
|
04-06-2017, 11:28 AM | #8 |
Drives: 2017 ZL1 Join Date: Oct 2016
Location: Ny
Posts: 859
|
Look for gouging on the rotors - inside and out. a small line will indicate a rock or something may be stuck in there - this happened to me once.
You can also do a hard stop or two. If its a small rock chip it'll probably come loose/break off.
__________________
My Car Blog and mods. Previous Chevys: 2016 2ss, 2015 C7 z51, 2004 C5 Z06
|
04-06-2017, 11:43 AM | #9 |
50th Anniversary Vert
|
Dealer checked, said the rear right had a rock at one time, but didnt see anything.
__________________
|
04-06-2017, 07:30 PM | #10 |
Drives: 2017 ZL1 Join Date: Oct 2016
Location: Ny
Posts: 859
|
probably a little shard left in there. just do some hard braking action.
__________________
My Car Blog and mods. Previous Chevys: 2016 2ss, 2015 C7 z51, 2004 C5 Z06
|
|
|
Post Reply
|
|
|