03-10-2017, 08:28 AM | #1 |
Drives: 2017 ZL1 Join Date: Oct 2016
Location: Ny
Posts: 859
|
TPMS install 13598787
Does anyone know the inch-lbs required for this sensor (aftermarket rim). 35 in-lbs maybe? Any install video/manual available? Thanks!
__________________
My Car Blog and mods. Previous Chevys: 2016 2ss, 2015 C7 z51, 2004 C5 Z06
|
03-10-2017, 08:45 AM | #2 |
Drives: 6th. Gen ZL1 Join Date: Jan 2017
Location: Texas
Posts: 424
|
The OEM sensors i have seen have the torque value printed on them. If they do not, i would torque them to 40 inch lbs. Make sure the body of the sensor lays flat against the barrel of the wheel.
|
03-10-2017, 09:38 AM | #3 |
Drives: 2017 ZL1 Join Date: Oct 2016
Location: Ny
Posts: 859
|
Ok. I didnt see anything written on them..
__________________
My Car Blog and mods. Previous Chevys: 2016 2ss, 2015 C7 z51, 2004 C5 Z06
|
03-15-2017, 11:55 AM | #4 |
Drives: 2017 ZL1 Join Date: Oct 2016
Location: Ny
Posts: 859
|
Follow up question... when I ordered 13598787 off of Amazon, it didnt include the outer stem nut. Does anyone know a part # for that? I could only find a maintenance kit with stem/cap etc.
The 13598787 did come with the cap and valve already.
__________________
My Car Blog and mods. Previous Chevys: 2016 2ss, 2015 C7 z51, 2004 C5 Z06
|
03-16-2017, 10:51 AM | #5 |
Drives: 2016 SS Camaro Join Date: Jul 2016
Location: maryland
Posts: 42
|
I got that same set from Amazon and I went to Advance Auto and bought this kit, It works perfect.
VDO Continental TPMS Service Kit Part No. SE54190 |
03-16-2017, 04:43 PM | #6 |
Drives: 2017 ZL1 Join Date: Oct 2016
Location: Ny
Posts: 859
|
Oh, wish I saw this a yesterday! I ordered the nuts from the dealer - $4 each.
__________________
My Car Blog and mods. Previous Chevys: 2016 2ss, 2015 C7 z51, 2004 C5 Z06
|
03-17-2017, 02:12 PM | #7 |
Drives: 2017 ZL1 Join Date: Oct 2016
Location: Ny
Posts: 859
|
Just a follow up, the gm part # is 13581557 " TPMS Sensor Valve" and it was $4 at the dealer
http://www.gmpartsdirect.com/oe-gm/13581557 ($2.37 here) Also the service dept told me the torque value is 89 in-lbs.. seems a little high. But I verified with him it was for the 16 camaro. Anyone have a service manual?!
__________________
My Car Blog and mods. Previous Chevys: 2016 2ss, 2015 C7 z51, 2004 C5 Z06
|
10-08-2019, 04:32 AM | #8 | |
Quote:
__________________
1967 Base 327 - numbers matching 10C car - (TruBlu - Marina Blue inside and out, still own)
1986 Base V6 - 1987 (Calif.) RS - 1995 Base V6 (all sold) 2017 2SS “Tribute FIFTY” in Blue (HBM, 56R, 5VM, MX0, F55, NPP, RN2, RZ9, S0O, S0V, IO6 Tribute RPO: BR9, FTJ, 56Y, CJL)#teamBeckyD |
||
02-09-2020, 12:40 PM | #9 |
|
Service manual says Tighten 9 N-m (80 lb in)
|
02-09-2020, 04:19 PM | #10 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
It's in inch-pounds, not foot-pounds.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
Post Reply
|
|
|