Official I4 CAMARO6.COM 0 to 60 MPH Times - Page 20

Kevin_S17 · 10-13-2018, 01:27 AM

Day before my engine crapped out I ran this time. The only mod I had was an Injen Evo7300.

cooper1965 · 10-13-2018, 08:20 AM

Daammn Evil! That with your drag wheel set up?

Evil-Bee-NH · 10-13-2018, 08:30 AM

Quote:

Originally Posted by cooper1965

Daammn Evil! That with your drag wheel set up?

Ya i've had them on all month because it's the end of the season and if I get a chance to go to the dragstrip i'm taking it. It's made for a few unsettling drives though it also being rain season.

cooper1965 · 10-13-2018, 08:37 AM

That thing is moving out hard bro!!

Evil-Bee-NH · 10-13-2018, 08:46 AM

Quote:

Originally Posted by cooper1965

That thing is moving out hard bro!!

Ya I've been practicing with how to launch the car after my last dragstrip day I got my PB into the 12s but the car kept braking loose when staging and causing issues probably my worn to hell brakes but I think something was on the track and got up into peoples wheel wells because I had a group of like 5 people and the 3 of us racing all had the same issue after the first set of test and tune runs. I tend to get much better times hard launching instead of 2krpm launching now.

Evil-Bee-NH · 10-13-2018, 08:47 AM

Updated the list finally.

Jeffs18RS · 10-24-2018, 05:28 AM

All stock quite a bit of wheel spin. Also taking off at 3000 rpms and I also way 300 pounds.

Kevin_S17 · 10-24-2018, 12:57 PM

Quote:

Originally Posted by Jeffs18RS

All stock quite a bit of wheel spin. Also taking off at 3000 rpms and I also way 300 pounds.

Have you tried launching between 2,000 and 2,500 rpms with TC off? What pressure is in your rear tires? It should help with the wheel spin.

Jason@JacFab · 10-24-2018, 01:01 PM

Quote:

Originally Posted by Jeffs18RS

All stock quite a bit of wheel spin. Also taking off at 3000 rpms and I also way 300 pounds.

Try launching at 2000, your wheel spin is killing you. I cut three 5.0's in the last 2 days. Stock tune. catless DP, and JacFab recirc valve are the only engine mods, running on stock tires 20" wheels. I also weigh 300.

Jeffs18RS · 10-24-2018, 07:24 PM

Quote:

Originally Posted by Kevin_S17

Have you tried launching between 2,000 and 2,500 rpms with TC off? What pressure is in your rear tires? It should help with the wheel spin.

Yeah i will have to try that and yes tc waa off. 36 psi and about 48 degrees out this morning.

Jeffs18RS · 10-24-2018, 07:28 PM

Quote:

Originally Posted by Jason@JacFab

Try launching at 2000, your wheel spin is killing you. I cut three 5.0's in the last 2 days. Stock tune. catless DP, and JacFab recirc valve are the only engine mods, running on stock tires 20" wheels. I also weigh 300.

Thats pretty dam good. Yeah i have the 20 inch wheels too. Yeah the wheel spin was bad. I was just screwing around just to see what it would do. It was the first time I did the 0-60. Im sure i could do better with lower tire pressure and a warmer day and lower rpms.

snowolf_rs · 12-16-2018, 08:44 PM

2017 A8
ZZP intake tube, ZZP catted downpipe, JacFab recirculation valve, tuned by danytech

cooper1965 · 12-16-2018, 10:09 PM

Nice time and Very nice car snowolf_rs! (pic attached)
Whats up with your tune, zzp then dannytech shortly after?

snowolf_rs · 12-16-2018, 10:13 PM

Quote:

Originally Posted by cooper1965

Nice time and Very nice car snowolf_rs! (pic attached)
Whats up with your tune, zzp then dannytech shortly after?

Yeah, had ZZP for about 2 weeks, then went with danytech when i saw his results compared to ZZP, and was not disappointed

10-13-2018, 01:27 AM	#267
Kevin_S17 Drives: 2017 2SS M6 Vert Summit White Join Date: Jul 2018 Location: Redwood City, CA Posts: 113 View My Garage	Day before my engine crapped out I ran this time. The only mod I had was an Injen Evo7300. Attached Images

10-13-2018, 08:20 AM	#268
cooper1965 Coopers Camaro Drives: 18 Flex Fuel LTG Join Date: Nov 2016 Location: St. Louis/Sullivan/Washington MO Posts: 933	Daammn Evil! That with your drag wheel set up? __________________ Flex Fuel tuned by me using HPT-:- ---My Build Thread--- -----My IG PAGe-----

10-13-2018, 08:37 AM	#270
cooper1965 Coopers Camaro Drives: 18 Flex Fuel LTG Join Date: Nov 2016 Location: St. Louis/Sullivan/Washington MO Posts: 933	That thing is moving out hard bro!! __________________ Flex Fuel tuned by me using HPT-:- ---My Build Thread--- -----My IG PAGe-----

10-13-2018, 08:47 AM	#272
Evil-Bee-NH 603 Camaros Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012 Location: Manchester, NH Posts: 6,779 View My Garage	Updated the list finally. __________________ MY 2017 I4 CAMARO BUILD JOURNAL \| YOUTUBE \| INSTAGRAM \| 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE \| 12.693s @ 105MPH 1/4 Mile

10-24-2018, 05:28 AM	#273
Jeffs18RS Drives: 2018 Camaro RS Join Date: Oct 2018 Location: High Falls NY Posts: 13	All stock quite a bit of wheel spin. Also taking off at 3000 rpms and I also way 300 pounds. Attached Images

12-16-2018, 08:44 PM	#278
snowolf_rs Drives: 2017 Summit White Camaro RS 1LT Join Date: Nov 2018 Location: Alabama Posts: 17	2017 A8 ZZP intake tube, ZZP catted downpipe, JacFab recirculation valve, tuned by danytech Attached Images

12-16-2018, 10:09 PM	#279
cooper1965 Coopers Camaro Drives: 18 Flex Fuel LTG Join Date: Nov 2016 Location: St. Louis/Sullivan/Washington MO Posts: 933	Nice time and Very nice car snowolf_rs! (pic attached) Whats up with your tune, zzp then dannytech shortly after? Attached Images __________________ Flex Fuel tuned by me using HPT-:- ---My Build Thread--- -----My IG PAGe-----

User Name		Remember Me?
Password