[Stealthy]

I decided to order GM part 12609623 to make my oil change a little easier and the plan back fired. This morning I started the oil change and when I screwed the filler tube on, it locked in place I saw in another thread that someone else had this problem but didnt quite explain how they got it unlocked and removed. Anyone else had this problem and maybe have a video on how to remove it? Here is a picture and the link to the oil filler tube.


https://www.amazon.com/dp/B0987R3D61...roduct_details

[2SS Capt]

Did you try pushing in and turning it?

[CalgaryZL1]

Originally Posted by Stealthy

I decided to order GM part 12609623 to make my oil change a little easier and the plan back fired. This morning I started the oil change and when I screwed the filler tube on, it locked in place I saw in another thread that someone else had this problem but didnt quite explain how they got it unlocked and removed. Anyone else had this problem and maybe have a video on how to remove it? Here is a picture and the link to the oil filler tube.


https://www.amazon.com/dp/B0987R3D61...roduct_details

You may have to go brute force counterclockwise to get lock tab to give. I was afraid of doing that with mine after hearing that it locks, so I shaved off the back square edge of the locking tab with a razor blade to prevent that from accidentally happening. If it’s possible to remove your valve cover, you may be able to get a pick in there to press down on tab.

[h018871]

shine a flashlight into the opening and wiggle/stick a pick behind the tab, pry the tab inward and turn 12609623 CCW to remove.
It's a bit of a bother, but can be done good luck

[Stealthy]

Originally Posted by 2SS Capt

Did you try pushing in and turning it?

Yes, it did not work.

[Stealthy]

Originally Posted by CalgaryZL1

You may have to go brute force counterclockwise to get lock tab to give. I was afraid of doing that with mine after hearing that it locks, so I shaved off the back square edge of the locking tab with a razor blade to prevent that from accidentally happening. If it’s possible to remove your valve cover, you may be able to get a pick in there to press down on tab.

I will try to remove it with brute force before I remove the valve cover. After I do finally get it removed I will be shaving off that tab too lol

[Stealthy]

Originally Posted by h018871

shine a flashlight into the opening and wiggle/stick a pick behind the tab, pry the tab inward and turn 12609623 CCW to remove.
It's a bit of a bother, but can be done good luck

Thanks!

[CalgaryZL1]

Originally Posted by h018871

shine a flashlight into the opening and wiggle/stick a pick behind the tab, pry the tab inward and turn 12609623 CCW to remove.
It's a bit of a bother, but can be done good luck

Great idea that should work. the tab will be on the bottom and the gap you are looking for should be exactly 6 o’clock

[Stealthy]

Originally Posted by CalgaryZL1

Great idea that should work. the tab will be on the bottom and the gap you are looking for should be exactly 6 o’clock

Was able to get it removed. Thanks for the help, I ended up using a dentist tooth pick to grab onto the plastic tab and turn at the same time. I'm cutting off that tab right now with a dremel.

[bandier]

Holy Sh!t I got one of these filler tubes and haven't used it yet. I would be way pissed if it locked on me. I am stoked I stumbled on this post. Demel time, shave that bitch!!!